658629
57
Zoom out
Zoom in
Previous page
1/76
Next page
EN 57
Audio dubbing replaces the normal audio sound of a previously
recorded tape with a new soundtrack. Use your VCR as the
recorder.
Audio Dubbing
MAKE CONNECTIONS
1
Connect an audio component to the AUDIO IN L + R
connectors on the VCR's front panel. *When connect-
ing monaural equipment, use only the VCR's AUDIO
IN L connector.
SET INPUT MODE
2
Press the remote control's NUMBER key "0" and CH so
that "F-1" appears in place of a channel number.
Be sure to select "FRONT S-VIDEO" or "FRONT
VIDEO" at the AUX Input Screen. (To select the correct
AUX input connector, follow steps 46, 15 from the
"Edit From A Camcorder" section, Z pg. 54.)
LOCATE START POINT
3
Press PLAY to start playback of the tape in your VCR,
and press PAUSE when you find the point where you
want to start dubbing.
ENGAGE AUDIO DUBBING
4
Press A. DUB.
Your VCR enters the Audio Dubbing Pause mode.
( blinks, and light up on the front display
panel.)
START DUBBING
5
Engage the audio component's Play mode, then press
PLAY to start the tape in your VCR. Audio dubbing
begins at this point.
blinks and is displayed on the front display
panel.
To stop dubbing temporarily, press PAUSE. Press
PLAY to resume dubbing.
END AUDIO DUBBING
6
Press STOP to stop the tape in your VCR, and engage
the audio component's Stop mode.
Pre-recorded tape
Audio-dubbed tape
Normal audio track
Video/Hi-Fi audio
track
PLAY
Audio cable
Audio component
(CD player etc.)
NOTES:
When monitoring the sound during Audio Dubbing, the
normal soundtrack is automatically selected. If you wish to
hear the Hi-Fi or mixed sound (Hi-Fi + Normal soundtracks),
refer to the "Select The Soundtrack" section (
Z
pg. 30) and
select the soundtrack you wish to hear.
Audio dubbing stops automatically when the counter reaches
"0:00:00", and the VCR enters the Play mode. Check the
counter reading before dubbing.
Audio dubbing is also possible using the rear AUDIO IN
connectors. When using these connectors, be sure to select
"REAR S-VIDEO" or "REAR VIDEO" at the Aux Input screen.
To select the correct Aux Input connector, follow steps 46,
15 from the "Edit From A Camcorder" section
Z
pg. 54.
Audio dubbing cannot be performed on a cassette that has
had its record safety tab removed.
When playing back an audio-dubbed tape, refer to the "Select
The Soundtrack" section (
Z
pg. 30) to select the soundtrack
you wish to hear.
Picture may be distorted during Audio Dubbing Pause.
It may be unlawful to record or play back copyrighted
material without the consent of the copyright owner.
PAUSE
STOP
57


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC HR-S9500U at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC HR-S9500U in the language / languages: English as an attachment in your email.

The manual is 2,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info