The LCD monitor of this unit is a touch panel which enables operations by
touching the screen with your finger.
The operation buttons, thumbnails, and menu items are displayed on the
screen according to each mode (recording/playback/setting).
0
There
are two ways to operate the touch screen, namely “tap” and “drag”.
The following are some examples.
A
Tap the button (icon) or thumbnail (file) on the screen to make a selection.
B Drag the thumbnails on the screen to search for the desired file.
.
0:01:230:12:34
Recording ScreenPlayback Screen
Index screen (thumbnail display)
4
0:01:230:12:34
Memo :
0
The
touch screen of this unit is pressure-sensitive. When the touch screen
does not respond smoothly, apply slightly more force to your fingertip.
0
Do not press or rub with excessive force.
0
Do not operate the touch screen using an object with a sharp tip.
0
Perform “TOUCH SCREEN ADJUST” if the reactive area of the screen is
misaligned with the touched area.
“Adjusting the Touch Screen” (A p. 12)
0
You cannot operate the touch screen under water. Lock the screen to
prevent operation errors.
“Shooting under Water” (A p. 34)
Locking the Screen (when Shooting Underwater)
Lock the screen before using this unit underwater to prevent operation errors
on the touch screen due to water pressure.
0
Once the screen is locked, operations on the touch screen except L are
disabled.
0
The START/STOP (recording) button and the zoom lever can be used
while the screen is locked.
0
You can set for both video and still image modes.
0
If “SCREEN LOCK” has been set, it will take a longer time for the unit to
power off after closing the LCD monitor.
o
Setting the “SCREEN LOCK”
A
Check that the unit is in the recording mode.
B
Tap “MENU”.
C
Tap “RECORD SETTING”.
D
Tap “SCREEN LOCK”.
0
The L button appears on the screen.
.
o
To cancel “SCREEN LOCK”
Tap the L
button.
Memo :
0
Once
“SCREEN LOCK” is set, only the L button on the touch screen can
be operated.
0
“SCREEN LOCK” cannot be set for the following cases:
- during recording
- when “TIME-LAPSE RECORDING” or “DATE/TIME RECORDING” has
been set
Getting Started
11
Adjusting the Touch Screen
Adjust the response position when the touch screen is touched.
1
Tap “MENU”.
.
REC
≪PLAY
MENU
2
Tap “SETUP”.
.
OFF
SETUP
TOP MENU
Wi-Fi
SETTING
RECORD
SETTINGS
CONNECTION
3
Tap “TOUCH SCREEN ADJUST”.
.
TOUCH SCREEN ADJUST
SETUP
0
The touch screen adjustment screen appears.
4
Tap “+”. (3 times in total)
.
1/3
PRESS THE + MARK
0
Keep tapping “+” as its position changes with every tap.
0
If areas other than the “+” mark are tapped, errors will occur. Make
sure to tap the “+” mark.
5
Tap “+” again to confirm the adjusted positions. (3 times in total)
.
1/3
PRESS + MARK AGAIN
CONFIRM THE ADJUSTMENT
0
Keep tapping “+” as its position changes with every tap.
6
Tap “OK”.
.
OK
COMPLETED
0
Setting ends and returns to the menu screen.
Caution :
0
Do not tap areas other than the “+” mark during touch screen adjustment
(steps 4 - 5). Doing so may cause the touch screen to malfunction.
Memo :
0
Adjust by lightly tapping with a corner of an SD card, etc.
0
Do not press with an object with a sharp tip or do not press hard.
Getting Started
12
Names of Buttons and Functions on the LCD Monitor
The following screens are displayed during A
video and B still image
modes.
Recording Screen (Video/Still Image)
.
MENU
REC
≪PLAY
8
1
A/B (Video/Still Image) Mode Button
0
Switches between A video
mode (50i/50p) and B still image mode.
2
Zoom Button
“Zooming” (A p. 27)
3
Still Image Recording Button
0
Records still images during video recording.
“Capturing Still Images During Video Recording” (A p. 24)
4
Playback Mode Button
0
Switches to the playback mode.
5
Recording Start/Stop Button
0
6: Video Recording Start Button
0
7: Video Recording Stop Button
6
Menu Button
“Operating the Menu” (A p. 144)
7
Display Button
Switches the display between full (m) and simple (n) with every tap of
the button.
0
Simple display: Some displays disappear automatically when the
screen is not operated.
0
Full display: Displays everything. The display button changes from n
to m.
0
When the power is turned off, the display setting will revert to simple
display (n).
8
Recording Mode Button
Switches the recording mode (P Intelligent Auto/H Manual).
Playback Screen (Video)
.
00:01:2300:12:34
0
When this unit is not operated for a certain period of time, the operation
buttons on the LCD monitor disappear automatically. Tap on the screen
to display the operation buttons again.
1
A/B (Video/Still Image) Mode Button
0
Switches between A video
mode (50i/50p) and B still image mode.
2
Video Scene Capture Button
0
Displayed when playback is paused.
0
Saves one scene of the video being played back as a still image.
3
Recording Mode Button
0
Switches to the recording mode.
4
Index Screen (Thumbnail Display) Button
0
Returns to the index screen (thumbnail display).
“Operation Buttons for Video Playback” (A p. 55)
5
Delete Button
“Deleting the Currently Displayed File” (A p. 70)
6
Playback Zoom Button
0
Enlarges the video image that is played back.
“During Video Playback” (A p. 55)
7
Menu Button
“Operating the Menu” (A p. 144)
8
Operation Buttons
“Operation Buttons for Video Playback” (A p. 55)
9
Display Button
Switches the display between full (m) and simple (n) with every tap of
the button.
0
Simple display: Some displays disappear automatically when the
screen is not operated.
0
Full display: Displays everything. The display button changes from n
to m.
0
When the power is turned off, the display setting will revert to simple
display (n).
Getting Started
13
Playback Screen (Still Image)
.
0
When this unit is not operated for a certain period of time, the operation
buttons on the LCD monitor disappear automatically. Tap on the screen
to display the operation buttons again.
1
A/B (Video/Still Image) Mode Button
0
Switches between A video
mode (50i/50p) and B still image mode.
2
Recording Mode Button
0
Switches to the recording mode.
3
Index Screen (Thumbnail Display) Button
0
Returns to the index screen (thumbnail display).
“Operation Buttons for Still Image Playback” (A p. 65)
4
Delete Button
“Deleting the Currently Displayed File” (A p. 70)
5
Playback Zoom Button
0
Enlarges the still image that is being played back.
“Playing Back Still Images” (A p. 66)
6
Menu Button
“Operating the Menu” (A p. 144)
7
Operation Buttons
“Operation Buttons for Still Image Playback” (A p. 65)
8
Display Button
Switches the display between full (m) and simple (n) with every tap of
the button.
0
Simple display: Some displays disappear automatically when the
screen is not operated.
0
Full display: Displays everything. The display button changes from n
to m.
0
When the power is turned off, the display setting will revert to simple
display (n).
Index Screen (Thumbnail Display) Display
.
35467
1
2
8
1
A/B (Video/Still Image) Mode Button
0
Switches between A video
mode (50i/50p) and B still image mode.
2
Page Forward/Back Button
“Operation Buttons for Video Playback” (A p. 55)
“Operation Buttons for Still Image Playback” (A p. 65)
3
Recording Mode Button
0
Switches to the recording mode.
4
Mark Playback button (video only)
0
Allows scenes that are marked to be played back easily.
“ MARKING PLAYBACK ” (A p. 59)
5
Delete Button
“Deleting Selected Files” (A p. 70)
“Deleting the Currently Displayed File” (A p. 70)
6
Playback Media Button
0
Switches between SD card and built-in memory.
7
Menu Button
“Operating the Menu” (A p. 144)
8
Date Button
“Operation Buttons for Video Playback” (A p. 55)
“Operation Buttons for Still Image Playback” (A p. 65)
Getting Started
14
Menu screen (recording mode)
.
OFF
SETUP
TOP MENU
Wi-Fi
SETTING
RECORD
SETTINGS
CONNECTION
1
2
45
7
6
3
1
SILENT Button
“Using the Silent Mode” (A p. 23)
2
INFO. Button
“Checking the Remaining Recording Time” (A p. 52
)
3
Wi-Fi Button
“Using Wi-Fi” (A p. 92)
4
SETUP Menu
“SETUP (video/still image)” (A p. 156)
5
CONNECTION SETTINGS Menu
“CONNECTION SETTINGS (video/still image)” (A p. 159)
6
RECORD SETTING Menu
“RECORD SETTING Menu (video)” (A p. 145)
“RECORD SETTING Menu (still image)” (A p. 150)
7
Close Button
Exit the menu.
Menu screen (playback mode)
.
OFF
TOP MENU
SETTING
PLAYBACK
EDIT
SETTINGS
CONNECTION
SETUP
1
2
3
6
7
45
1
SILENT Button
“Using the Silent Mode” (A p. 23)
2
INFO. Button (Displayed only after playback)
“Checking the Recording Date and Other Information” (A p. 57
)
3
PLAYBACK SETTING Menu
“PLAYBACK SETTING Menu (video)” (A p. 152)
“PLAYBACK SETTING Menu (still image)” (A p. 154)
4
SETUP Menu
“SETUP (video/still image)” (A p. 156)
5
CONNECTION SETTINGS Menu
“CONNECTION SETTINGS (video/still image)” (A p. 159)
6
EDIT Menu
“EDIT Menu (video)” (A p. 153)
“EDIT Menu (still image)” (A p. 155)
7
Close Button
Exit the menu.
