7356
35
Zoom out
Zoom in
Previous page
1/64
Next page
EN 35
Set tape speed
Press SP/EP to set the tape speed.
Return to normal screen
Press PROG. or OK.
PROGRAM COMPLETED appears on the
screen for about 5 seconds, then normal screen
appears.
If PROGRAM NOT COMPLETED PROGRAM
OVERLAP appears, you have another program
overlapping the program you have just made.
The Program Check screen appears and
conflicting programs will start blinking.
You can now correct the conflicting programs.
See When programs overlap each other on
page 37.
Engage timer recording standby mode
Press TIMER.
The VCR turns off automatically and is
displayed on the front panel display.
To timer-record daily (MondayFriday) or weekly
serials
Press DAILY (M-F) (number 8) or WEEKLY (number
9) anytime during steps through .
DAILY or WEEKLY appears on the Program screen.
Pressing the button again makes the corresponding
indication disappear.
To use the VCR while it is in timer recording standby
mode
Press TIMER to cancel the timer recording standby
mode, then press POWER to turn on the VCR.
DO NOT forget to put the VCR into timer recording
standby mode again by pressing TIMER after you use the
VCR; otherwise, you cannot record the broadcast you
want.
When AUTO TIMER ( pg. 38, 39) is set to ON,
the timer recording standby mode is automatically
engaged when the VCR is turned off. It is temporarily
canceled when the VCR is turned on. You do not have
to press TIMER to engage or disengage the timer
recording standby mode.
ATTENTION FOR DBS RECEIVER USERS
If you are using a DBS
receiver (unless DBS
RECEIVER SET is set to
OFF pg. 19), the band
indication (TV, CATV or
DBS) appears under the
channel number
indication.
TV :To timer-record a regular TV broadcast
received on the VCR.
CATV :To timer-record a cable TV broadcast
received on the VCR, or through a cable box
(unless CABLE BOX SET is set to OFF
pg. 16).
DBS :To timer-record a satellite broadcast
received through a DBS receiver.
NOTE:
If BAND is set to TV on the Tuner Set screen (
pg.
13) and CABLE BOX SET is set to OFF on the Cable
Box Set screen (
pg. 16), CATV will not be displayed
on the Program screen; If BAND is set to CATV or
CABLE BOX SET is set to ON, TV will not be
displayed.
If the channel number entered requires that the band
be set, 7=DBS is displayed on the screen.
If this happens, press the Number key 7 (DBS) to
select DBS.
PROGRAM 1
START STOP
8:00AM = 9:00PM
DATE CH
12/24/00 110 SP
SUN DBS
PRESS (+/, SP/EP, 8=DAILY,
9=WEEKLY, 7=DBS), THEN (0K)
PRESS (PROG.) TO END
NOTES:
Even if a power failure occurs, the VCR keeps your timer
programs. However, the clock time, channel settings, and
other menu settings are lost if it lasts for more than 3 minutes.
As a result, when the power is supplied again to this VCR
after the power failure, the following will take place.
1. This VCR starts the Plug & Play setting automatically to
restore the clock time and channel setting.
2. If the clock time and channel setting are restored correctly,
each timer program you have made will start unless its end
time already passes.
Programs that start after midnight must have the next days
date.
After timer recording is completed, the VCR turns off
automatically.
You can program the timer recording while a regular
recording is in progress; the menu screens will not be
recorded.
If the tape reaches its end during timer recording, the cassette
is automatically ejected.
To timer-record cable or satellite channels, be sure to keep
the cable box or DBS receiver turned on.
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC HR-VP78U at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC HR-VP78U in the language / languages: English as an attachment in your email.

The manual is 1,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info