658631
28
Zoom out
Zoom in
Previous page
1/88
Next page
28 EN
Basic
Recording
This VCR can check the tape condition during recording
(and playback), and realizes the best possible pictures.
In addition, this VCR is equipped with the Video
Navigation function, which allows you to quickly
locate the programs you have recorded on a tape.
When recording on this VCR, the tapes are
automatically numbered so that every tape recorded
on this VCR has a different tape number. With this
function, the program information such as recording
date, start time, channel number, and recording
speed are also automatically stored in the VCRs
memory.
For the Video Navigation function, see page 46.
To memorize the recording date and start time for
the Video Navigation function, the date and clock
must be set correctly.
Load a cassette
Make sure the record safety tab is intact. If not,
cover the hole with adhesive tape before
inserting the cassette.
Select recording channel
On the front panel:
Press CH5∞.
On the Remote:
a Press CH + or .
or
b Press the Number keys.
If you connect the TV and the VCR only using
the RF connection, press TV/VCR on the Remote
so that the VCR mode indicator lights on the front
display panel, to view the program to be recorded.
Set tape speed
Press SP/EP ( ) to set the recording speed.
Start recording
On the front panel:
Press REC ( ).
On the Remote:
While holding REC ( ), press PLAY ( 3 ).
If VIDEO CALIBRATION is set to ON
(default setting: pg. 57), this VCR checks the
tape condition for about seven seconds, then
starts recording. This means that the first seven
seconds of the program will not be recorded. If
this is inconvenient for you, follow the steps
below:
Press REC ( ) and PAUSE ( 8 ) to start
Video Calibration.
Then press PLAY ( 3 ) to start recording
after Video Calibration is complete.
Turn on the VCR and the TV, and select the VCR
channel 3 or 4 (or AV mode) on the TV.
STOP/EJECT
( 7 / 0 )
TIME SCAN
SHUTTLE ring
PAUSE ( 8 )
PLAY ( 3 )
POWER
123
456
7
89
0
VCR TV CABLE/DBS
STOP ( 7 )
FF ( ¡ )
REW ( 1 )
a
b
POWER
PAUSE ( 8 )
TV/VCR
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC HR-S9900U at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC HR-S9900U in the language / languages: English as an attachment in your email.

The manual is 2,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info