Getting Started
15
Clock Setting
“SET DATE/TIME!” is displayed when you turn on the unit for the first time
or when the unit has not been used for a prolonged period.
Set the clock before recording.
1
Open the LCD monitor.
.
0
The unit turns on.
0
When the LCD monitor is closed, the unit turns off.
2
Tap “OK” when “SET DATE/TIME!” is displayed.
.
OK
SET DATE/TIME!
3
Set the date and time.
.
2018121000
AM
TIME
DATE
SAVE
DATE & TIME SETTING
24
0
When the day, month, year, hour, or minute item is tapped, “3” and
“2” will be displayed.
0
Tap 3 or 2 to adjust the year, month, day, hour, and minute.
4
After setting the date and time, tap “SAVE”.
5
Select the region where you live and tap “SAVE”.
.
GMT
SAVE
DATE & TIME/AREA
0
Time difference between the selected city and the GMT (Greenwich
Mean Time) is displayed.
0
Tap 0 or 1 to select the city name.
Memo :
0
The clock can be reset again later.
“Resetting the Clock” (A p. 16)
0
When
using this unit overseas, you can set it to the local time for recording.
“Setting the Clock to Local Time when Traveling” (A p. 19)
0
The clock is reset about one month after the battery is depleted. “SET
DATE/TIME!” is displayed the next time you turn on this unit. Set the clock
again after charging the battery.
Resetting the Clock
Set the clock with “DATE & TIME” from the menu.
1
Tap “MENU”.
.
REC
≪PLAY
MENU
2
Tap “SETUP”.
.
OFF
SETUP
TOP MENU
Wi-Fi
SETTING
RECORD
SETTINGS
CONNECTION
3
Tap “DATE & TIME”.
.
SETUP
DATE & TIME
0
Tap 3 or 2 to scroll the screen.
4
Tap “CLOCK SETTING”.
.
DATE & TIME SETTING
DATE & TIME
5
Set the date and time.
.
AM
2018121000
24
TIME
DATE
DATE & TIME SETTING
SET
0
When the day, month, year, hour, or minute item is tapped, “3” and
“2” will be displayed.
0
Tap 3 or 2 to adjust the year, month, day, hour, and minute.
6
After setting the date and time, tap “SET”.
Getting Started
16
7
Select the region where you live and tap “SAVE”.
.
GMT
SAVE
DATE & TIME/AREA
0
Time difference between the selected city and the GMT (Greenwich
Mean Time) is displayed.
0
Tap 0 or 1 to select the city name.
Changing the Display Language
The language on the display can be changed.
1
Tap “MENU”.
.
REC
≪PLAY
MENU
2
Tap “SETUP”.
.
OFF
SETUP
TOP MENU
Wi-Fi
SETTING
RECORD
SETTINGS
CONNECTION
3
Tap “LANGUAGE”.
.
SETUP
LANGUAGE
0
Tap 3 or 2 to scroll the screen.
4
Tap to the desired language.
.
LANGUAGE
ENGLISH
0
Tap 3 or 2 to scroll the screen.
Getting Started
17
Holding this Unit
When holding this unit, keep your elbows close to your sides to prevent
camera shake.
.
0
Hold
the LCD monitor with your left hand and adjust the angle accordingly.
Holding the LCD monitor with your left hand helps to stabilize the camera
for recording.
Caution :
0
The photographer should pay attention to the surroundings during
shooting,
making sure that he/she is in no danger of falling or collision with
another person or vehicle.
0
Be careful not to drop this unit during transportation.
0
Guardians should pay close attention when this unit is used by children.
Tripod Mounting
This unit can be mounted on a tripod (or monopod). This is useful for
preventing camera shake and recording from the fixed position.
.
0
To
prevent this unit from falling off, check the tripod mounting screw holes
and positioning holes on the unit carefully before mounting, and turn the
screws until they are fastened firmly.
Caution :
0
To prevent injuries or damages which may result if this unit falls off, read
the instruction manual of the tripod (or monopod) to be used and make
sure that it is securely attached.
0
In strong wind conditions and when placed at an unstable location, there
is a risk of the tripod toppling and falling.
0
Please check beforehand if the use of a tripod is allowed as it may be
prohibited depending on the shooting location.
Memo :
0
It is recommended to use a tripod or monopod when recording in
conditions
prone to camera shake (such as in dark places or when zoomed
to the telephoto end).
0
Set the image stabilizer to b (OFF) when using a tripod for recording.
“Reducing Camera Shake” (A p. 43)
Getting Started
18
Using this Unit Overseas
The shape of the power outlet varies according to countries and regions.
To charge the battery pack, you need a converter plug that matches the
shape of the outlet.
“Charging the Battery Pack Overseas” (A p. 19)
Change the date and time display to the local time by selecting your travel
destination in “AREA SETTING” of “DATE & TIME”.
“Setting the Clock to Local Time when Traveling” (A p. 19)
When
“ON” is selected in “DST SETTING” of “DATE & TIME”, the time is set
1 hour ahead.
“Setting Daylight Saving Time” (A p. 20)
Charging the Battery Pack Overseas
The shape of the power outlet varies according to countries and regions.
To charge the battery pack, you need a converter plug that matches the
shape of the outlet.
.
ABBFCO
Morocco
Mozambique
Republic of South
Africa
Tanzania
Zambia
Kenya
Guinea
Egypt
Algeria
Africa
Jordan
Kuwait
Iran
Israel
Middle East
Peru
Venezuela
Brazil
Puerto Rico
Bahamas
Panama
Haiti
Chile
Jamaica
Colombia
Argentina
Latin
Fiji
New Zealand
To n g a
Tahiti
Guam
Australia
Oceania
Romania
Portugal
Poland
Belgium
France
Finland
Hungary
Norway
Germany
Denmark
Spain
Sweden
Switzerland
Greece
Canary Islands
Netherlands
Austria
Italy
United Kingdom
Ireland
Iceland
Europe
Asia
Mexico
Japan
United States
North America
Canada
Malaysia
Macau Special
Administrative Region
Hong Kong Special
Administrative Region
Vietnam
Philippines
Bangladesh
Pakistan
Nepal
China
South Korea
Thailand
Sri Lanka
Singapore
Indonesia
India
Setting the Clock to Local Time when Traveling
Change the date and time display to the local time by selecting your travel
destination in “AREA SETTING” of “DATE & TIME”.
Restore the region settings after you returned from the trip.
1
Tap “MENU”.
.
REC
≪PLAY
MENU
2
Tap “SETUP”.
.
OFF
SETUP
TOP MENU
Wi-Fi
SETTING
RECORD
SETTINGS
CONNECTION
3
Tap “DATE & TIME”.
.
SETUP
DATE & TIME
0
Tap 3 or 2 to scroll the screen.
4
Tap “AREA SETTING”.
.
AREA SETTING
DATE & TIME
5
Select the area you are traveling to and tap “SAVE”.
.
GMT
SAVE
AREA SETTING
0
Time difference between the selected city and the GMT (Greenwich
Mean Time) is displayed.
0
Tap 0 or 1 to select the city name.
Memo :
0
Setting
“AREA SETTING” changes the clock time such that time difference
is accounted for.
After returning to your country, re-select the region that was set initially to
restore the original clock settings.
Getting Started
19
Setting Daylight Saving Time
When “ON” is selected in “DST SETTING” of “DATE & TIME”, the time is set
1 hour ahead.
1
Tap “MENU”.
.
REC
≪PLAY
MENU
2
Tap “SETUP”.
.
OFF
SETUP
TOP MENU
Wi-Fi
SETTING
RECORD
SETTINGS
CONNECTION
3
Tap “DATE & TIME”.
.
SETUP
DATE & TIME
0
Tap 3 or 2 to scroll the screen.
4
Tap “DST SETTING”.
.
DST SETTING
DATE & TIME
5
Tap “ON”.
.
OFFON
CURRENT SETTING: OFF
DAYLIGHT SAVING TIME (DST)
DST SETTING
Memo :
0
What is daylight saving time?
Daylight saving time is the system of setting the clock 1 hour ahead for a
fixed period in summer.
It is used mainly in the Western countries.
0
Restore the daylight saving time settings after you returned from the trip.
Optional Accessories
Product NameDescription
HDMI Mini Cable
0
VX-HD310
0
VX-HD315
0
Allows viewing in high picture quality when
connected to a TV.
0
Transmits video, audio, and control signals
between devices.
Memo :
0
The optional accessories above may not be supported in some regions.
0
For more information, refer to the catalog.
0
For details on the provided accessories, refer to “Verifying the
Accessories”.
“Verifying the Accessories” (A p. 4
)
Getting Started
20
Taking Videos in Auto Mode
With
Intelligent Auto recording, the camera automatically adjusts the settings
such as brightness and focus to suit the shooting conditions.
0
In case of specific shooting scenes such as person etc., its icon is
displayed on the screen.
0
Before recording an important scene, it is recommended to conduct a trial
recording.
1
Open the LCD monitor.
.
A
0
Check if the recording mode is A.
0
If the mode is B still image, tap B on the recording screen to display
the mode switching screen.
Tap A to switch the mode to video.
2
Check if the recording mode is P Intelligent Auto.
.
≪PLAY
0
If the mode is H Manual, tap H on the recording screen to display
the mode switching screen.
Tap P to switch the recording mode to Intelligent Auto.
