136123
16
Zoom out
Zoom in
Previous page
1/84
Next page
16
BASIC OPERATIONS (cont.)
Time Code (DV Deck)
During recording,
a time code is
recorded on the
tape. This time
code is used to
confirm the
position on the
tape when playing
or editing a tape.
To perform
Random Assemble
Editing ( pg. 40),
time code is
necessary.
NOTES:
The presence of a blank (unrecorded) portion in the
middle of a tape can result in misoperation.
A "blank portion" of a tape is a section where nothing is
recorded on the tape. If you start making a recording in a
blank portion of a tape, the time codes will start from
"0:00:00" again. If identical time codes are recorded in two
different places on a tape, Random Assemble Editing and
other similar functions might not operate properly.
In the following circumstances, you should play the tape
and confirm where a scene ends, and then begin recording
from there:
When starting to record in the middle of a tape on which
a recording has already been made.
When you have made a recording on a tape, then played
that recording back in order to check it, and now wish to
continue recording.
When you have lost power or the batteries have died
while you were recording with a camcorder.
Tape Position Indicator
(VHS Deck)
The tape position indicator
appears on screen when,
from the Stop mode, you
press FF, REW or perform an
Index Search. The position
of "5" in relation to "0"
(beginning) or "+" (end)
shows you where you are
on the tape.
"O.S.D." ( pg. 55) must
be set to "ON", or the
indicator will not appear.
NOTE:
Depending on the type of tape used, there may be times
when the indication is not correct.
3
1:23:45
REMAIN 2:35
0
+++
Beginning End
123
456
789
1
2
1
2
3
0
3
4
4
REW
Clean the video heads using a dry cleaning
cassette (TCL-2U for the VHS deck/
M-DV12CLAU for the DV deck) when:
"USE CLEANING CASSETTE" appears on the screen (only
with "O.S.D." set to "ON" ( pg. 55)).
OR
VHS Deck
Rough, poor picture appears while a tape is played back.
The picture is unclear or no picture appears.
DV Deck
No picture during playback.
Blocks of noise appear during playback.
FF
Hours
Seconds
Minutes
0 : 00 : 00
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC hr dvs 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC hr dvs 2 in the language / languages: English as an attachment in your email.

The manual is 2,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info