584573
13
Zoom out
Zoom in
Previous page
1/16
Next page
January 31, 2003 6:13 pm Page 13
13
Master Page: Right
Timer Programming
A Press MENU. Press w e to select the icon
REC, then press OK. The programme list
appears.
B Press OK.
C Press the appropriate number keys to
set the channel, date, start time and stop
time. Input 0 before any single number
entries.
To time-record daily (MondayFriday) or
weekly serials, press w e to select the
DATE setting, then press OK. Press w
e, then press OK.
To set VPS/PDC, press w e to select the
space between the stop time and the
tape speed, then press rt. If you set
VPS/PDC to ON, “” appears.
VPS/PDC Recording below.
HR-V505/V506/V507E only
To set the tape speed (SP/LP/IP), press w
e to select the tape speed, then press
rt.
Intelligent LP Recording (HR-V505/V506/V507E only) on
the right column.
D Press MENU. Press MENU again to return to normal screen.
E Press 1. The recorder enters timer standby mode. The timer
indicator and standby/record indicator light on the display panel.
If a cassette has not loaded when the recorder enters the timer
standby mode, the timer indicator blinks on the display panel.
To timer-record a satellite broadcast using Timer Programming:
A
Perform steps
1
5
. In step
3
, set the channel position to
AV2.
B
Set the satellite receiver to the appropriate channel before the
selected programme begins.
C
Leave the satellite receivers power on.
VPS/PDC Recording
Now available from some TV stations, PDC (Programme Delivery
Control) and VPS (Video Programme System) are service designed
to assure safe, accurate timer recording. With this system, your
recorder will start and stop recording when the preset TV
programmes actually start and end even if the broadcast time of
a preset TV programme is changed.
NOTES:
PDC recording is not possible in Central and Eastern Europe.
It is not possible to set the tape speed to IP with VPS/PDC
set to ON.
When you use Timer Programming, set the start time (VPS or
PDC time) exactly as advertised in the TV listing.
Intelligent LP Recording (HR-V505/V506/V507E only)
When you set the tape speed to IP, the recorder automatically
switches to LP mode to allow complete recording if there is not
enough tape to record the entire programme while timer-
recording in SP mode.
For example, recording a programme of 210 minutes in length
onto a 180-minute tape.
NOTES:
If you have programmed the recorder to timer-record 2 or more
programmes, do not use this function, but change the tape
speed manually during timer programming.
There may be some noise and sound disturbance where the
tape speed switches from SP to LP mode on the tape.
This function is not available during ITR (Instant Timer
Recording), and will not work properly with any tapes longer
than E-180 or with some tapes of shorter lengths.
It is not possible to set the tape speed to IP with VPS/PDC
set to ON.
Checking, canceling or changing programme
settings
A
Disengage timer recording standby mode
Press 1.
B
Access Main Menu screen
Press MENU. Press w e to select the icon
REC, then press OK. The programme list
appears.
C
Cancel or change programme setting
To cancel a programme, press rt to
select the programme you want to delete,
then press w.
To change a programme, press rt to
select the programme, then press OK.
Press w e to select the item you want to
change, then press the number keys or rt to change the settings.
After confirming all information is correct, press MENU.
D
Return to normal screen
Press MENU.
E
Re-engage timer recording standby mode
Press 1. The recorder enters timer standby mode. The timer
indicator and standby/record indicator light on the display panel.
REC
ARD
- -
Approximately 150 minutes Approximately 60 minutes
SP mode LP mode
Total 210 minutes
REC
HR-V505_205E-001EN.fm Page 13 Friday, January 31, 2003 6:13 PM
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC HR-V206E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC HR-V206E in the language / languages: English as an attachment in your email.

The manual is 1,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of JVC HR-V206E

JVC HR-V206E User Manual - Dutch - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info