658628

JVC HR-S9400U Manual

11
Zoom out
Zoom in
Previous page
1/76
Next page
EN 11
12
45
3
6
8
0
7
9
8
SELECT D.S.T. MODE
9
You have three choices:
a–Select “AUTO” and the
adjustment to your VCR’s
clock will be made
according to the incoming
signal from the host
channel.
b–Select “ON” and the
adjustment will be made
based on the clock itself.
c–Select “OFF” if Daylight Saving Time doesn’t apply to
you.
Place the arrow next to your choice by pressing CH5
∞
or TIME SCAN 5
∞
, then press MENU and the Semi-
Auto Clock Set screen reappears.
D.S.T. SELECT
=AUTO
ON
OFF
PRESS (
5
,∞) TO SELECT
PRESS (MENU) TO END
IMPORTANT
Turn the VCR off after performing the Semi-Auto Clock Set
procedure. "Auto" will appear on the front display panel
when the clock is being set. The current time will appear
automatically when the clock is set.
SELECT MODE
5
At the Override Auto Clock Set screen (Z pg. 10), place
the arrow next to “MANUAL CLOCK SET” by pressing
CH▲▼ or TIME SCAN
5
∞, then press OK.
SET DATE, TIME AND D.S.T.
6
The Manual Clock Set
screen is displayed and the
month digit begins blinking.
Press the appropriate
NUMBER keys to set the
date and time (if only 1
digit, press "0" first). Press
CH▲▼ or TIME SCAN
5
∞
to set AM/PM and D.S.T.
(Daylight Saving Time). Press OK after AM/PM and D.S.T.
settings.
Set D.S.T. to "ON" to set the D.S.T. according to the
VCR's clock or to "OFF" if D.S.T. doesn't apply to you.
When you’re finished with this set-up procedure, press
MENU to start the clock.
NOTE:
CH
5
∞
and TIME SCAN
5
∞
can be used to perform all
operations. (In this case, press OK after each setting.)
MAKE CORRECTIONS
7
To change any of the settings, press OK or TIME SCAN
™ £ until the item you want to change blinks,
then set as in step 6.
Manual
SELECT MODE
5
At the Override Auto Clock Set screen, place the arrow
next to "AUTO CLOCK SET" by pressing CH▲▼ or
TIME SCAN
5
∞, then power off the VCR. Do not
power it on again until the clock has been adjusted.
The clock is automatically adjusted on the hour except
at 11:00 PM, midnight, 1:00 AM and 2:00 AM. (The
clock will be adjusted on the hour based on the time
displayed on the VCR, not on the actual real time.)
Auto
**AUTO DAYLIGHT SAVING TIME
This function enables automatic adjustment of the VCR’s
clock at the start and end of Daylight Saving Time.
With Auto DST activated, . . .
. . . on the first Sunday of April at 2:00 AM, the clock is
adjusted to 3:00 AM.
. . . on the last Sunday of October at 2:00 AM, the clock is
adjusted to 1:00 AM.
NUMBER
MANUAL CLOCK SET
DATE 1/ 1/97 WED
TIME – – : – – AM
D.S.T. ON
PRESS NUMBER KEY(0-9)
OR (5,∞), THEN (OK)
PRESS (MENU) TO END
CH
MENU
OK
TIME SCAN
MENU
CH
OK
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC HR-S9400U at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC HR-S9400U in the language / languages: English as an attachment in your email.

The manual is 2,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info