57355
6
Zoom out
Zoom in
Previous page
1/16
Next page
6 EN
Initial Settings
Selecting the Language
The following steps should only be performed if there is a
power failure or if the VCR is unplugged for more than 30
seconds.
Use the remote control for this procedure.
1) Turn on the TV and select the video channel on the TV.
2) Press
/I (STANDBY-ON).
3) Press
PLAY B / K or STOP C / L repeatedly to select your
desired language.
4) Press MENU.
Changing the Language
If you want to change the language used on the TV screen
menus, follow the steps below.
Use the remote control for this procedure.
1) Press
MENU.
2) Press
PLAY B / K or STOP C / L to select “INITIAL”, then
press
F.FWD g / B.
3) Press
PLAY B / K or STOP C / L to select “LANGUAGE”,
then press
F.FWD g / B.
4) Press
PLAY B / K or STOP C / L repeatedly to select your
desired language.
5) Press MENU.
Video Channel Setting
Video channel setting will be necessary, if your VCR is
connected to the TV via the RF cable.
Use the remote control for this procedure.
1) Insert a pre-recorded tape into the VCR.
The VCR will turn on and start playback automatically.
If playback does not start, press
PLAY B / K.
2) Select and adjust your TV to channel 36.
If the playback picture appears on the TV screen,
continue with step
8).
If channel 36 is set for broadcasting, or interference lines
appear on the picture, the RF converter must be set to a
different channel between CH22 and CH69. Continue
with step
3).
3) Press
MENU.
4) Press PLAY B / K or STOP C / L repeatedly to select to
“INITIAL”. Then, press
F.FWD g / B.
5) Press
PLAY B / K or STOP C / L repeatedly to select to “RF
OUT”. Then, press
F.FWD g / B. The RF OUT CH
menu will appear.
6) Press
PLAY B / K or STOP C / L to select a channel which
is not used for broadcasted between channel 22 and
channel 69 in your area, then press F.FW D g / B.
7) Press
MENU to exit.
Set the TV channel to the RF OUT CHANNEL which
was selected on the VCR. A picture from the VCR will
appear on the TV screen. If a picture does not appear,
repeat steps 3) to 7) using a different channel which is not
used for broadcasted.
8) Press
STOP C / L to stop the tape.
Note: You may also access the RF OUT CH menu by
pressing and holding MENU on the remote control for
3 seconds during power off until the RF OUT CH
menu appears.
If this unit and your TV are connected using a scart
cable, the RF converter may be switched off to avoid
any possibility of interference. To switch off the RF
converter, follow steps 3) to 5) above and press
STOP C / L repeatedly until “- -” appears next to “RF
OUT CH.” Press F.FWD g / B, then MENU to exit.
Setting the Clock
This VCR incorporates a 24-hour clock. The clock must be set
for the Timer Recording function to operate correctly.
Use the remote control for this procedure.
1) Press MENU.
2) Press
PLAY B / K or STOP C / L to select “INITIAL”, then
press
F.FWD g / B.
3) Press
PLAY B / K or STOP C / L to select “CLOCK”, then
press
F.FWD g / B.
4) Press
PLAY B / K or STOP C / L until the relevant year
appears, then press
F.FWD g / B.
5) Press
PLAY B / K or STOP C / L until the relevant month
appears, then press
F.FWD g / B.
6) Press
PLAY B / K or STOP C / L until the relevant day
appears, then press
F.FWD g / B.
7) Press
PLAY B / K or STOP C / L until the relevant hour
appears, then press
F.FWD g / B.
8) Press
PLAY B / K or STOP C / L until the relevant minute
appears.
9) Press
MENU to start the clock.
LANGUAGE
DEUTSCH
ITALIANO
ESPAÑOL
NEDERLANDS
FRANÇAIS
SVENSKA
ENGLISH
[ ]
MENU
TIMER
SET UP
INITIAL
INITIAL
CH TUNING
CLOCK
RF OUT
LANGUAGE
LANGUAGE
DEUTSCH
ITALIANO
ESPAÑOL
NEDERLANDS
FRANÇAIS
SVENSKA
ENGLISH
[ ]
MENU
TIMER
SET UP
INITIAL
RF OUT CH 36
INITIAL
CH TUNING
CLOCK
RF OUT
LANGUAGE
HM4N0ED(EN).fm Page 6 Friday, January 13, 2006 5:39 PM
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC HR-V520 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC HR-V520 in the language / languages: English as an attachment in your email.

The manual is 0,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of JVC HR-V520

JVC HR-V520 User Manual - German - 16 pages

JVC HR-V520 User Manual - Dutch - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info