658623
24
Zoom out
Zoom in
Previous page
1/68
Next page
24
EN
BASIC PLAYBACK AND RECORDING (cont.)
Locating beginning of timer
recordings — Instant Review
At the press of a button, you can turn on the VCR,
rewind the tape and begin to view the most recent timer-
recorded program.
Press
on the Remote after ensuring that the
VCR is in the timer recording standby mode.
The VCR turns on, and rewinds to the index code
indicating the beginning of the last timer-recorded
program, then begins playback automatically.
You can access a program of 2 to 9 index codes away
from the current position on the tape. If, for example,
you have 5 programs recorded and you want to watch
the third one, press
three times.
If you want to find the very beginning of the desired program,
press REW ( 1 ) or FF ( ¡ ) after playback starts.
If the tape is already rewound when is
pressed, it will play the tape from the beginning. It will
not fast-forward to an index code.
The Instant Review function will also operate if the
VCR is turned on.
Adjusting picture condition
— Digital TBC/NR
The Digital TBC/NR (Time Base Corrector / Noise
Reduction) function removes jitter from fluctuating video
signals to deliver a stable picture even with old tapes
and rental tapes. The Digital R3 function which cuts
noise and reproduces clear pictures is also linked to this
function.
We recommend that you use the Digital TBC/NR
function when...
— playing back a tape recorded on a camcorder.
— playing back a tape repeatedly used.
— using this VCR as the player for editing.
Press DIGITAL TBC/NR on the front panel so that the
DIGITAL TBC/NR lamp lights up.
Each time you press the button, this function turns on
and off.
NOTES:
If you play back a tape recorded under poor TV reception
condition, the picture may happen to become more stable
with Digital TBC/NR activated.
If you play back a tape on which certain types of signals
(using a PC or some character generators) have been recorded
with Digital TBC/NR activated, the playback picture may be
distorted. In this case, deactivate Digital TBC/NR.
Digital TBC/NR and Video Stabilizer (
pg. 40) cannot be
used at the same time; if you turn on Digital TBC/NR when
“VIDEO STABILIZER” is set to “ON”, Video Stabilizer will be
automatically turned “OFF”. Make sure Digital TBC/NR is
deactivated when you want to use Video Stabilizer.
H
Other Useful functions for playback
You can also use the following functions for playback.
Video Calibration ( pg. 39)
When this function is set to “ON”, this VCR checks the
condition of the tape in use during playback and
recording, and compensates to provide the highest-
possible pictures.
Picture Control ( pg. 39)
This function helps you to adjust the playback picture
quality according to your preference.
Digital R3 ( pg. 40)
This function applies edge correction to the luminance
signal to enhance details and provides clear pictures.
Video Stabilizer ( pg. 40)
You can automatically correct vertical vibrations in the
picture when playing back unstable recordings made on
another VCR.
Blue Back ( pg. 40)
When this function is set to “ON”, the TV screen becomes
all blue in the following cases:
When receiving a channel not in use.
When stopping playback.
REC
PAUSE
PLAY
DIGITAL TBC/NR
MENU
OK
(MONO)L—AUDIO—RVIDEO
S-VIDEO
S-VHS ET
STOP/EJECT
POWER
FF
REW
CH
SP EP
VCR
I
I
123
456
7
89
0
2
4
1
3
H
FF ( ¡ )
REW ( 1 )
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC HR-S7800U at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC HR-S7800U in the language / languages: English as an attachment in your email.

The manual is 2,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info