658629
35
Zoom out
Zoom in
Previous page
1/76
Next page
EN 35
Digital TBC/NR
Your VCR is equipped with the Digital TBC (Time Base
Corrector) that removes jitter from fluctuating video signals to
deliver a stable picture even with old tapes and rental cassettes.
The on/off of Digital 3-DNR (Noise Reduction) which cuts noise
and enables clear picture reproduction is also linked to this
function.
* The default setting is "ON".
We recommend that you use the Digital TBC feature when...
... playing back a tape recorded on a camcorder.
... playing back a tape repeatedly used.
... using this VCR as the player for editing.
SELECT DIGITAL TBC/NR
SET MODE
1
Press DIGITAL TBC/NR so that the button lights up.
Pressing the button again turns off this function.
NOTES:
If you play back a tape recorded under poor TV reception
condition, there may be cases where the picture becomes
more stable with Digital TBC/NR set to off.
When Digital TBC/NR is set to on, if you play back a tape
where certain types of signals are recorded (using a PC or
some character generators), the playback picture may be
distorted. If this is the case, turn off Digital TBC/NR.
Digital TBC/NR and Video Stabilizer (
Z
pg. 28) cannot be
used at the same time; if you turn on Digital TBC/NR when
"VIDEO STABILIZER" is set to "ON", Video Stabilizer will be
automatically turned "OFF". Make sure Digital TBC/NR is off
when you want to use Video Stabilizer.
Digital R
3
Digital R
3
picture system applies edge correction to the luminance
signal to enhance detail.
ACCESS MAIN MENU
SCREEN
1
Press MENU.
ACCESS FUNCTION SET
SCREEN
2
Move the highlight bar
(arrow) to "FUNCTION
SET" by pressing CH5∞ or
TIME SCAN %fi, then
press OK or TIME SCAN .
SELECT DIGITAL R3 SET
MODE
3
Move the highlight bar
(arrow) to "DIGITAL R3" by
pressing CH 5∞ or TIME
SCAN %fi, then press OK
or TIME SCAN to set to
"ON".
RETURN TO NORMAL
SCREEN
4
Press MENU.
%
%
MAIN MENU
= FUNCTION SET
TUNER SET
INITIAL SET
HI-FI REC LEVEL CTL
PRESS (5,), THEN (OK)
PRESS (MENU) TO END
NOTES:
Normally it is recommendable to keep "DIGITAL R3" set to
"ON".
Depending on the type of tape being used, picture quality
may be better with "DIGITAL R3" set to "OFF".
If you use this VCR as the player for editing, be sure to set
"DIGITAL R3" to "OFF" before starting.
FUNCTION
AUTO TIMER OFF
SUPERIMPOSE ON
AUTO SP
=EP TIMER OFF
= DIGITAL R3 ON
VIDEO STABILIZER OFF
2ND AUDIO RECORD OFF
NEXT PAGE
SELECT WITH (5,) AND (OK)
PRESS (MENU) TO END
1
3
OK
MENU
MENU
OK
TIME SCAN
CH
DIGITAL TBC/NR
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC HR-S9500U at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC HR-S9500U in the language / languages: English as an attachment in your email.

The manual is 2,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info