136123
49
Zoom out
Zoom in
Previous page
1/84
Next page
49
NOTES:
Once the Insert Editing starts, you can not use the other deck.
All necessary cables can be obtained from your dealer.
Insert Editing cannot be performed on a VHS/S-VHS cassette
that has had its record safety tab removed, or on a Mini DV
cassette that has had its erase protection switch set to "SAVE".
When Insert Editing is performed on a tape that has been
recorded on another video recorder, the inserted portion may
appear distorted.
In Insert Editing, the recording speed (SP/LP) is determined by
the previous recording to be replaced. If the previous
recording's speed changes within a single edit, the inserted
picture will be distorted at the switching point. (VHS deck
only)
A small portion of the recording which precedes an insert edit
may be erased.
Insert Editing is also possible using the rear panel AV1 (L-1)
IN/OUT or AV2 (L-2) IN/DECODER connector. When using
these connectors, make sure to select the correct input mode in
step 3.
Insert Editing is not possible using the DV IN/OUT connector.
RESET THE COUNTER
(VHS DECK ONLY)
5
Press 0000 to change the counter display to "0:00:00".
LOCATE START POINT
6
Determine the edit-in point (the beginning of the
segment to be replaced) using the SHUTTLE ring or the
JOG dial or pressing
@ #
and PAUSE.
Be sure to engage the Still mode at the edit-in point.
ENGAGE INSERT EDITING
7
Press INSERT.
Your recorder enters the Insert-Pause mode. (" ", " "
and " " light up on the front display panel.)
The TV screen changes from the still picture to the
input source you are going to record.
START EDITING
8
Load the source cassette and play back the segment
that is to be inserted. When you reach the start of the
section of the source tape that you wish to insert, press
PLAY to start the tape in your recorder; Insert Editing
begins at this point.
" " and " " are displayed on the front display panel.
END INSERT EDITING
9
VHS deck
At counter "0:00:00", Insert Editing will stop automati-
cally while the tape continues running in the Play
mode. If you wish to stop Insert Editing before the
specified edit-out point, press 0000.
DV deck
Press STOP to stop the tape in the DV deck.
FOR AV INSERT EDITING (VHS DECK ONLY)
If you want to replace the picture, Hi-Fi audio soundtrack and
normal audio soundtrack all at the same time...
...
In step 7 above, after you press INSERT, press A. DUB also.
(" " and " " blink and " " lights up on the front display
panel.)
PLAY
STOP
PAUSE
A. DUB
123
456
789
1
2
1
2
3
0
3
4
4
PAUSE
PLAY
STOP
0000
INSERT
SHUTTLE
JOG
49


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC hr dvs 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC hr dvs 2 in the language / languages: English as an attachment in your email.

The manual is 2,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info