.
intelligent AUTO
MANUAL
3
Press the START/STOP button to start recording.
.
0
Press again to stop.
0
Some displays disappear after approximately 3 seconds.
Use the n button to change the displays.
Indications for Video Recording
.
0:00:00 [2:04]
10:10
MENU
REC
≪PLAY
Display IconDescription
A
Video QualityDisplays the icon of the “VIDEO QUALITY”
setting selected in the recording menu when
“SYSTEM SELECT” is set to “60i”.
“ VIDEO QUALITY ” (A p. 147
)
B
TOUCH PRIORITY
AE/AF
Displays the setting of “TOUCH PRIORITY AE/
AF”.
By default, it is set to “FACE TRACKING”.
“Capturing Subjects Clearly (TOUCH
PRIORITY AE/AF)” (A p. 41)
C
TimeDisplays the current time.
“Clock Setting” (A p. 16)
D
RECORDING
EFFECT
Displays the corresponding icon when a
recording effect is specified.
C: GRAINY MONOCHROME
D: FOOD
B: BABY
“Recording with Effects (RECORDING
EFFECT)” (A p. 35)
E
Image StabilizerDisplays the image stabilizer setting.
“Reducing Camera Shake” (A p. 43
)
F
Recording MediaDisplays the icon of the media where videos
are recorded to.
The recording media can be changed.
“ REC MEDIA FOR VIDEO ” (A p. 157)
G
Battery IndicatorDisplays the approximate remaining battery
power during use.
“Checking the Remaining Recording Time”
(A p. 52
)
H
Recording ModeDisplays the current recording mode of P
(Intelligent Auto) or H (Manual).
Current shooting mode is displayed.
I
Setting Scenes of
Intelligent Auto
Displays scenes detected automatically in the
Intelligent Auto function. Multiple scenes may
be detected.
J
SEAMLESS
RECORDING
Displays the seamless recording icon when it
is set. q appears if seamless recording
cannot be performed.
“ SEAMLESS RECORDING ” (A p. 147)
K
Remaining
Recording Time
Displays the remaining time for video
recording.
“Checking the Remaining Recording Time”
(A p. 52
)
L
Scene Counter
(Recorded Time)
Displays the elapsed time of the video that is
currently being recorded.
Recording
21
o
Scenes of Intelligent Auto
Display IconDescription
g
Captures one’s skin beautifully.
V
Allows people to be captured naturally.
f
Record a group of people with the most suitable
settings.
S
Records while focusing on a near object.
a
Focuses at a far distance and captures a sharp
image with vivid colors.
Z
Records in dark places with minimal noise in the
overall image.
T
Allows night scenes to be captured accurately with
minimal noise in the overall image.
d
Prevents colors from fading even when recording
in a bright environment, such as snowfield and
beaches.
X
Prevents colors from fading when recording a
subject in a spotlight.
i
Reproduces the green color of trees vividly.
Y
Reproduces the colors of sunset naturally.
h
Adjusts settings so that the subject does not
appear too dark due to backlight.
k
Records while emphasizing the brightness of the
colors.
U
Reproduces the natural colors of the outdoors
during the day.
c
Reproduces the natural colors of the indoors in a
cold-color illumination.
b
Reproduces the natural colors of the indoors in a
warm-color illumination.
e
Selects the most suitable settings for handheld
shooting.
j
Selects the most suitable settings when a tripod is
used for shooting.
Memo :
0
Scenes can be detected according to the shooting conditions and
automatically adjusted in Intelligent Auto mode.
0
Multiple
scenes may be detected depending on the recording conditions.
0
Some functions may not work properly depending on the shooting
conditions.
Operation Buttons for Video Recording
.
Operation
Buttons
Description
A
Video/Still Image
Mode
A/B
Switches between video and still image
modes.
B
WT ZoomAllows the same functions as the zoom
lever to be performed.
Camera shake that often occurs when
using the zoom lever can be minimized.
“Zooming” (A p. 27)
C
Still Image
Recording A
Tap this button to record a still image during
video recording.
“Capturing Still Images During Video
Recording” (A p. 24
)
D
Playback ModeSwitches to the playback mode.
E/ FRecording Start
6
Record-Standby
7
Functions as the START/STOP button.
G
MENUDisplays the various menus of video
recording.
“Operating the Menu” (A p. 144)
H
Display Button nSwitches the display between full (m)
and
simple (n) with every tap of the button.
0
Simple display: Some displays
disappear automatically when the
screen is not operated.
0
Full display: Displays everything. The
display button changes from n to m.
0
When the power is turned off, the display
setting will revert to simple display (n).
I
Recording Mode
P/H
Switches between the P
Intelligent Auto
and H Manual recording mode.
Recording
22
Using the Silent Mode
When the Silent mode is used, the LCD monitor darkens and operation
sounds
will not be output. Use this mode to record quietly in dark places such
as during a performance.
0
T appears when “SILENT MODE” is set to “ON”.
0
To mute only the operating sound, set “OPERATION SOUND” in the menu
to “OFF” instead of using the silent mode.
“ OPERATION SOUND ” (A p. 157)
o
Operating procedure
A
Tap “MENU”.
0
The top menu appears.
B
Tap T.
.
OFF
SETUP
TOP MENU
Wi-Fi
SETTING
RECORD
SETTINGS
CONNECTION
C
Tap “ON”.
.
OFF
ON
SILENT MODE
Useful Settings for Recording
0
When “DATE/TIME RECORDING” is used, the date and time can be
recorded together with the video.
“Recording Videos with Date and Time” (A p. 50)
Caution :
0
Do not expose the lens to direct sunlight.
0
While this unit can be used with the LCD monitor reversed or the LCD
monitor closed with “LCD CLOSED RECORDING” activated, the
temperature of this unit rises more easily. Leave the LCD monitor open
when
using this unit for long periods of time, or in places exposed to direct
sunlight or high temperatures.
0
The power may turn off to protect the circuit if the temperature of this unit
rises too much.
0
If the temperature of this unit rises during recording, 7 changes color
to yellow as a notification.
0
This unit is a microcomputer-controlled device. Electrostatic discharge,
external noise and interference (from a TV, a radio, etc.) might prevent it
from functioning properly. In such a case, close the monitor screen to turn
off the power and remove the AC adapter, then press the Reset button to
reset this unit.
“Resetting this Unit” (A p. 6)
0
Disclaimer
- We shall not be held responsible for loss of recorded contents when
recording videos/audio or playback cannot be operated due to
malfunctions in this unit, provided parts, or SD card.
- Once deleted, recorded contents (data), including data loss due to
malfunctions in this unit, cannot be restored. Please be forewarned.
- JVC will not be responsible for any lost data.
Memo :
0
Check that the remaining recording time in the media is sufficient before
you start recording. “Checking the Remaining Recording Time”
(A p. 52)
If the remaining recording time is not sufficient, save the files on a PC or
disc before deleting the files from the unit. “Deleting Unwanted Files”
(A p. 70)
0
When there are many files in the media, it may take time for them to be
displayed on the playback screen. Wait for a while as the POWER/
ACCESS lamp blinks, indicating normal operation.
0
Recording stops automatically as it cannot be performed for 12 or more
consecutive hours according to specifications.
(It may take some time to resume recording.)
0
Up to 4GB per video file can be recorded. File recorded using long
recordings that exceeds 4GB is split and recorded into several video files.
0
Depending on the shooting conditions, the four corners of the screen may
appear dark, but this is not a malfunction. In this case, change the shooting
conditions by moving the zoom lever, etc.
Recording
23
Capturing Still Images During Video Recording
Still images can be captured by tapping the A
button while in the video mode
(standby or recording).
.
MENU
REC
≪PLAY
0
“PHOTO” lights up on the screen when a still image is being captured.
.
0
The still images captured during video recording are saved to the
destination set in “REC MEDIA FOR IMAGE”.
Memo :
0
The size of the still image that is captured in the video mode is 1,920 x
1,080.
0
Operation is invalid under the following conditions:
- when menu is being displayed
- when remaining recording time or battery power is being displayed
- when any functions in “TIME-LAPSE RECORDING”, “ANIMATION
EFFECT”, “RECORDING EFFECT”, “CLOSE-UP SUB-WINDOW” or
“DATE/TIME RECORDING” is set
- when the AV cable is connected to the AV connector
- when the HDMI cable is connected and a resolution other than 1080i is
output
Taking Still Images in Auto Mode
You can record without worrying about the setting details by using the P
Intelligent Auto mode.
1
Open the LCD monitor.
.
B
0
Check if the recording mode is B.
0
If the mode is A
video, tap A on the recording screen to display the
mode switching screen.
Tap B to switch the mode to still image.
2
Check if the recording mode is P Intelligent Auto.
.
MENU
MENU
≪PLAY
0
If the mode is H Manual, tap H on the recording screen to display
the mode switching screen.
Tap P to switch the recording mode to Intelligent Auto.
.
intelligent AUTO
MANUAL
3
Press the START/STOP button.
.
0
PHOTO lights up when a still image is being captured.
Memo :
0
Depending
on the subject and shooting conditions, recording may not be
performed properly even in the Intelligent Auto mode.
o
Start recording after adjusting the focus
A
Press and hold the A button on the touch screen until the focus is
adjusted.
.
Lights up in green when in focus
B
Remove your finger from the button to release the shutter.
Available only when “SHUTTER MODE” is set to “RECORD ONE SHOT”.
Recording
24
Indications During Still Image Recording
.
