658631
66
Zoom out
Zoom in
Previous page
1/88
Next page
66 EN
JLIP
Edit To Or
From Another
VCR
Another VCR (for recording)
Audio/video
cable (supplied)
This VCR (for playback)
To AUDIO/
VIDEO OUT
Connection
Ex. When using this VCR as the playback VCR
To Audio/
video Input
EDITING (cont.)
To S VIDEO
OUT
To S-video
Input
S-video cable
(supplied)
You can use your VCR as the playback or recording VCR.
Refer also to the other VCRs instruction manual for
connection and its operations.
Make connections
Connect an audio/video cable between the
playback VCRs audio/video output connectors
and the recording VCRs audio/video input
connectors.
When using this VCR as the recording VCR,
connect this VCRs audio/video input
connectors to the audio/video output
connectors on the other VCR.
If the playback VCR is monaural, connect the
audio output connector on the playback VCR
to the left audio input connector on this VCR.
Load cassettes
Insert the playback cassette into the playback
VCR and the cassette to be recorded on into the
recording VCR.
Select input mode on recording VCR
Select the correct external input on the other
VCR.
On this VCR (when using this VCR as the
recording VCR);
Select L-1 when connecting the other
VCR to the audio/video input
connectors on the rear panel.
Select F-1 when connecting the other
VCR to the audio/video input
connectors on the front panel.
On the front panel:
Press CH5∞.
On the Remote:
Press the Number key 0 (AUX) and/or
CH +/.
NOTES:
When using this VCR as the recording VCR, set the
video input terminal setting correctly (
pg. 56 and
60).
When using this VCR as the playback VCR for
editing, set DIGITAL R3 to OFF (
pg. 58).
Select edit mode
On this VCR, set PICTURE CONTROL to
EDIT by following the procedure described on
pages 56 and 57.
Start playback
Press PLAY ( 3 ) on the playback VCR.
NOTE:
If the playback VCR is equipped with a superimpose/
OSD disable feature then set it to OFF before starting
playback (
pg. 56 and 57).
Start recording
Press REC ( ) on the recording VCR.
NOTE:
Be sure to select AUTO for PICTURE CONTROL (or
NORM when VIDEO CALIBRATION is set to OFF) after
you finish dubbing the tapes (
pg. 56 and 57).
66


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC HR-S9900U at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC HR-S9900U in the language / languages: English as an attachment in your email.

The manual is 2,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info