57101
32
Zoom out
Zoom in
Previous page
1/37
Next page
1-32 (No.YA092B)
Item
Measuring
instrument
Test point Adjustment part Description
1125i
A-D OFFSET
adjustment
Signal
generator
Remote
control unit
[1. ADJUST]
S001:PREPARE
S013:HD CB OF
(1125i Cb offset)
S014:HD CR OF
(1125i Cr offset)
S030:R DRIVE
(Red drive)
S031:G DRIVE
(Green drive)
S032:B DRIVE
(Blue drive)
(1) Input a 1125i 30% all white pattern signal from
COMPONENT VIDEO INPUT terminal.
(2) Set VIDEO STATUS to [STANDARD].
(3) Set ASPECT to [FULL].
(4) Set COLOR TEMPERATURE to [LOW].
(5) Select [1.ADJUST] from the SERVICE MENU.
(6) Adjust < S030 > (Red drive), < S031 > (Green drive)
and < S032 > (Blue drive) to set the values [128].
(7) Adjust < S001 > (PREPARE) from 000 to 013,
it goes to [Cb offset] adjustment mode.
(8) Adjust < S013 > (1125i Cb offset) to minimize the
blue noise in the upper half of the screen.
(9) Adjust < S014 > (1125i Cr offset) to minimize the red
noise in the upper half of the screen.
(10) Press the [MUTING] key to memorized the set
value.
(11) Repeat from (8) to (10) then adjust the adjustment
screen lightest color.
(12) Adjust < S001 > (PREPARE) from 013 to 000,
it change to the normal mode.
SUB SCREEN
A-D OFFSET
adjustment
Signal
generator
Remote
control unit
[1. ADJUST]
S001:PREPARE
S016:RT CB OF
(Sub screen Cb offset)
S017:RT CR OF
(Sub screen Cr offset)
S030:R DRIVE
(Red drive)
S031:G DRIVE
(Green drive)
S032:B DRIVE
(Blue drive)
(1) Set VIDEO STATUS to [STANDARD].
(2) Set ASPECT to [FULL].
(3) Set COLOR TEMPERATURE to [LOW].
(4) Set MULTI SCREEN to [TWIN].
(5) Set the LEFT screen to VIDEO-1 mode (No signal).
(6) Receive a NTSC 30% all white signal on the RIGHT
screen from RF(TV).
(7) Select [1.ADJUST] from the SERVICE MENU.
(8) Adjust < S030 > (Red drive), < S031 > (Green drive)
and < S032 > (Blue drive) to set the values [128].
(9) Adjust < S001 > (PREPARE) from 000 to 016,
it goes to [Sub-screen Cb offset] adjust mode.
(10) Adjust < S016 > (Sub-screen Cb offset) to minimize
the blue noise in the upper half of the screen.
If you select < S016 >, the screen automatically turn
to adjust mode.
(11) Adjust < S017 > (Sub-screen Cr offset) to minimize
the red noise in the upper half of the screen.
(12) Press the [MUTING] key to memorized the set
value.
(13) Adjust < S001 > (PREPARE) from 016 to 000,
it change to the normal mode.
Minimize the red and blue noises
in the upper half of the screen.
(No color or lightest color)
Set the 0% black part to be brightest.Video no signal.
VIDEO-1
<No signal>
TV (RF)
<30% all white>
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC HD-52Z575 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC HD-52Z575 in the language / languages: English as an attachment in your email.

The manual is 1,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info