[6630]
10:10
MENU
≪PLAY
0
Some displays disappear after approximately 3 seconds.
Use the n
button to change the displays.
Display IconDescription
A
Image SizeDisplays the icon of the image size.
0
The size of still images can be changed.
“ IMAGE SIZE ” (A p. 151
)
B
TOUCH PRIORITY
AE/AF
Displays the setting of “TOUCH PRIORITY AE/
AF”.
By default, it is set to “FACE TRACKING”.
“Capturing Subjects Clearly (TOUCH
PRIORITY AE/AF)” (A p. 41)
C
TimeDisplays the current time.
“Clock Setting” (A p. 16
)
D
RECORDING
EFFECT
Displays the corresponding icon when a
recording effect is specified.
C: GRAINY MONOCHROME
D: FOOD
B: BABY
“Recording with Effects (RECORDING
EFFECT)” (A p. 35)
E
Recording mediaDisplays the icon of the media where still
images are recorded to.
The recording media can be changed.
“ REC MEDIA FOR IMAGE ” (A p. 158)
F
Battery IndicatorDisplays the approximate remaining battery
power during use.
“Checking the Remaining Recording Time”
(A p. 52)
G
Recording ModeDisplays the current recording mode of P
(Intelligent Auto) or H (Manual).
H
Setting Scenes of
Intelligent Auto
Displays scenes detected automatically in the
Intelligent Auto function. Multiple scenes may
be detected.
I
Remaining Number
of Shots
Displays the remaining number of shots for still
image recording.
“Approximate Number of Still Images (Unit:
Number of Shots)” (A p. 53)
J
Recording in
Progress
“PHOTO” appears when a still image is being
captured.
K
FocusLights up in green when focused.
o
Scenes of Intelligent Auto
Display IconDescription
g
Captures one’s skin beautifully.
V
Allows people to be captured naturally.
f
Record a group of people with the most suitable
settings.
S
Records while focusing on a near object.
a
Focuses at a far distance and captures a sharp
image with vivid colors.
Z
Records in dark places with minimal noise in the
overall image.
T
Allows night scenes to be captured accurately with
minimal noise in the overall image.
d
Prevents colors from fading even when recording
in a bright environment, such as snowfield and
beaches.
X
Prevents colors from fading when recording a
subject in a spotlight.
i
Reproduces the green color of trees vividly.
Y
Reproduces the colors of sunset naturally.
h
Adjusts settings so that the subject does not
appear too dark due to backlight.
k
Records while emphasizing the brightness of the
colors.
U
Reproduces the natural colors of the outdoors
during the day.
c
Reproduces the natural colors of the indoors in a
cold-color illumination.
b
Reproduces the natural colors of the indoors in a
warm-color illumination.
e
Selects the most suitable settings for handheld
shooting.
j
Selects the most suitable settings when a tripod is
used for shooting.
Memo :
0
Scenes can be detected according to the shooting conditions and
automatically adjusted in Intelligent Auto mode.
0
Multiple
scenes may be detected depending on the recording conditions.
0
Some functions may not work properly depending on the shooting
conditions.
Recording
25
Operation Buttons for Still Image Recording
.
[6630]
MENU
≪PLAY
Operation
Buttons
Description
A
Video/Still Image
Mode
A/B
Switches between video and still image
modes.
B
WT ZoomAllows the same functions as the zoom
lever to be performed.
Camera shake that often occurs when
using the zoom lever can be minimized.
“Zooming” (A p. 27)
C
Still Image
Recording A
Allows you to take still images using the
touch panel. Pressing and holding the
button
allows you to adjust the focus before
shooting.
“Start recording after adjusting the focus”
(A p. 24)
D
Playback ModeSwitches to the playback mode.
E
MENUDisplays the various menus of still image
recording.
“Operating the Menu” (A p. 144
)
F
Display Button nSwitches the display between full (m)
and
simple (n) with every tap of the button.
0
Simple display: Some displays
disappear automatically when the
screen is not operated.
0
Full display: Displays everything. The
display button changes from n to m.
0
When the power is turned off, simple
display (n) will be set.
G
Recording Mode
P/H
Switches between the P
Intelligent Auto
and H Manual recording mode.
Using the Silent Mode
When the Silent mode is used, the LCD monitor darkens and operation
sounds
will not be output. Use this mode to record quietly in dark places such
as during a performance.
0
T appears when “SILENT MODE” is set to “ON”.
0
To mute only the operating sound, set “OPERATION SOUND” in the menu
to “OFF” instead of using the silent mode.
“ OPERATION SOUND ” (A p. 157)
o
Operating procedure
A
Tap “MENU”.
0
The top menu appears.
B
Tap T.
.
OFF
SETUP
TOP MENU
Wi-Fi
SETTING
RECORD
SETTINGS
CONNECTION
C
Tap “ON”.
.
OFF
ON
SILENT MODE
Caution :
0
Do not expose the lens to direct sunlight.
0
While this unit may be used with the LCD monitor reversed and closed,
the temperature rises more easily. Leave the LCD monitor open when
using this unit for long periods of time, or in places exposed to direct
sunlight or high temperatures.
0
The
power may turn off to protect the circuit if the temperature of this unit
rises too much.
0
Do not remove the AC adapter or SD card when the POWER/ACCESS
lamp is lighted. The recorded data may become unreadable.
0
This unit is a microcomputer-controlled device. Electrostatic discharge,
external noise and interference (from a TV, a radio, etc.) might prevent it
from functioning properly. In such a case, close the monitor screen to turn
off the power and remove the AC adapter, then press the Reset button to
reset this unit.
“Resetting this Unit” (A p. 6)
Memo :
0
Before recording an important scene, it is recommended to conduct a trial
recording.
0
Depending on the shooting conditions, the four corners of the screen may
appear dark, but this is not a malfunction. In this case, change the shooting
conditions by moving the zoom lever, etc.
Recording
26
Zooming
The angle of view can be adjusted using zoom.
0
Use the W end (wide angle end) to shoot a wider field of view.
0
Use the T end (telephoto end) to magnify the subject for shooting.
.
T
W
VOL.
+
T (Telephoto End)
W (Wide Angle End)
0
The following zoom options are available:
- Optical Zoom (1 - 40x)
- Digital Zoom (41 - 200x)
0
You can also use the zoom (WT) button on the touch screen to zoom.
0
Tap
the WT button, then press and hold the T (telephoto end) or W (wide
angle end) button.
.
MENU
MENU
≪PLAY
REC
Zoom Button (T/W)
Memo :
0
When digital zoom is used, the image becomes grainy as it is digitally
enlarged.
0
The zoom ratio range can be changed.
“ ZOOM ” (A p. 148
)
Zoom Memory
The zoom position can be stored by the Zoom Memory icon (WT) on the
touch screen.
o
Storing Method
1
Zoom to the position to reach to the desired position for storing.
.
T
W
VOL.
+
2
Tap “WT”.
.
MENU
MENU
≪PLAY
REC
3
Press and hold “M” (approx. 1 second).
.
MENU
MENU
REC
0
Store the zoom position.
o
Operating Detail
1
Tap “WT”.
.
MENU
MENU
≪PLAY
REC
2
Tap “M”.
.
MENU
MENU
REC
0
Zoom to the point that is stored in advance.
Memo :
0
If the setting of DIS, VIDEO QUALITY, SYSTEM SELECT or ZOOM is
changed, the zoom position stored will be erased.
Recording
27
Manual Recording
In situations where you are unable to recording properly using Intelligent
Auto recording, you can change the settings and record using manual
recording.
1
Open the LCD monitor.
.
A
0
Set the recording mode to either A video or B still image.
0
To
switch the mode between video and still image, tap A or B on the
recording screen to display the mode switching screen.
Tap A or B to switch the mode to video or still image respectively.
2
Select the Manual recording mode.
.
≪PLAY
0
If the mode is P Intelligent Auto, tap P on the recording screen
to display the mode switching screen.
Tap H to switch the recording mode to Manual.
.
intelligent AUTO
MANUAL
3
Tap “MENU”.
.
REC
≪PLAY
MENU
0
The top menu appears.
4
Tap “RECORD SETTING”.
.
OFF
SETUP
TOP MENU
Wi-Fi
SETTING
RECORD
SETTINGS
CONNECTION
5
Tap the item to set manually.
.
RECORD SETTING
0
For
details on the various manual settings, refer to “Manual Recording
Menu”.
Manual Recording Menu
The following items can be set.
NameDescription
FOCUS
0
Use manual focus if the subject is not
focused automatically.
“Adjusting Focus Manually (FOCUS)”
(A p. 29)
BRIGHTNESS
ADJUST
0
Overall brightness on the screen can be
adjusted.
0
Use this when recording in a dark or bright
location.
“Adjusting Brightness” (A p. 30)
BACKLIGHT COMP.
0
Corrects the image when the subject
appears dark due to backlight.
0
Use this when shooting against the light.
“Setting Backlight Compensation” (A p. 31)
WHITE BALANCE
0
Overall
color on the screen can be adjusted.
0
Use this when the color on the screen
appears differently from the actual color.
“Setting White Balance” (A p. 32)
TELE MACRO
0
Use
this to take close-up (macro) shots of the
subject.
“Taking Close-up Shots (TELE MACRO)”
(A p. 33)
Recording
28
Adjusting Focus Manually (FOCUS)
Adjust the focus manually when you are unable to focus clearly using
Intelligent Auto or when you want to lock the focus.
