136123
42
Zoom out
Zoom in
Previous page
1/84
Next page
42
ADVANCED OPERATIONS (cont.)
Edit From
A Camcorder
You can use a camcorder as the source player and your video
recorder as the recorder.
You can perform digital dubbing if you connect a device such
as a camcorder which has a DV output/input connector.
Because the signals are digital, there is no loss of video or audio
quality as a result of editing.
MAKE CONNECTIONS
1
A
If the camcorder has no S-VIDEO output connector...
... connect the camcorders AUDIO/VIDEO OUT
connectors to the recorders front panel AUDIO/
VIDEO input connectors.
B
If the camcorder has an S-VIDEO output connector...
... connect the camcorders S-VIDEO OUT and
AUDIO OUT connectors to the recorders front
panel S-VIDEO and AUDIO input connectors.
A C
If the camcorder has a DV OUT/IN connector...
... connect the camcorders DV OUT/IN connector
to the recorders DV IN/OUT connector.
When using a monaural camcorder, connect its
AUDIO OUT connector to the AUDIO L input
connector on your recorder.
When a Master Edit Control-equipped JVC camcorder
is used, the camcorder is capable of controlling the
recorder. Refer to the camcorders instruction manual
for operating procedure.
SELECT RECORDING DECK
2
Press VHS or DV.
SET RECORDER’S INPUT
MODE
3
Press PR on the recorder to select "F-1".
When using the VHS deck as the recording deck, set
"VHS F-1 INPUT" to "VIDEO" for the AUDIO/VIDEO
input connectors, or "S-VIDEO" for the AUDIO/
S-VIDEO input connectors, depending on the
connectors being used ( pg. 51).
SET EDIT MODE
(VHS DECK ONLY)
4
See "Picture Control" on page 37.
START CAMCORDER
5
Engage its Play mode.
START RECORDER
6
Engage its Record mode.
NOTES:
All necessary cables can be obtained from your dealer.
You can also use another video recorder as the player instead
of a camcorder.
When you select EDIT to dub tapes in step 4, be sure to select
AUTO (or NORM when B.E.S.T. is set to OFF) after you finish
dubbing the tapes.
When you are editing through the DV IN/OUT connector, the
recorder will stop if the player begins playing a blank portion
of tape or the signal is interrupted.
To use the DV deck as the recording deck with connection
A or B
In step 3, after selecting "F-1"
,
press
and then press DV to
select the DV deck. Then follow the procedures from step 5.
To use the VHS deck as the recording deck with connection
C
In step 3, after selecting "F-1"
,
press
and then press VHS to
select the VHS deck. Then follow the procedures from step 4.
VHS
DV
PR
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC hr dvs 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC hr dvs 2 in the language / languages: English as an attachment in your email.

The manual is 2,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info