658630
14
Zoom out
Zoom in
Previous page
1/76
Next page
14 EN
INITIAL SETTINGS (cont.)
Add Or Delete A Channel
ACCESS MAIN MENU SCREEN
1
Press MENU.
ACCESS TUNER SET SCREEN
2
Move the highlight bar (arrow) to "TUNER SET" by
pressing CH5∞ or TIME SCAN %fi, then press OK or
TIME SCAN
#
.
ACCESS MANUAL CHANNEL SET
SCREEN
3
Move the highlight bar
(arrow) to "MANUAL
CHANNEL SET" by
pressing CH5∞ or TIME
SCAN %fi, then press OK
or TIME SCAN
#
.
ADD OR SKIP
DESIRED
CHANNEL
4
Input the channel number
using the NUMBER keys or
by pressing CH5∞ or
TIME SCAN %fi, then
press OK or TIME SCAN
#
to set to "SKIP". Repeat for
each channel you want to skip. Input the channel
number using the NUMBER keys, then press OK or
TIME SCAN
#
to set to "ADD" the channel.
RETURN TO NORMAL SCREEN
5
Press MENU.
TUNER SET
BAND CATV
AUTO CHANNEL SET
=MANUAL CHANNEL SET
GHOST REDUCTION (GR) ON
SELECT WITH (5,) AND (OK)
PRESS (MENU) TO END
Ghost Reduction
This VCR is equipped with the Ghost Reduction Tuner. It reduces
the ghosts based on a GCR (Ghost Canceller Reference) signal
sent from a TV station. The ghost reduction mode can be set for
each channel independently.
NOTES:
Ghosts may not be reduced in the following cases:
The broadcasting signal does not have a GCR signal.
The antenna is not connected correctly.
There are too many ghosts.
The signal is reflecting from moving objects (airplane, etc.).
The images on the screen may be distorted when tuning from
one channel to another or the power is turned on while the
ghost reduction tuner is activated.
ACCESS MAIN MENU SCREEN
1
Press MENU.
ACCESS TUNER SET SCREEN
2
Move the highlight bar (arrow) to "TUNER SET" by
pressing CH5∞ or TIME SCAN %fi, then press OK or
TIME SCAN
#
.
ACCESS MANUAL
CHANNEL SET SCREEN
3
Move the highlight bar (arrow) to "MANUAL CHANNEL
SET" by pressing CH5∞ or TIME SCAN %fi, then press
OK or TIME SCAN
#
.
SELECT CHANNEL AND GHOST
REDUCTION MODE
4
Input the channel number
using the NUMBER keys or
by pressing CH5∞ or
TIME SCAN %fi
.
Then
press SP/EP to select the
desired ghost reduction
mode.
STANDARD: Normally
select this.
SOFT: Select when you prefer softer picture than
when "STANDARD" is selected.
OFF: Select when neither STANDARD nor SOFT
improves the picture.
Repeat step 4 for other channels you want to set the
ghost reduction mode.
Changing the setting of the ghost reduction mode is
not possible during Record Pause.
RETURN TO NORMAL SCREEN
5
Press MENU.
MANUAL CHANNEL SET
(CATV)
CH 45 ADD
GR STANDARD
PRESS NUMBER KEY (0–9)
OR (5,), THEN (OK)
GR MODE: PRESS (SP/EP)
PRESS (MENU) TO END
To cancel the ghost reduction mode for all the channels
at once
Access TUNER SET screen (Z pg. 13, step 3), and select "OFF" for
"GHOST REDUCTION (GR)" by pressing TIME SCAN
#
or OK.
To check the ghost reduction mode for the current channel
Press OSD. (Z pg. 23)
MANUAL CHANNEL SET
(CATV)
CH 45 ADD
GR STANDARD
PRESS NUMBER KEY (0–9)
OR (5,), THEN (OK)
GR MODE: PRESS (SP/EP)
PRESS (MENU) TO END
About Ghosts
Double images of a TV program, or a "ghost", is a common
problem with TV reception in urban areas. A broadcasting
signal, because of being reflected from some surface (build-
ing, mountain, etc.), arrives slightly later than the signals
arriving directly from the TV station. This causes ghosts such
as followings:
Double images
– Faint images
Distorted images
Distorted colors
Vertically jittered images
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC HR-S9600U at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC HR-S9600U in the language / languages: English as an attachment in your email.

The manual is 2,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info