1
Select the Manual recording mode.
.
≪PLAY
0
If the mode is P Intelligent Auto, tap P on the recording screen
to display the mode switching screen.
Tap H to switch the recording mode to Manual.
.
intelligent AUTO
MANUAL
2
Tap “MENU”.
.
REC
≪PLAY
MENU
0
The top menu appears.
3
Tap “RECORD SETTING”.
.
OFF
SETUP
TOP MENU
Wi-Fi
SETTING
RECORD
SETTINGS
CONNECTION
4
Tap “FOCUS”.
.
RECORD SETTING
0
Tap L to exit the menu.
0
Tap J to return to the previous screen.
5
Tap “MANUAL”.
.
MANUAL
AUTO
FOCUS
6
Adjust the focus.
.
MENU
MENU
≪PLAY
REC
SET
0
Tap E to focus on a distant subject.
If E appears blinking, focus cannot be set any further.
0
Tap p to focus on a near subject.
If p appears blinking, focus cannot be set any nearer.
7
Tap “SET” to confirm.
.
MENU
MENU
REC
≪PLAY
0
When
focus is confirmed, the focusing frame disappears and E and
p are displayed.
Recording
29
Adjusting Brightness
You can adjust the brightness to your preferred level.
1
Select the Manual recording mode.
.
≪PLAY
0
If the mode is P Intelligent Auto, tap P on the recording screen
to display the mode switching screen.
Tap H to switch the recording mode to Manual.
.
intelligent AUTO
MANUAL
2
Tap “MENU”.
.
REC
≪PLAY
MENU
0
The top menu appears.
3
Tap “RECORD SETTING”.
.
OFF
SETUP
TOP MENU
Wi-Fi
SETTING
RECORD
SETTINGS
CONNECTION
4
Tap “BRIGHTNESS ADJUST”.
.
RECORD SETTING
0
Tap L to exit the menu.
0
Tap J to return to the previous screen.
5
Tap “MANUAL”.
.
MANUAL
AUTO
BRIGHTNESS ADJUST
6
Adjust the brightness value.
.
≪PLAY
REC
MENU
SET
0
Compensation range: -2.0 to +2.0
0
Tap 3 to increase the brightness.
0
Tap 2 to decrease the brightness.
7
Tap “SET” to confirm.
.
≪PLAY
REC
MENU
Memo :
0
Settings can be adjusted separately for videos and still images.
Recording
30
Setting Backlight Compensation
You can correct the image when the subject appears too dark due to
backlight.
1
Select the Manual recording mode.
.
≪PLAY
0
If the mode is P Intelligent Auto, tap P on the recording screen
to display the mode switching screen.
Tap H to switch the recording mode to Manual.
.
intelligent AUTO
MANUAL
2
Tap “MENU”.
.
REC
≪PLAY
MENU
0
The top menu appears.
3
Tap “RECORD SETTING”.
.
OFF
SETUP
TOP MENU
Wi-Fi
SETTING
RECORD
SETTINGS
CONNECTION
4
Tap “BACKLIGHT COMP.”.
.
RECORD SETTING
0
Tap L to exit the menu.
0
Tap J to return to the previous screen.
5
Tap “ON” or “ADVANCE”.
.
ON
OFF
BACKLIGHT COMP.
ADVANCE
0
“ADVANCE” is designed to perform more effective backlight
compensation. Choose this when the backlight compensation is not
adjusted appropriately by “ON”.
0
After setting, the l icon (Advance: Q) appears.
SettingDetails
OFFBacklight compensation is disabled.
ONBacklight compensation is enabled.
ADVANCEShould be selected for a better backlight
compensation effect.
Recording
31
Setting White Balance
You can set the color tone to suit the light source.
1
Select the Manual recording mode.
.
≪PLAY
0
If the mode is P Intelligent Auto, tap P on the recording screen
to display the mode switching screen.
Tap H to switch the recording mode to Manual.
.
intelligent AUTO
MANUAL
2
Tap “MENU”.
.
REC
≪PLAY
MENU
0
The top menu appears.
3
Tap “RECORD SETTING”.
.
OFF
SETUP
TOP MENU
Wi-Fi
SETTING
RECORD
SETTINGS
CONNECTION
4
Tap “WHITE BALANCE”.
.
RECORD SETTING
0
Tap L to exit the menu.
0
Tap J to return to the previous screen.
5
Select the white balance setting.
.
AUTO
SET
0
You
can either tap the icon, or select the item using the “0”“1” button
and tap “SET”.
0
The White Balance icon appears on the screen upon completing the
setting.
SettingDetails
n
AUTOAdjusts automatically to the natural colors.
l
MWBUse this when the problem of unnatural colors is
not resolved.
m
FINESet this when shooting outdoors on a sunny day.
p
CLOUDSet this when shooting on a cloudy day or inside a
shade.
o HALOGENSet this when shooting under illumination such as
a video light.
q MARINE:BLUESet this when shooting in deep waters (water
appears blue).
r
MARINE:GREEN
Set this when shooting in shallow waters (water
appears green).
Using MWB
1
Point the cursor to “MWB” using the “0”“1” button.
2
Hold a sheet of plain white paper in front of the lens so that the white
paper fills the screen, tap and hold the “SET” button.
3
o blinks, release your finger after the setting screen disappears.
0
You can also tap and hold the “MWB” icon to perform the setting.
Memo :
0
The setting will not change if “MWB” is being tapped too fast (less than 1
second).
Recording
32
Taking Close-up Shots (TELE MACRO)
You can take close-up shots of an object using the tele macro function even
when the unit is at the telephoto zoom setting.
.
*The image is only an impression.
1
Select the Manual recording mode.
.
≪PLAY
0
If the mode is P Intelligent Auto, tap P on the recording screen
to display the mode switching screen.
Tap H to switch the recording mode to Manual.
.
intelligent AUTO
MANUAL
2
Tap “MENU”.
.
REC
≪PLAY
MENU
0
The top menu appears.
3
Tap “RECORD SETTING”.
.
OFF
SETUP
TOP MENU
Wi-Fi
SETTING
RECORD
SETTINGS
CONNECTION
4
Tap 1.
.
RECORD SETTING
5
Tap “TELE MACRO”.
.
RECORD SETTING
0
Tap L to exit the menu.
0
Tap J to return to the previous screen.
6
Tap “ON”.
.
ON
OFF
TELE MACRO
0
After setting, the tele macro icon o
appears.
SettingDetails
OFFEnables close-up shots up to 1 m at the telephoto (T) end.
Enables close-up shots up to 5 cm at the wide angle (W) end.
ONEnables close-up shots up to 60 cm at the telephoto (T) end.
Enables close-up shots up to 5 cm at the wide angle (W) end.
Caution :
0
When you are not taking close-up shots, set “TELE MACRO” to “OFF”.
Otherwise, the image may be blur.
Recording
33
Shooting under Water
Perform the following settings to shoot underwater.
Setting the White Balance to Underwater Mode
Corrects the color when shooting underwater to record more natural images.
Select
from the following two settings depending on the color of the water at
the shooting location.
1
Select the Manual recording mode.
.
≪PLAY
0
If the mode is P Intelligent Auto, tap P on the recording screen
to display the mode switching screen.
Tap H to switch the recording mode to Manual.
.
intelligent AUTO
MANUAL
2
Tap “MENU”.
.
REC
≪PLAY
MENU
0
The top menu appears.
3
Tap “RECORD SETTING”.
.
OFF
SETUP
TOP MENU
Wi-Fi
SETTING
RECORD
SETTINGS
CONNECTION
4
Tap “WHITE BALANCE”.
.
RECORD SETTING
5
Tap q or r.
.
AUTO
SET
SettingDetails
q MARINE:BLUESet this when shooting in deep waters (water
appears blue).
r
MARINE:GREEN
Set this when shooting in shallow waters (water
appears green).
Memo :
0
You may not necessarily achieve the correction effect as expected.
0
It is recommended to conduct a trial recording in advance.
Locking the Screen
1
Tap “MENU”.
.
REC
≪PLAY
MENU
0
The top menu appears.
2
Tap “RECORD SETTING”.
.
OFF
SETUP
TOP MENU
Wi-Fi
SETTING
RECORD
SETTINGS
CONNECTION
3
Tap 1 to change the items displayed.
.
RECORD SETTING
Recording
34
4
Tap “SCREEN LOCK”.
0
The L button appears.
.
0:00:00 [2:04]
Memo :
0
If “SCREEN LOCK” has been set, it will take a longer time for the unit to
power
off after closing the LCD monitor. If you open the LCD monitor after
closing it, and the power is still turned on, you can continue to record.
o
To cancel “SCREEN LOCK”
Tap the L button.
.
0:00:00 [2:04]
Memo :
0
Once “SCREEN LOCK” is set, only the L button on the touch screen can
be operated.
0
The START/STOP (recording) button and the zoom lever can be used
while the screen is locked.
0
“SCREEN LOCK” cannot be set for the following cases:
- during recording
- when “TIME-LAPSE RECORDING” or “DATE/TIME RECORDING” is set
Caution :
0
Before using the camera underwater, read “Before Using Underwater or
under Low Temperature” (A p. 7) carefully. Improper usage resulting in
water submersion will damage the device and cause injury.
0
Ensure that the terminal cover is closed tightly before using underwater or
on the beach.
“Opening the Terminal Cover (SD Card Cover)” (A p. 5)
Recording with Effects (RECORDING
EFFECT)
You can add and record various effects to videos or still images.
