485208
27
Zoom out
Zoom in
Previous page
1/52
Next page
EN 27
ENTER PROGRAMME DATE
5
Press DATE +/–. (The current date appears on screen.
The date you enter appears in its place.)
If you are using the Illumi-Guide feature, the following
buttons remain lit: START +/–, STOP +/–, DATE +/–,
TV PROG. +/– and MENU.
ENTER CHANNEL POSITION
6
Press TV PROG. +/–.
IMPORTANT
Be sure to confirm the setting of PDC/VPS recording.
If " ON" is displayed on the screen or " " is lit
on the display panel, PDC/VPS is set to ON.
If " OFF" is displayed on the screen or " " is
not lit on the display panel, PDC/VPS is set to OFF.
To change the setting, press : PDC/VPS
(NUMBER key "7").
"PDC/VPS Recording" on page 29.
If you are using the Illumi-Guide feature, OK blinks
when the following buttons are lit: START +/–, STOP
+/–, DATE +/–, TV PROG. +/– and MENU.
RETURN TO NORMAL SCREEN
7
After confirming all information is correct, press OK
and the normal screen appears.
Repeat steps 17 for each additional programme.
ENGAGE RECORDER’S TIMER
MODE
8
Press TIMER. The recorder turns off automatically.
To Timer-Record Weekly Or Daily Serials . . .
. . . anytime during steps 2 through 7, press WEEKLY (NUMBER
key “9”) for weekly serials or DAILY (NUMBER key “8”) for
daily serials (Monday–Friday). Either "WEEKLY" or "DAILY"
appears on the screen. Pressing the button again makes the
corresponding indication disappear.
5
/
8
¡
1
q
6
12
45
3
6
8
0
7
9
2
4
1
3
DAILY
TV PROG.
OK
WEEKLY
TIMER
NUMBER
:PDC/VPS
– P1 –
START STOP
21:00 = 22:00
ON
DATE TV PROG
25.12 1
ARD 1
[+/–] =
[MENU] : EXIT
NOTES:
To timer-record a satellite broadcast through a satellite tuner
connected to the AV2 IN/DECODER connector on the back of
the recorder, in step 6 above, set "TV PROG" to "AUX2" by
pressing TV PROG. +/–. Before the selected programme
begins, select the appropriate channel on the satellite tuner,
then set the tuner's timer. If your satellite tuner doesn't have a
timer, leave the unit's power switched on.
You can programme this recorder to timer-record as many as
8 programmes. If you try to programme the recorder to record
a ninth, "PROGRAM FULL" appears on screen and "FULL"
appears on the front display panel. To record the extra
programme, you must first cancel any unnecessary
programmes (
pg. 28).
TIMER
DATE+/–
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC HR-E249E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC HR-E249E in the language / languages: English as an attachment in your email.

The manual is 1,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info