655780
21
Zoom out
Zoom in
Previous page
1/68
Next page
Masterpage:Right-NoTitle0
EN
21
Filename [HRS7700EU1.fm]
Page 21 March 8, 2000 1:13 pm
Index Search
Your recorder automatically marks
index codes at the beginning of
each recording. This function gives
you quick access to any one of 9
index codes in either direction.
NOTE:
Before starting, make sure the
recorder is in the Stop mode.
Activate Index Search.
Press
w
or
e
(
2
or
6
). “
2
1” or “
6
1” is
displayed on the TV screen and search begins in the
corresponding direction.
To access index codes 2 through 9, press
w or e repeatedly
until the correct index number is displayed.
Example:
To locate the beginning of B from the current position, press
w
twice.
To locate the beginning of D from the current position, press
e
once.
When the specified index code is located, playback begins
automatically.
Next Function Memory
The Next Function Memory “tells” the recorder what to do after
rewinding. Before continuing, make sure the recorder is in the
Stop mode.
a-
For Automatic Start Of Playback
Press
3
, then press
4
within 2 seconds.
b-
For Automatic Power Off
Press
3
, then press
1
within 2 seconds.
c-
For Automatic Timer Standby
Press
3
, then press
#
(
TIMER
) within 2 seconds.
Manual Tracking
Your recorder is equipped with automatic tracking control.
During playback, you can override this and adjust the tracking
manually by pressing the
PR
buttons.
1
Override automatic tracking.
Press
p
on the remote control.
2
Adjust the tracking manually.
Press
PR
+
or
.
3
Return to automatic tracking.
Press
p
on the remote control.
NOTE:
When a new tape is inserted, the recorder enters the automatic
tracking mode automatically.
Digital TBC/NR
Your recorder is equipped with the Digital TBC (Time Base
Corrector) that removes jitter from fluctuating video signals to
deliver a stable picture even with old tapes and rental cassettes.
The on/off of Digital 3-DNR (Noise Reduction) which cuts noise
and enables clear picture reproduction is also linked to this
function.
* The default setting is on.
We recommend that you use Digital TBC/NR when...
... playing back a tape recorded on a camcorder.
... playing back a tape repeatedly used.
... using this video recorder as the source player for editing.
Activate Digital TBC/NR.
Press
DIGITAL TBC/NR
so that the button lights up.
To turn off Digital TBC/NR, press
DIGITAL TBC/NR
again so
that the light goes off.
NOTES:
If you play back a tape recorded under poor TV reception
condition, the picture may become more stable with Digital
TBC/NR set to off.
When Digital TBC/NR is set to on, if you play back a tape
where certain types of signals are recorded (using a PC or
some character generators), the playback picture may be
distorted. If this is the case, turn off Digital TBC/NR.
When playing back a MESECAM tape, Digital TBC/NR does
not function even though the DIGITAL TBC/NR button is lit.
Current position
Index number
HRS7700EU1.fm Page 21 Wednesday, March 8, 2000 1:14 PM
Downloaded from www.Manualslib.com manuals search engine
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC HR-S7711EU at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC HR-S7711EU in the language / languages: English as an attachment in your email.

The manual is 3,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info