Manual JVC HR-J645 (page 46 of 56) (English)

584562

Zoom out

Zoom in

1/56

TROUBLESHOOTING

Before requesting service for a problem, use this chart and see if you can repair the trouble yourself. Small problems are often easily

corrected, and this can save you the trouble of sending your video recorder off for repair.

POWER

POSSIBLE CAUSE

● The mains power cord is discon-

nected.

● “‰“ is displayed on the display

panel with Auto Timer set to "OFF".

SYMPTOM

1. No power is applied to the

recorder.

2. The clock is functioning properly,

but the recorder cannot be powered.

CORRECTIVE ACTION

Connect the mains power cord.

Press the TIMER button to turn the

“‰“ indicator off.

SYMPTOM

1. The tape does not run during

recording.

2. The tape stops during rewind or

fast-forward.

3. The tape will not rewind or fast-

forward.

CORRECTIVE ACTION

Press PLAY to turn the “^“ indicator

off.

Press C.MEMORY to deactivate the

Counter Memory function and turn

the “M“ indicator off.

Check the cassette.

TAPE TRANSPORT

SYMPTOM

1. The playback picture does not

appear while the tape is running.

2. Noise appears during visual search.

3. Noise appears during normal

playback.

4. Noise appears during slow-motion

playback.

5. Noise appears during still play-

back.

6. (HR-J645EK/ES only) Breaks are

noticeable in Hi-Fi soundtrack.

7. The playback picture is blurred or

interrupted while TV broadcasts are

clear.

PLAYBACK

POSSIBLE CAUSE

● If you’re using the RF OUT connec-

tion . . .

. . . the TV receiver’s channel selector

is not set to the VIDEO channel.

. . . the recorder's VIDEO channel

has not been correctly set.

● If you’re using the AV connection, the

TV receiver is not set to the AV mode.

● This is normal.

● The automatic tracking mode is

engaged.

● The automatic tracking mode is

engaged.

● Automatic tracking is engaged.

● The video heads may be dirty.

CORRECTIVE ACTION

If you are using the RF OUT connec-

tion . . .

. . . set the TV receiver to the VIDEO

channel. (Z pg. 6)

. . . Perform "Video Channel Set"

(Z pg. 6)

If you are using the AV connection,

set the TV to its AV mode.

Try manual tracking. (Z pg. 14)

Press TV PROG. + or – a few times to

remove the noise bars from the screen.

Engage and adjust tracking manually.

(Z pg. 14)

Consult your JVC dealer.

POSSIBLE CAUSE

● “^“ is displayed on the display

panel.

● “M“ is displayed on the display

panel.

● The tape is already fully rewound or

fast-forwarded.

CORRECTIVE ACTION

Insert a cassette, or using adhesive

tape, reseal the slot where the tab

was removed.

Set to the desired preset.

Confirm that the source is properly

connected.

Confirm that all units’ power switches

are turned on.

Set the input mode to “AU”.

POSSIBLE CAUSE

● There is no cassette loaded, or the

cassette loaded has had its Record

Safety tab removed.

● “AU” has been selected as the input

mode.

● The source (another video recorder,

camcorder) has not been properly

connected.

● All necessary power switches have

not been turned on.

● The input mode is not correct.

SYMPTOM

1. Recording cannot be started.

2. TV broadcasts cannot be recorded.

3. Tape-to-tape editing is not possible.

RECORDING

Downloaded from www.Manualslib.com manuals search engine

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of JVC HR-J645 in the language / languages: English as an attachment in your email.

The manual is 1,31 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

JVC HR-J645 Manual

Product: