559742

JVC HR-J238E Manual

29
Zoom out
Zoom in
Previous page
1/40
Next page
29
Storing Channels Manually
Store channels that were not stored during Auto Channel Set.
%
%
USING THE CONFIRMATION SCREEN
%
ACCESS CH. SET MODE
MENU
1
Press and hold CH SET for more than 2 seconds. The
Language screen appears. Press OK. The Ch. Set Mode
menu appears.
SELECT MODE
2
Press PUSH JOG
%
fi
to select “MANUAL CH SET”,
then press OK. The Confirmation screen appears.
SELECT POSITION
3
Press PUSH JOG
%
fi
until an open position in
which you want to store a channel begins blinking,
then press OK. The Manual Ch. Set screen appears.
INPUT CHANNEL
4
The number "02" appears blinking beneath "CH".
Press the NUMBER keys to input the channel number
you want to store.
● Although "CH" is set to "02", when the Manual Ch.
Set screen appears, to store channel 02, you must
select "02" using the NUMBER keys.
● For fine tuning adjustment, press PUSH JOG until
the item beneath "CH" begins blinking, then press
PUSH JOG
%
fi
. While tuning, “F+” or “F–” appears.
● If necessary, to change the band between CH(regular)
and CC(cable), press PUSH JOG until CH or CC is
blinking, then press PUSH JOG %fi to select the
band.
● When storing a channel that sends scrambled
broadcasts, press PUSH JOG until "DECODER"
blinks, then press PUSH JOG
%
fi
to set "DECODER"
to "ON" ("OFF" is the default setting).
ENTER NEW CHANNEL
INFORMATION
5
Press OK or STORE, and the Confirmation screen
appears.
● Repeat steps 3 through 5 as necessary.
CLOSE CONFIRMATION
SCREEN
6
Press CH SET.
● To input the station name, see page 30.
● To change positions, see "Change Station Channel
Position" (at right).
When Receiving A Scrambled Broadcast
Make sure that the AV2 SELECT switch is set to "DECODER"
(੬ pg. 4).
1– Perform steps 1 and 2 above.
2– Press PUSH JOG
%
fi
to select the position of the
channel broadcasting the scrambled programmes, then
press OK three times.
%
%
fi
3– Press PUSH JOG until "DECODER" begins blinking, and
set it to "ON" by pressing PUSH JOG
%
fi
.
4– Press OK to access the Confirmation screen.
● Repeat steps 2 – 4 for each additional channel.
5– Press CH SET.
Change Station Channel
Position
SELECT ITEM
1
Press PUSH JOG
%
fi
until the item you want to
move begins blinking. Then press OK and the station
name (ID) and its channel (CH) number begin blinking.
SELECT NEW POSITION
2
Press PUSH JOG
%
fi
to move the station to the new
channel position, then press OK.
Example: If you moved the station in position 3 to
position 7, the stations originally in positions 4–7 each
move up one space.
● Repeat steps 1 and 2 as necessary.
CLOSE CONFIRMATION
SCREEN
3
Press CH SET.
%
%
%
%
Perform steps 1 and 2 of the previous procedure to access
the Confirmation screen before continuing.
SELECT ITEM
1
Press PUSH JOG
%
fi
until the item you want to
delete begins blinking.
DELETE CHANNEL
2
Press CANCEL.
● The item directly beneath the cancelled one moves
up one line.
● Repeat steps 1 and 2 as necessary.
CLOSE CONFIRMATION
SCREEN
3
Press CH SET.
%
%
Delete A Channel
%
%
fi
… 29 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC HR-J238E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC HR-J238E in the language / languages: English as an attachment in your email.

The manual is 1,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info