57107
20
Zoom out
Zoom in
Previous page
1/37
Next page
1-20 (No.YA092B)
3.2 MEMORY IC REPLACEMENT
3.2.1 MEMORY IC
This memory IC stores data for proper operation of the video and
Drive circuits.
When replacing, be sure to use an IC containing this (initial
value) data.
3.2.2 MEMORY IC REPLACEMENT PROCEDURE
1. Power off
Switch off the power and disconnect the power cord from
the wall outlet.
2. Replace the memory IC
Initial value must be entered into the new IC.
3. Power on
Connect the power cord to the wall outlet and switch on the
power.
4. SERVICE MENU setting
Before entering the SERVICE MENU, confirm that the setting
of TV/CATV SW of the REMOTE CONTROL UNIT is at the
"TV" side and the setting of VCR/DVD SW of the REMOTE
CONTROL UNIT is at the "VCR" side. If the switches have not
been properly set, you cannot enter the SERVICE MENU.
1) Press [SLEEP TIMER] key and while the indication of
SLEEP TIMER 0 MIN is being displayed, press
[DISPLAY] key and [VIDEO STATUS] key (Fig.2)
simultaneously.
2) The SERVICE MENU screen of Fig.1 is displayed.
3) Verify what to set in the SERVICE MENU, and set
whatever is necessary (Fig.1).
Refer to the SERVICE ADJUSTMENT for setting.
4) Press the [BACK] key to return the SERVICE MENU.
5. Receive channel setting
Refer to the OPERATING INSTRUCTIONS (USER'S
GUIDE) and set the receive channels (Channels Preset) as
described.
6. User settings
Check the user setting items according to after page.
Where these do not agree, refer to the OPERATING
INSTRUCTIONS (USER'S GUIDE) and set the items as
described.
Fig.1
3.2.3 SERVICE MENU SETTING ITEMS
Fig.2
Setting item Item No. Remark
1.ADJUST
VIDEO SYSTEM S001~S039
Adjust
AUDIO SYSTEM T001~T010
PANEL CONTROL SYSTEM P001~P010
Do not adjust
(Fixed value)
DRIVE SYSTEM D001~D187
SYSTEM SETTING Z001~Z010
SERVICE MENU SCREEN
SERVICE MENU
1. ADJUST
2. SELF-CHECK
3. I2C STOP
INPUT 1
INDEX
FREEZE
SWAP SELECT
RETURN+
INPUT 2
INPUT 3
INPUT 4
DIGITAL-IN
THEATER
PRO
VIDEO
STATUS
SLEEP TIMER
DISPLAY
LIGHT
TV
CATV VCR DVD
MUTING
MENU
BACK
C.C.
RM-C15G
REW
VCR CHANNEL
PREV NEXT
VCR / DVD
POWER
TV / VCR
FFPLAY
REC PAUSE
OPEN CLOSE
STILL PAUSE
STOP
CH
CH
VOL VOL
OK
MULTI SCREEN
TWIN
V1
V2
V3
V4
D-IN
123
456
789
0
TUNE
TV
POWER
ASPECT
C.C.
+
SOUND
VIDEO STATUS
SERVICE MENU
ITEM SELECT KEY
DISPLAY
(Enter the SERVICE MENU)
BACK
(Return key)
SLEEP TIMER
(Skip / Enter the SERVICE MENU)
Number key
MUTING
(Memory key)
TV / CATV
(Set toTV)
POWER
VCR/DVD
(Set to VCR)
MENU
(Come out SERVICE MENU key )
FUNCTION
(Value setting key)
FUNCTION
(SERVICE ITEM select key)
&
1 3
9
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC HD-61Z585 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC HD-61Z585 in the language / languages: English as an attachment in your email.

The manual is 1,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info