658632
15
Zoom out
Zoom in
Previous page
1/32
Next page
—15—
Express Timer Programing
Load a cassette with the record safety tab intact. The VCR turns
on, and the counter is reset, automatically.
A
Press PROG. on the Remote to access the PlusCode No. screen.
B
Press START+/– once to access
Program screen.
Press START+/–, STOP+/–, DATE+/ or
CH+/– repeatedly to enter the start
time, stop time, date or channel.
Press and hold START+/– or STOP+/–
to increase the time in 30-minute
intervals.
To set the tape speed, press SP/EP (
p
).
To timer-record daily (Monday–Friday) or weekly serials,
press DAILY (M-F) (Number key “8”) or WEEKLY (Number
key “9”). Pressing the button again makes the “DAILY” or
“WEEKLY” display disappear.
If you are using a DBS receiver and
“DBS RECEIVER SET” is set to “ON”,
the band indication appears under
the channel number indication.
(Refer to “Cable Box and/or DBS
Receiver Control Setting” (
pg. 8).)
TV: To timer-record a regular TV
broadcast received on the VCR.
CATV: To timer-record a cable TV broadcast received on the
VCR, or through a cable box (unless “CABLE BOX
SET” is set to “OFF”).
DBS: To timer-record a satellite broadcast received through
a DBS receiver.
If the channel number entered requires that the band be set
and “7=DBS” is displayed on the screen, press DBS (Number
key “7”) to select “DBS”.
C
Press OK or PROG..
If “PROGRAM NOT COMPLETED PROGRAM OVERLAP”
appears, see “Program overlap warning display” (
pg. 16).
D
Press TIMER (
#
). The VCR turns off automatically and “
#
” is
displayed on the display panel.
24HR Quick Programing
You can program a timer recording that starts within 24 hours
using the ADVANCED JOG dial on the VCR.
Load a cassette with the record safety tab intact. The VCR turns
on, and the counter is reset, automatically.
A
Press 24HR QUICK PROGRAM on the
VCR. “ ” starts blinking on the
display panel.
B
Turn the ADVANCED JOG dial to the
left or right to set the start time.
One click stop of the ADVANCED
JOG dial changes the time in 5-
minute intervals.
C
Push the ADVANCED JOG dial. “
starts blinking on the display panel.
Turn the ADVANCED JOG dial to the
left or right to set the stop time.
To set the tape speed, press SP/EP
(
p
).
D
Push the ADVANCED JOG dial. Turn
the ADVANCED JOG dial to the left or right to select the
channel, then press 24HR QUICK PROGRAM. The VCR turns
off automatically and “
#
” is displayed on the display panel.
NOTES:
If “Err” appears on the display panel, repeat the above steps
again.
When a menu screen is shown, you cannot use 24HR Quick
Programing function. Press MENU to return to normal screen,
and try again.
You can use 24HR Quick Programing function also when the
VCR is turned off.
For 24HR Quick Programing function, the program overlap
warning display does not appear even if some programs overlap
each other.
To use the VCR while it is in timer recording standby
mode
Press TIMER (
#
), then press POWER. After you use the VCR, press
TIMER (
#
) again to put the VCR into timer recording standby
mode.
Checking, canceling or changing program settings
A
Disengage timer
Press TIMER (
#
), then press POWER.
When “AUTO TIMER” is set to “ON” (
pg. 20), you do not
have to press TIMER (
#
).
B
Access Program Check screen
Press PROG. CHECK.
C
Access Program screen
Press PROG. CHECK again. Each time you
press PROG. CHECK, the next program’s
Program screen appears.
D
Cancel or change program setting
To cancel a program, press CANCEL when the Program screen you
do not want is shown.
To change a program, press the appropriate button: START+/–,
STOP+/–, DATE+/, CH+/–, DAILY (M-F) (Number key “8”),
WEEKLY (Number key “9”), and/or SP/EP (
p
) when the
Program screen on which you want to make changes is shown.
E
Return to normal screen
Press PROG. CHECK repeatedly until no Program screen is
shown.
F
Reengage timer recording standby mode
Press TIMER (
#
). The VCR turns off automatically and “
#
” is
displayed on the display panel.
When “AUTO TIMER” is set to “ON” (
pg. 20), the timer
recording standby mode automatically resumes when you turn
off the VCR.
Start time
Stop time
Channel number
HR-S9911U-EN.fm Page 15 Monday, April 22, 2002 1:34 PM
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC HR-S9911U at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC HR-S9911U in the language / languages: English as an attachment in your email.

The manual is 3,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info