658631
15
Zoom out
Zoom in
Previous page
1/88
Next page
EN 15
Setting ghost reduction
This VCR is equipped with the ghost reduction function.
It reduces the ghosts using a GCR (Ghost Canceller
Reference) signal sent from a TV station. The ghost
reduction mode can be set for each channel
independently and manually.
NOTES:
Ghosts may not be reduced in the following cases:
The broadcasting signal does not have a GCR signal.
The antenna is not connected correctly.
There are too many ghosts.
The signal is reflecting from moving objects (airplane, etc.).
The images on the screen may be distorted when tuning from
one channel to another or the power is turned on while the
ghost reduction function is activated.
Access Main Menu screen
Press MENU.
Access Tuner Set screen
On the front panel:
Press CH5∞ to move the highlight bar (arrow) to
TUNER SET, then press OK.
On the Remote:
Press %fi to move the highlight bar (arrow) to
TUNER SET, then press OK or
#
.
Access Manual Channel Set screen
On the front panel:
Press CH5∞ to move the highlight bar (arrow) to
MANUAL CHANNEL SET, then press OK.
On the Remote:
Press %fi to move the highlight bar (arrow) to
MANUAL CHANNEL SET, then press OK or
#
.
Select a channel and set ghost reduction
mode
On the Remote ONLY:
Press the Number
keys or %fi to input
a channel number.
Press SP/EP ( ) to
select the desired
ghost reduction mode.
You have three choices:
STANDARD Normally select this
SOFT Select when you prefer softer picture
than when STANDARD is selected.
OFF Select when neither STANDARD
nor SOFT improves the picture.
Return to normal screen
Press MENU.
What is a ghost?
Double images of a TV program, or a ghost, is a
common problem with TV reception in urban areas. A
broadcasting signal, reflected from some surfaces (building,
mountain, etc.), arrives slightly later than the signals
arriving directly from the TV station. This causes such
ghosts as follows:
Double images
Faint images
Distorted images
Distorted colors
Vertically jittered images
MANUAL CHANNEL SET
(CATV)
CH 45 ADD
GR STANDARD
PRESS NUMBER KEY (09)
OR (5,), THEN (OK)
GR MODE: PRESS (SP/EP)
PRESS (MENU) TO END
123
456
7
89
0
VCR TV CABLE/DBS
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC HR-S9900U at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC HR-S9900U in the language / languages: English as an attachment in your email.

The manual is 2,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info