Once
setting is done, you can easily record images that are suitable for each
image.
Type of EffectDescription of Effect
C
GRAINY
MONOCHROME
Captures film-like monochrome images by
increasing
the contrast of mid-level brightness and
emphasizing the rough grainy feel on the image.
“Recording Images Like an Old Black and White
Photo (GRAINY MONOCHROME)” (A p. 36)
D
FOOD
Captures food images such that the food looks
appetizing even under fluorescent lighting in
homes
by changing the colors to warm-colors and
deepening the colors.
“Recording Food Images (FOOD)” (A p. 37)
B
BABY
Captures a soft and gentle image by lightening the
skin tone while retaining the reddish hue,
enhancing the skin beautifying effect as well as
smoothing the appearance of the skin.
“Recording Images of a Baby (BABY)”
(A p. 38
)
Caution :
0
Depending
on the shooting environment and subject, you may not achieve
the shooting effect as intended.
Recording
35
Recording Images Like an Old Black and White Photo
(GRAINY MONOCHROME)
Captures film-like monochrome images by increasing the contrast of mid-
level brightness and emphasizing the rough grainy feel on the image.
1
Open the LCD monitor.
.
A
0
Set the recording mode to either A video or B still image.
0
To
switch the mode between video and still image, tap A or B on the
recording screen to display the mode switching screen.
Tap A or B to switch the mode to video or still image respectively.
2
Tap “MENU”.
.
REC
≪PLAY
MENU
0
The top menu appears.
3
Tap “RECORD SETTING”.
.
OFF
SETUP
TOP MENU
Wi-Fi
SETTING
RECORD
SETTINGS
CONNECTION
4
Tap “RECORDING EFFECT”.
.
RECORD SETTING
0
If the icon is not displayed on the screen, tap 1 to scroll the screen.
0
Tap L to exit the menu.
0
Tap J to return to the previous screen.
5
Tap “GRAINY MONOCHROME”.
.
RECORDING EFFECT
OFF
GRAINY
MONOCHROME
BABY
FOOD
0
Tap L to exit the menu.
0
Tap J to return to the previous screen.
6
Start recording.
0
To cancel the setting, repeat the procedure from the beginning and
tap “OFF” in Step 5.
Recording
36
Recording Food Images (FOOD)
Captures food images such that the food looks appetizing even under
fluorescent lighting in homes by changing the colors to warm-colors and
deepening the colors.
1
Open the LCD monitor.
.
A
0
Set the recording mode to either A video or B still image.
0
To
switch the mode between video and still image, tap A or B on the
recording screen to display the mode switching screen.
Tap A or B to switch the mode to video or still image respectively.
2
Tap “MENU”.
.
REC
≪PLAY
MENU
0
The top menu appears.
3
Tap “RECORD SETTING”.
.
OFF
SETUP
TOP MENU
Wi-Fi
SETTING
RECORD
SETTINGS
CONNECTION
4
Tap “RECORDING EFFECT”.
.
RECORD SETTING
0
If the icon is not displayed on the screen, tap 1 to scroll the screen.
0
Tap L to exit the menu.
0
Tap J to return to the previous screen.
5
Tap “FOOD”.
.
RECORDING EFFECT
OFF
GRAINY
MONOCHROME
BABY
FOOD
0
Tap L to exit the menu.
0
Tap J to return to the previous screen.
6
Start recording.
0
To cancel the setting, repeat the procedure from the beginning and
tap “OFF” in Step 5.
Recording
37
Recording Images of a Baby (BABY)
Captures a soft and gentle image by lightening the skin tone while retaining
the
reddish hue, enhancing the skin beautifying effect as well as smoothing
the appearance of the skin.
1
Open the LCD monitor.
.
A
0
Set the recording mode to either A video or B still image.
0
To
switch the mode between video and still image, tap A or B on the
recording screen to display the mode switching screen.
Tap A or B to switch the mode to video or still image respectively.
2
Tap “MENU”.
.
REC
≪PLAY
MENU
0
The top menu appears.
3
Tap “RECORD SETTING”.
.
OFF
SETUP
TOP MENU
Wi-Fi
SETTING
RECORD
SETTINGS
CONNECTION
4
Tap “RECORDING EFFECT”.
.
RECORD SETTING
0
If the icon is not displayed on the screen, tap 1 to scroll the screen.
0
Tap L to exit the menu.
0
Tap J to return to the previous screen.
5
Tap “BABY”.
.
RECORDING EFFECT
OFF
GRAINY
MONOCHROME
BABY
FOOD
0
Tap L to exit the menu.
0
Tap J to return to the previous screen.
6
Start recording.
0
To cancel the setting, repeat the procedure from the beginning and
tap “OFF” in Step 5.
Recording
38
Recording with Animation Effects
(ANIMATION EFFECT)
You can add animation effects to video recordings.
The
animation effects appear when smiles are detected or when the screen
is touched.
1
Open the LCD monitor.
.
A
0
Set the recording mode to either A video or B still image.
0
To
switch the mode between video and still image, tap A or B on the
recording screen to display the mode switching screen.
Tap A or B to switch the mode to video or still image respectively.
2
Tap “MENU”.
.
REC
≪PLAY
MENU
0
The top menu appears.
3
Tap “RECORD SETTING”.
.
OFF
SETUP
TOP MENU
Wi-Fi
SETTING
RECORD
SETTINGS
CONNECTION
4
Tap “ANIMATION EFFECT”.
.
RECORD SETTING
0
If the icon is not displayed on the screen, tap 1 to scroll the screen.
0
Tap L to exit the menu.
0
Tap J to return to the previous screen.
5
Select a desired effect and tap “SET”.
.
SET
0
Tap 0 or 1 to change the effect.
0
Press the START/STOP button the camera to start recording.
Press again to stop.
0
To select another effect again after tapping “SET”, tap J.
0
Tap L to exit “ANIMATION EFFECT”.
(To perform operations other than recording, tap L to cancel the
“ANIMATION EFFECT” first.)
Recording
39
During SettingAfter SettingNote
.
.
Animation (effect) appears when
smiles are detected.
.
.
Animation (effect) appears when
smiles are detected.
..
Animation (effect) appears when
smiles are detected.
.
.
Animation (effect) appears when the
screen is touched.
Recording
40
Capturing Subjects Clearly (TOUCH PRIORITY
AE/AF)
“TOUCH PRIORITY AE/AF” is a function that adjusts focus and brightness
based on a tapped position.
This function is available for both videos and still images.
1
Open the LCD monitor.
.
A
0
Set the recording mode to either A video or B still image.
0
To
switch the mode between video and still image, tap A or B on the
recording screen to display the mode switching screen.
Tap A or B to switch the mode to video or still image respectively.
2
Tap “MENU”.
.
REC
≪PLAY
MENU
0
The top menu appears.
3
Tap “RECORD SETTING”.
.
OFF
SETUP
TOP MENU
Wi-Fi
SETTING
RECORD
SETTINGS
CONNECTION
4
Tap “TOUCH PRIORITY AE/AF”.
.
RECORD SETTING
0
If the icon is not displayed on the screen, tap 1 to scroll the screen.
0
Tap L to exit the menu.
0
Tap J to return to the previous screen.
5
Tap the desired setting.
.
OFF
TOUCH PRIORITY AE/AF
TRACKING
COLOR
SELECT
AREA
TRACKING
FACE
.
AREA SELECT
COLOR TRACKING
FACE TRACKING
0
Focus and brightness will be adjusted automatically based on the
tapped position (face/color/area). A blue frame appears around the
selected
subject (face/color), while a white frame appears around the
selected area.
0
To reset, tap the desired position (face/color/area) again.
0
To cancel “FACE TRACKING” or “COLOR TRACKING”, tap the blue
frame.
0
To cancel “AREA SELECT”, tap the white frame.
SettingDetails
OFFDeactivates the function.
FACE
TRACKING
e
appears on the screen. Recording is performed while
tracking and automatically adjusting the tapped face
(subject) with appropriate focus and brightness. In
addition, a blue frame appears around the tapped face
(subject).
COLOR
TRACKING
f
appears on the screen. Recording is performed while
tracking and automatically adjusting the tapped color
(subject) with appropriate focus. In addition, a blue frame
appears around the tapped color (subject).
AREA
SELECT
g
appears on the screen. Recording is performed while
automatically adjusting the tapped area (fixed position)
with appropriate focus and brightness. In addition, a
white frame appears around the tapped area.
AREA SELECT in TOUCH PRIORITY AE/AF is only
available within the optical zoom range. (unavailable
when digital zoom is being used)
Recording
41
Memo :
0
When “TOUCH PRIORITY AE/AF” is set, “FOCUS” will be set to “AUTO”
automatically.
Tap the selected position (face/color/area) again to cancel the setting.
0
Tap on an unselected position (face/color/area) to reset.
0
If the camera loses track of a subject, tap the subject again.
0
Settings are canceled when zoom operation is performed. (“AREA
SELECT” only)
0
When “COLOR TRACKING” is set, the targeted subject (color) may
change if similar colors are detected. In this case, tap the subject again.
The targeted subject (color) may also be tracked back again if it appears
in the center of the screen within a specific time.
Caution :
0
Subjects near the sides of the LCD monitor may not respond or be
recognized when tapped. In this case, move the subject to the center and
tap again.
0
“FACE TRACKING” may not work properly depending on the shooting
conditions (distance, angle, brightness, etc.) and the subject (direction of
face, etc.). It is also particularly difficult to detect faces in backlight.
