136367
10
Zoom out
Zoom in
Previous page
1/16
Next page
January 31, 2003 6:13 pm Page 10
10
Master Page: Right
Basic Playback
A
Load a cassette
Make sure the window side is
up, the rear label side is facing
you and the arrow on the front of
the cassette is pointing towards
the recorder.
Do not apply too much pressure when inserting.
The recorder turns on, and the counter is reset, automatically.
If the cassettes record safety tab has been removed, playback
begins automatically.
B
Start playback
Press 4.
If the tape reaches its end during playback, the recorder stops
playback, rewinds the tape and ejects the cassette, then enters
the standby mode automatically.
Variable Speed Search (HR-V505/V506/V507E only)
Playback Features
Adjusting tracking condition
Automatic tracking adjustment
When a new cassette is loaded, the recorder enters the automatic
tracking mode.
Manual tracking adjustment
If automatic tracking cannot eliminate noises well during
playback, adjust the tracking manually.
Press and hold PR + or to eliminate the noises.
Selecting Soundtrack (HR-V505/V506/V507E
only)
Your recorder is capable of recording four soundtracks (STEREO,
LEFT, RIGHT and MONO) and plays back the one you select. Set
AUDIO to the appropriate mode. (
5)
NOTE:
Set OSD to ON to display the indications on the screen.
(
5)
Rewind Power Off
When the tape is not running, press 3, then press 1. REW
blinks on the screen. The recorder enters the standby mode
automatically after rewinding the tape.
Ez (Easy) Power Off
During playback, press . The recorder stops playback,
rewinds the tape and ejects the cassette, then enters the standby
mode automatically.
Skipping unwanted portions
Skip Search
Press 30 SEC once to 6 times during playback. Each press
initiates a 30-second period of high-speed playback (up to
3 minutes). When the specified portion of the tape is skipped,
normal playback resumes automatically. To return to normal
playback during Skip Search, press 4.
Playback
Turn on the TV and select the AV mode or video channel.
During playback
Stop playback
Press 8 on the remote
control.
OR Press 0 on the recorder.
Pause playback and view still picture
Press 9.
The recorder enters Pause mode after moving 2 or 3 frames.
If there is vertical jitter, use the PR+/ to correct the picture.
Press 4 to resume normal playback.
Still picture playback stops automatically after about 5 minutes
to protect the heads.
Pause and Frame-by-Frame playback
Press 9 to pause, then press 9 repeatedly.
Press 4 to resume normal playback.
Slow-motion
HR-V505/V506/V507E
During still picture, press e to start forward slow motion
playback. If you press 9, still picture resumes.
HR-V205/V206E
During playback or still, press and hold 9 for 2 seconds, then
release it. Press 4 or 9 again to resume playback or still picture.
Slow motion playback stops automatically after about 30
seconds to protect the heads, then normal playback resumes.
High-Speed Search
Press 3 or 5.
Press 4 to resume normal playback.
High-speed search stops automatically after about 3 minutes to
protect the heads, then normal playback resumes.
Variable Speed Search (HR-V505/V506/V507E only)
Press w or e repeatedly.
Press 4 to resume normal playback.
Each time you press w or e, the playback speed changes. To
decrease the speed during picture search, press the opposite
direction button repeatedly.
If there is vertical jitter, use the PR+/ to correct the picture.
A
TTENTION:
In the search, still, slow-motion or frame-by-frame playback mode,
the picture will be distorted
the noise bars will appear
there will be a loss of color with an LP-recorded tape (HR-
V505/V506/V507E only)
Reverse
search
2steps
Reverse play
Forward
slow motion
1step
Normal play
Forward
search
2 steps
When the tape is not running
Rewind/fast-forward at high speed
Press 3 or 5.
If you press and hold 3 or 5 during rewinding or fast-
forwarding, you can see the picture on the screen. Releasing it
cancels the picture search and resume rewinding and fast-
forwarding.
Eject the cassette
Press . OR Press 0 on the recorder.
You can also eject the cassette when the recorder is standby
mode.
Turn off the recorder
Press 1 on the remote
control. The recorder enters
the standby mode.
OR Press 1 on the recorder.
The recorder turns off.
HR-V505_205E-001EN.fm Page 10 Friday, January 31, 2003 6:13 PM
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC hr v 206 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC hr v 206 in the language / languages: English as an attachment in your email.

The manual is 1,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of JVC hr v 206

JVC hr v 206 User Manual - German - 16 pages

JVC hr v 206 User Manual - Dutch - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info