57107
14
Zoom out
Zoom in
Previous page
1/37
Next page
1-14 (No.YA092B)
<BODY SIDE>
3.1.15 BODY COVER
(1) Remove 9 screws [ A ] (BODY).
(2) Remove 6 screws [ B ] (AV TERMINAL BOARD).
(3) Take out the BODY COVER.
NOTE :
Do not leave the BODY COVER removed for long time to
prevent soiling from dust.
3.1.16 BODY BRACKET
Take out the BODY COVER.
(1) Remove 4 screws [ C ].
(2) Take out the BODY BRACKET.
3.1.17 MAIN UNIT
Take out the BODY COVER.
Take out the BODY BRACKET.
(1) Remove 2 screws [ D ].
(2) Take out the TOP SHADE BRACKET.
(3) Take out the connector [FJ:12pin], [SW:4pin], [SPR:2pin
(black)], [SPL:2pin(white)], [FL:7pin].
(4) Remove 2 screws [ E ] from rear side.
(5) Pull out the MAIN UNIT rear side.
CAUTION
Except for confirmation of projection images on the
screen and audio output through the speakers, the
removed MAIN UNIT is still workable in the same state as
if it is still built in the TV set. Therefore, the MAIN UNIT can
be removed, if necessary, for board diagnosis, electric
testing, etc. apart from confirmation of screen images and
audio output.
Do not leave the MAIN UNIT removed for long time to
prevent soiling from dust.
Because of the large size, at least 2 persons are
recommended for removal and reassemble.
When carrying the MAIN UNIT, use care not to drop, shock
or shake it.
Do not stain or damage the projection lens.
Do not look directly at the light during service.
Do not touch the lamp directly as it presents a burn
hazard.
NOTE :
• When not performing repair work, attach the cap on the
lens to preventing dust from covering.
When mounting to the set, make sure the front of the lens
is in contact with the cushion on the set (body) side.
Make sure that FRONT LED PWB connector is completely
connect to the RECEIVER PWB connector (CN10FL).
When wire clamps are removed during work, use care to
restore them precisely to their original positions.
Performance can be affected if these are not returned to the
original positions.
-----------------------------
-------------------------
--------------------------------------
-----------------------------------
----------------------------------
---------------------------------
------------------------------
----------------------------
------------------------------
---------------------------------
-------------------------------
-----------------------------------
------------------------------
--------
----------------------------
-------------------
-----------------------------------
-------------------------
-----------------------------------
Before starting the work, be sure to read the following
written instructions on the printed CAUTION on the AV
TERMINAL BOARD.
AV TERMINAL BOARD
CAUTION :
FRONT
BODY
AV TERMINAL BOARD
BACK COVER
MAIN UNIT
TOP SHADE
BRACKET
BODY
BRACKET
BODY
COVER
E
D
B
A
C
(x2)
(x2)
(x6)
(x9)
(BODY)
AV TERMINAL
BOARD
(x4)
BODY SIDE VIEW
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC HD-61Z585 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC HD-61Z585 in the language / languages: English as an attachment in your email.

The manual is 1,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info