0
“COLOR TRACKING” may not function properly in the following cases:
- when recording subjects with no contrast
- when recording subjects that are moving at high speed
- when recording in a dark place
- when the surrounding brightness changes
0
“AREA SELECT” is not available while the digital zoom is in use.
0
When “FACE TRACKING” is set, the subject may be lost if the camera is
moved vertically or horizontally very fast.
Recording
42
Reducing Camera Shake
When the image stabilizer is set, camera shake during video recording can
be effectively reduced.
1
Tap “MENU”.
.
REC
≪PLAY
MENU
2
Tap “RECORD SETTING”.
.
OFF
SETUP
TOP MENU
Wi-Fi
SETTING
RECORD
SETTINGS
CONNECTION
3
Tap “OIS”.
.
RECORD SETTING
0
If the icon is not displayed on the screen, tap 1 to scroll the screen.
0
Tap L to exit the menu.
0
Tap J to return to the previous screen.
4
Tap the desired setting.
.
ON(ENH.AIS)
ON(AIS)
DIS
OFF
ON
SettingDetails
b
OFF
Deactivates image stabilizer.
a
ON
Reduces camera shake under normal
shooting conditions.
r
ON (AIS)
Reduces camera shake more effectively
when shooting bright scenes on the wide
angle end.
Only on the wide angle end (approx. 5x).
s (Enhanced AIS)
The area of correction in the enhanced AIS
mode is greater than that in the AIS mode.
Camera shake can be reduced more
effectively
even when recording is performed
by zooming from wide angle to telephoto.
Memo :
0
It is recommended to set the image stabilizer to “OFF” when shooting a
subject of little movement with the unit on a tripod.
0
Complete
stabilization may not be possible if camera shake is excessive.
0
This setting is effective for video recording only.
0
Using the image stabilizer will narrow the angle of view.
0
Dynamic zoom is not available in the enhanced AIS mode.
0
The resolution for the enhanced AIS mode is lower compared to the other
modes.
Recording
43
Recording at Intervals (TIME-LAPSE
RECORDING)
This function enables the changes of a scene that occur slowly over a long
period to be shown within a short time by taking frames of it at a certain
interval.
This is useful for making observations such as the opening of a flower bud.
1
Open the LCD monitor.
.
A
0
Check if the recording mode is A.
0
If
the mode is B still image, tap B on the recording screen to display
the mode switching screen.
Tap A to switch the mode to video.
2
Tap “MENU”.
.
REC
≪PLAY
MENU
0
The top menu appears.
3
Tap “RECORD SETTING”.
.
OFF
SETUP
TOP MENU
Wi-Fi
SETTING
RECORD
SETTINGS
CONNECTION
4
Tap “TIME-LAPSE RECORDING”.
.
RECORD SETTING
0
If the icon is not displayed on the screen, tap 1 to scroll the screen.
0
Tap L to exit the menu.
0
Tap J to return to the previous screen.
5
Tap to select a recording interval (1 to 80 seconds).
.
OFF
INTERVAL
20SEC
INTERVAL
5SEC
INTERVAL
1SEC
TIME-LAPSE RECORDING
0
If the icon is not displayed on the screen, tap 1 to scroll the screen.
0
The
greater the number of seconds, the longer the recording interval.
0
Tap L to exit the menu.
0
Tap J to return to the previous screen.
6
Start recording.
.
0
A frame is taken at intervals of the selected period.
0
When the recording interval is set to “20SEC INTERVAL” or higher,
this unit switches to the power-saving mode between recordings.
At the next point to record, the power-saving mode will be turned off
and recording will start automatically.
0
Settings of Time-Lapse recording are not saved when the power is
turned off.
Indications During Time-Lapse Recording
.
0:00:01 [5:56]
0:00:01 [5:56]
0:00:00:01
0:00:00:01
DisplayDescription
A
Recording intervalDisplays the recording interval that is set.
B
Recorded TimeDisplays the actual recorded time of the video.
Recorded time increases in units of frames.
C
Actual Elapsed
Time
Displays the actual elapsed time after
recording starts.
D
Remaining
Recording Time
Remaining time left to record with the currently
selected video quality.
Recording
44
Time-Lapse Setting
The greater the number of seconds, the longer the recording interval.
SettingDetails
OFFDeactivates the function.
1SEC INTERVALTakes a frame at 1-second intervals.
Recorded videos will be played back at 30 times
speed.
5SEC INTERVALTakes a frame at 5-second intervals.
Recorded videos will be played back at 150 times
speed.
20SEC INTERVALTakes a frame at 20-second intervals.
Recorded videos will be played back at 600 times
speed.
80SEC INTERVALTakes a frame at 80-second intervals.
Recorded
videos will be played back at 2 400 times
speed.
Caution :
0
During the time-lapse recording, video quality is set to XP mode.
0
Audio cannot be recorded during time-lapse recording.
0
When
recording is stopped with the recorded time less than “0:00:00:14”,
the video will not be saved.
0
Zooming, simultaneous still image recording, and image stabilizer are not
available in time-lapse recording.
0
Seamless recording is disabled in time-lapse recording.
0
When Time-Lapse recording is set, you cannot record still images.
Memo :
0
Settings of time-lapse recording are reset when the power is turned off.
To
start time-lapse recording again, it is necessary to make the selection
once more.
0
Recording stops automatically 99 hours after it is started.
0
Make use of a tripod and AC adapter for time-lapse recordings with long
intervals.
It is also recommended to fix the focus and white balance manually.
“Tripod Mounting” (A p. 18)
Recording
45
Recording with a Part of the Screen Enlarged
in Sub Screen (CLOSE-UP SUB-WINDOW)
Record
with a portion of the screen enlarged and displayed in a sub screen.
This allows you to record the surrounding and the expression of the subject
at the same time.
1
Open the LCD monitor.
.
A
0
Check if the recording mode is A.
0
If
the mode is B still image, tap B on the recording screen to display
the mode switching screen.
Tap A to switch the mode to video.
2
Tap “MENU”.
.
REC
≪PLAY
MENU
0
The top menu appears.
3
Tap “RECORD SETTING”.
.
OFF
SETUP
TOP MENU
Wi-Fi
SETTING
RECORD
SETTINGS
CONNECTION
4
Tap “CLOSE-UP SUB-WINDOW”.
.
RECORD SETTING
0
If the icon is not displayed on the screen, tap 1 to scroll the screen.
0
Tap L to exit the menu.
0
Tap J to return to the previous screen.
5
Select and tap on the position to be displayed in the sub screen.
.
0:00:01 [5:56]
0:00:01 [5:56]
0
Tap A to switch the position of sub screen between right and left.
0
When the position to be displayed in the sub screen and the position
of the sub screen overlaps, the sub screen will be positioned at the
center.
6
Start recording.
.
0
Press the START/STOP button again to stop recording.
0
Tap L to exit “CLOSE-UP SUB-WINDOW”.
(To perform operations other than recording, tap L to cancel the
“CLOSE-UP SUB-WINDOW” first.)
Caution :
0
The
sub screen is electronically enlarged from the normal screen display
so the image may appear grainy.
Recording
46
Using the Self-timer
You can record video or still image using the self-timer.
This is useful when taking a video or still image that includes the
photographer.
The 2-second self-timer is useful for preventing camera shake caused by
pressing the shutter button when taking a still image.
Memo :
0
When shooting a photo using the self-timer function, use of a tripod is
recommended.
“Tripod Mounting” (A p. 18
)
o
Using the Self-timer in Video Mode
1
Open the LCD monitor.
.
A
0
Check if the recording mode is A.
0
If
this unit is in the still image mode B, tap the D (video/still image)
button on the touch screen to display the mode switching screen.
Tap A to switch the mode to video.
2
Tap “MENU”.
.
REC
≪PLAY
MENU
0
The top menu appears.
3
Tap “RECORD SETTING”.
.
OFF
SETUP
TOP MENU
Wi-Fi
SETTING
RECORD
SETTINGS
CONNECTION
4
Tap “SELF-TIMER”.
.
RECORD SETTING
0
If the icon is not displayed on the screen, tap 1 to scroll the screen.
0
Tap L to exit the menu.
0
Tap J to return to the previous screen.
5
Tap “ON”.
.
ON
OFF
SELF-TIMER
6
Press the START/STOP button.
.
0
The countdown to recording appears and recording will start after 5
seconds.
0
To stop the self-timer, press the recording button again.
Recording
47
o
Using the Self-timer in Still Image Mode
1
Open the LCD monitor.
.
B
0
Check if the recording mode is B.
0
If the mode is A
video, tap A on the recording screen to display the
mode switching screen.
Tap B to switch the mode to still image.
2
Tap “MENU”.
.
MENU
MENU
≪PLAY
0
The top menu appears.
3
Tap “RECORD SETTING”.
.
OFF
SETUP
TOP MENU
Wi-Fi
SETTING
RECORD
SETTINGS
CONNECTION
4
Tap “SELF-TIMER”.
.
RECORD SETTING
0
If the icon is not displayed on the screen, tap 1 to scroll the screen.
0
Tap L to exit the menu.
0
Tap J to return to the previous screen.
5
Tap “2SEC” or “10SEC”.
.
2SEC
10SECOFF
SELF-TIMER
6
Take a still image.
0
A timer appears and countdown to shooting starts.
0
To stop the self-timer, press the START/STOP button again.
