Manual JVC hr-v610 (page 8 of 16) (English)

134631

Zoom out

Zoom in

1/16

Page 8 June 7, 2004 1:31 pm

—8—

Timer Recording

Up to 8 timer recording programs can be made using G-CODE/

HOWVIEW timer programing (for HR-V610AG and HR-V610AJ

only) or Express timer programing method as far as a year in

advance. Remember, the clock must be set before you can

program the timer.

NOTES:

● If all the 8 programs have already been set, “PROGRAM FULL”

appears on the TV screen.

● After timer recording is completed, the recorder turns off

automatically.

● You can program the timer recording while a regular recording

is in progress; the menu screens will not be recorded.

● In case of a power failure after programming, the recorder’s

memory backup keeps your selections (if the lithium battery is

not exhausted).

● If the tape reaches its end during recording, the recording stops

and “

” and “

$” on the front display panel blink. Press 1

then

on the recorder to eject the cassette or press 3

on the remote control to rewind the tape.

G-CODE

™

/SHOWVIEW

™

System Setup

(For HR-V610AG and HR-V610AJ only)

INFORMATION

G-CODE and SHOWVIEW are different trademarks used to represent

the same easy recording feature, but only the term G-

CODE system

will be used in the instructions. If you use the S

HOWVIEW system,

follow the same instructions listed for the G-

CODE system.

The G-

CODE timer programming system eliminates the need to

input channel, date, start and stop time data when setting the

timer record function. Simply key in the G-

CODE number for the

TV programme you wish to record (found in most TV listings) and

the recorder's timer is automatically programmed.

You have to set “GUIDE PROG” numbers, which are assigned to

each station for purposes of G-

CODE timer programming, for all

the stations stored in your recorder’s memory to get proper results.

Before G-

CODE setup you must have performed the procedures of

Tuner Set and Clock Set.

IMPORTANT

Perform the following procedure after Auto Set Up and/or the

channel setting steps.

After setting the Guide Program Numbers, channel positions may

be incorrect if you stored or skipped channels. In this case, re-

perform Guide Program Number setting.

Guide Program Number Set

A Access Main Menu screen, then Initial Set screen

Press MENU on the remote control. Press rt to place the

pointer next to “INITIAL SET”, then press OK or

B Access G-CODE/SHOWVIEW Setup screen

Press rt to place the pointer next to “G-CODE/SHOWVIEW

SETUP”, then press OK or

C Input Guide Prog number

Press rt or the Number keys to select

the Guide Program number as shown in

the TV listing, then press OK or

D Input receiving channel number

Press rt or the Number keys to select

the number of the channel on which the

Guide Program number’s broadcasts are

received, then press OK or

● If the satellite broadcast is received on your recorder's auxiliary

channel (“L-1” or “F-1”), select “L-1” or “F-1” for the channel

position to which the satellite receiver is connected.

● Repeat steps

3 and 4 as necessary.

E Return to normal screen

Press MENU on the remote control.

G-CODE

™

/SHOWVIEW

™

Timer

Programing

(For HR-V610AG and HR-V610AJ only)

The G-CODE numbers are the numbers

next to the program in most TV listing.

● Remember, the clock must be set

before you can program the timer.

● Be sure to read “G-

CODE

™

HOWVIEW

™

System Setup”.

● Load a cassette with the record safety

tab intact. The recorder turns on, and

the counter is reset, automatically.

● Select the appropriate colour system

with “PAL/MESECAM” and “NTSC”

in Function settings.

A Press PROG on the remote control

to access the G-

CODE/SHOWVIEW

screen.

B Press the appropriate Number keys to input the G-CODE

number, then press OK. Check to make sure the setting is

accurate on the G-

CODE Program screen.

● If the G-

CODE/SHOWVIEW Setup

screen appears after pressing OK,

press the Number keys, PR+/– or

rt to input the number of the

channel on which the broadcast for

the G-

CODE number is received on

the recorder, then press OK.

● To set the tape speed, press SP/LP/EP (

p).

● To change the stop time, press STOP+/–.

● To timer-record daily (Monday–Friday) or weekly serials,

press DAILY (number key 8) or WEEKLY (number key 9).

Pressing the button again makes the “DAILY” or “WEEKLY”

display disappear.

● If you made a mistake, press & to access the G-

CODE/

HOWVIEW screen again.

● If an incorrect G-

CODE/SHOWVIEW number or the one for a

broadcast already finished has been input, “ERROR” is

displayed for about 5 seconds, then the G-

CODE/SHOWVIEW

screen reappears.

C Press OK or PROG.

● If “PROGRAM OVERLAPPED” appears, see “Program

overlap warning display” (

 9).

D Press #. The recorder turns off automatically and “#” is

displayed on the display panel.

G-CODE/SHOWVIEW SETUP

GUIDE PROG TV PROG

2 5

[0–9] OR [ / ] : SELECT

[MENU] : EXIT

G-CODE/SHOWVIEW SETUP

GUIDE PROG TV PROG

2 5

[0–9] OR [ / ] : SELECT

[MENU] : EXIT

G-CODE/SHOWVIEW NO.

[0 – 9]

[+/–] : EXPRESS PROGRAMING

[PROG] : EXIT

[0 – 9]

[ ] : DELETE

[PROG] : EXIT

G-CODE/SHOWVIEW NO.

1 2 3 4 5 6 7 8

: [OK]

– P1 –

NO. 12345678

START STOP

21:00 22:00

DATE TV PROG

25.04 1

G-CODE/SHOWVIEW SETUP

GUIDE PROG TV PROG

2 5

[0–9] OR [ / ] : SELECT

[PROG] : EXIT

HR-V610AA.AG.AJ_EN_B.fm Page 8 Monday, June 7, 2004 1:31 PM

Downloaded from www.Manualslib.com manuals search engine

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of JVC hr-v610 in the language / languages: English as an attachment in your email.

The manual is 0,92 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of JVC hr-v610

JVC hr-v610 User Manual - German - 16 pages

JVC hr-v610 User Manual - Dutch - 16 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

JVC hr-v610 Manual

Product: