658628
37
Zoom out
Zoom in
Previous page
1/76
Next page
EN 37
RETURN TO FUNCTION SET 1 SCREEN
5
Press MENU.
ACCESS CA PLAYBACK SCREEN
6
Press CH5
or TIME SCAN 5
to place the arrow
next to "CA PLAYBACK", then press OK.
SELECT MODE
7
Place the arrow next to
"AUTO" by pressing CH5
or TIME SCAN 5
.
Select "AUTO" to
automatically skip over
CA recorded commer-
cials during playback.
Select "MANUAL" to
manually skip over CA recorded commercials by
pressing SKIP SEARCH.
Select "OFF" to disable CA Playback of CA recorded
commercials.
Press SKIP SEARCH during playback, with "MANUAL"
(or "AUTO") selected, to fast-motion the tape to the
end of the next commercial group or to the end of the
recording, and then resume normal playback.
NOTE:
If you press SKIP SEARCH during a commercial, the
VCR may not resume normal playback at the end of the
group of commercial. If this occurs press PLAY or STOP
to resume normal playback.
RETURN TO NORMAL SCREEN
8
Press MENU as many times as necessary.
U.S. Pat. No. 5,333,091
ACCESS MAIN MENU SCREEN
1
Press MENU as many times as necessary.
ACCESS FUNCTION SET 1 SCREEN
2
Press CH
5
or TIME
SCAN
5
to place the
arrow next to "FUNCTION
SET 1", then press OK.
ACCESS CA RECORD SCREEN
3
Press CH
5
or TIME
SCAN
5
to place the
arrow next to "CA
RECORD", then press OK.
SELECT MODE
4
Place the arrow next to
"ON" by pressing CH
5
or TIME SCAN
5
.
If you don't want to use
Commercial Advance,
set it to "OFF".
FUNCTION 1
AUDIO MONITOR
TIMESCAN AUDIO
AUX INPUT
TAPE DUB MODE
= CA RECORD
CA PLAYBACK
HI-FI REC LEVEL
PRESS (5,), THEN (OK)
PRESS (MENU) TO END
"CA(Commercial Advance) RECORD" and "CA PLAYBACK" are
set to " OFF " at the factory. To set Commercial Advance
perform the following steps to set "CA RECORD" to "ON" and
"CA PLAYBACK" to "AUTO".
MAIN MENU
PROGRAM SET
TUNER SET
= FUNCTION SET 1
FUNCTION SET 2
FUNCTION SET 3
R.A. EDIT
PRESS (5,), THEN (OK)
PRESS (MENU) TO END
MENU
OK
8
CH
TIME SCAN
MENU
OK
CH
SKIP SEARCH
COMMERCIAL ADVANCE
RECORD
=ON
OFF
PRESS (5,) TO SELECT
PRESS (MENU) TO END
COMMERCIAL ADVANCE
PLAYBACK
=AUTO
MANUAL
OFF
PRESS (5,) TO SELECT
PRESS (MENU) TO END
NOTES:
If you set "CA RECORD" to "ON" while recording is in
progress, the VCR will mark an index code at that location.
You cannot change the "CA PLAYBACK" setting during
Commercial Advance fast-motion playback.
While recording is in progress with "CA RECORD" set to
"ON", you cannot mark an index code manually, nor change
the recording tape speed.
During playback with "CA PLAYBACK" set to "OFF", pressing
SKIP SEARCH starts fast-motion playback for 30 seconds on
the counter (
Z
pg. 39).
Adding or erasing index marks codes (
Z
pg. 29) during a
group of commercials can cause incorrect CA Playback.
If there is a power outage while recording is in progress
with "CA RECORD" set to "ON" (
Z
pg. 37), commercials
that are recorded after the power is restored may not be
detected properly.
If you want to stop recording when "CA RECORD" is set to
"ON" (
Z
pg. 37), be sure to press STOP. If you press
POWER or TIMER to stop recording, that may affect
detection accuracy for commercials recorded afterwards.
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC HR-S9400U at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC HR-S9400U in the language / languages: English as an attachment in your email.

The manual is 2,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info