Memo :
0
The START/STOP button on this unit cannot be used to adjust the focus
in advance. To adjust the focus in advance, press and hold the A button
on the touch screen until the focus is adjusted.
“Start recording after adjusting the focus” (A p.
24)
0
While the countdown timer is displayed, the buttons cannot be used as
they are not displayed on the screen.
Recording
48
Recording at a Fixed Interval and Playing
Back Repeatedly
After
recording for a specified duration, this unit automatically plays back the
scene and then repeats the recording process and the playback process
over and over again. This can be used to check a sports form or dance form.
The recorded scene can also be deleted automatically depending on the
setting.
1
Open the LCD monitor.
.
A
0
Check if the recording mode is A.
0
If
the mode is B still image, tap B on the recording screen to display
the mode switching screen.
Tap A to switch the mode to video.
2
Tap “MENU”.
.
REC
≪PLAY
MENU
0
The top menu appears.
3
Tap “RECORD SETTING”.
.
OFF
SETUP
TOP MENU
Wi-Fi
SETTING
RECORD
SETTINGS
CONNECTION
4
Tap “SELF-CHECK REC/PLAY”.
.
RECORD SETTING
0
If the icon is not displayed on the screen, tap 1 to scroll the screen.
0
Tap L to exit the menu.
0
Tap J to return to the previous screen.
5
Tap “SET”.
.
SELF-CHECK REC/PLAY
5(&25',1*7,0(㸸6(&
$872'(/(7(㸸2))
START
SET
.
SET
RECORDING TIME
AUTO DELETE
RECORDING TIME10 to 40 seconds (Can be set in 5-second interval.)
AUTO DELETEOff: The recorded video is retained.
On: The recorded video is deleted.
0
Tap L to return to the previous screen.
0
This operation is not necessary if you do not intend to change the
current setting displayed.
6
Tap “START”.
0
There is a 5 second countdown before recording starts at the
beginning of the operation only.
.
SELF-CHECK REC/PLAY
STOP
0
When the recording starts, the color of the number changes and the
remaining number of seconds for recording is displayed.
.
SELF-CHECK REC/PLAY
STOP
0
When recording is complete, playback starts automatically.
.
SELF-CHECK REC/PLAY
STOP
0
When playback ends, the next recording starts automatically.
0
Tap “STOP” to exit “SELF-CHECK REC/PLAY”.
Memo :
0
The
START/STOP button cannot be used during the “SELF-CHECK REC/
PLAY” operation.
Recording
49
Recording Videos with Date and Time
You can record videos together with the date and time.
Set this when you want to save the file with date and time display.
(The date and time cannot be deleted after recording.)
1
Open the LCD monitor.
.
A
0
Check if the recording mode is A.
0
If
the mode is B still image, tap B on the recording screen to display
the mode switching screen.
Tap A to switch the mode to video.
2
Tap “MENU”.
.
REC
≪PLAY
MENU
0
The top menu appears.
3
Tap “RECORD SETTING”.
.
OFF
SETUP
TOP MENU
Wi-Fi
SETTING
RECORD
SETTINGS
CONNECTION
4
Tap “DATE/TIME RECORDING”.
.
RECORD SETTING
0
If the icon is not displayed on the screen, tap 1 to scroll the screen.
0
Tap L to exit the menu.
0
Tap J to return to the previous screen.
5
Select the type of clock with 0 or 1, and tap “SET”.
.
SET
0
When “SET” is tapped, the precaution for date/time recording
appears.
0
Tap L to exit the menu.
6
Tap the display position with your finger and drag your finger to adjust.
.
0
Move
the date and time display while touching it with your finger and
tracing it on a screen.
7
Press the START/STOP button to start recording.
.
.
0
Press the START/STOP button again to stop recording.
0
Tap J to return to the screen for selecting the types of clock.
0
Tap L to exit “DATE/TIME RECORDING”.
(To perform operations other than recording, tap L to cancel the
“DATE/TIME RECORDING” first.)
Caution :
0
The date and time cannot be deleted after recording.
Recording
50
Recording Videos with Time Counter
You can take a video with a stopwatch recorded. You can start, stop and
reset the stopwatch as with any stopwatch.
This can be used to record sports video.
(The recorded time counter cannot be deleted afterward.)
1
Open the LCD monitor.
.
A
0
Check if the recording mode is A.
0
If
the mode is B still image, tap B on the recording screen to display
the mode switching screen.
Tap A to switch the mode to video.
2
Tap “MENU”.
.
REC
≪PLAY
MENU
0
The top menu appears.
3
Tap “RECORD SETTING”.
.
OFF
SETUP
TOP MENU
Wi-Fi
SETTING
RECORD
SETTINGS
CONNECTION
4
Tap “TIME COUNTER RECORDING”.
.
RECORD SETTING
0
If the icon is not displayed on the screen, tap 1 to scroll the screen.
0
Tap L to exit the menu.
0
Tap J to return to the previous screen.
5
Tap the display position with your finger and drag your finger to adjust.
.
0
The position can be adjusted when the recording stops.
6
Press the START/STOP button to start recording.
.
.
0
Press the START/STOP button again to stop recording.
0
Tap L to exit “TIME COUNTER RECORDING” when the recording
stops.
(To
perform operations other than recording, tap L to exit the “TIME
COUNTER RECORDING” first.)
7
Tap “E START” on the screen to start the counter.
.
0
You can start the recording after the counter has been started.
0
You can freely stop, reset or resume the counter during recording.
A
ESTART/STOPStarts and stops the counter.
B
RESETSets the counter reading to 0:00:00.
Memo :
0
If “TIME COUNTER RECORDING” is exited while the counter is still
running,
the counter continues to count from where it left off the next time
“TIME COUNTER RECORDING” is operated.
0
If 24 hours have elapsed since the counter started running or if the clock
has been set, the counter reading automatically returns to “0:00:00” and
the counter stops running.
0
The recorded time counter cannot be deleted afterward.
Recording
51
Checking the Remaining Recording Time
Display the remaining battery power and the remaining recording time.
Memo :
0
The remaining battery power and the remaining recording time are
estimates.
0
The remaining recording time is displayed only during video mode.
0
The remaining recording time is displayed for the recording media that is
currently selected.
1
Open the LCD monitor.
.
≪PLAY
0
Check that the camera is set to the recording mode. If the camera is
in the playback mode, click 3 to switch to recording mode.
2
Tap “MENU”.
.
REC
≪PLAY
MENU
0
The top menu appears.
3
Tap C.
.
OFF
SETUP
TOP MENU
Wi-Fi
SETTING
RECORD
SETTINGS
CONNECTION
4
Display the remaining recording time.
.
REMAINING BATTERY
MAX RECORDING TIME
FREE
0
The
remaining recording time is displayed only in the video recording
mode.
0
The remaining recording time is displayed for the recording media
that is currently selected.
0
O is displayed instead of the remaining battery power when the AC
adapter is connected.
0
To exit the display, tap L.
Recording
52
Approximate Video Recording Time
Picture qualityBuilt-in memory
8GB
UXP35 m
XP50 m
EP3 h
50p30 m
Picture qualitySDHC/SDXC card
4GB8GB16GB32GB64GB128GB
UXP20 m40 m1 h 20 m2 h 40 m5 h 40 m11 h 30 m
XP30 m1 h1 h 50 m3 h 50 m8 h 10 m16 h 20 m
EP1 h 40 m3 h 30 m7 h14 h28 h 50 m57 h 50 m
50p15 m35 m1 h 10 m2 h 30 m5 h10 h 10 m
0
The recording time indicated above will change depending on the recording conditions.
0
“UXP”, “XP”, and “EP” can only be selected in the 50i mode (when “SYSTEM SELECT” is set to “50i”).
Approximate Number of Still Images (Unit: Number of Shots)
Image sizeBuilt-in memorySDHC/SDXC card
8GB4GB8GB16GB32GB64GB
3680x2760(10M)(4:3)11006001300250051009999
1920x1080(2M)(16:9)560031006400999999999999
1440x1080(1.5M)(4:3)740042008400999999999999
640x480(0.3M)(4:3)999999999999999999999999
0
Still images that are captured during video recording or video playback are saved at a size of 1920 x 1080.
Approximate Duration of Built-in Battery
Actual recording timeContinuous recording time
(Maximum Recording Time)
2 h 40 m4 h 50 m
0
The above are values when “MONITOR BRIGHTNESS” is set to “3” (standard) and “SYSTEM SELECT” is set to “50i”.
0
The actual recording time is the recording time when operations such as starting/stopping recording, turning on/off the unit or zooming is performed
repeatedly.
0
Recording time may differ depending on the shooting environment and usage.
0
When the recording time becomes extremely short even when the battery is fully charged, the battery needs to be replaced. For details on replacing the
built-in battery (subject to a fee), consult the nearest JVC service center.
Recording
53
Playing Back Videos
The
followings are the types of playback that can be performed by this unit.
ItemDescription
Normal
Playback
Plays back the recorded videos.
Mark Playback
(Mark playback/
game playback)
You can use the smartphone application to search the
marked scenes and the goal scenes in Game Score.
You can also extract and play back only the marked
scenes and the goal scenes.
To start, tap J on the playback screen.
“Using Smartphone Applications” (A p. 114)
DIGEST
PLAYBACK
From the recorded video, scenes are extracted
automatically, pieced together for a digest playback
within the specified length.
Start playback from “DIGEST PLAYBACK” in the
“PLAYBACK SETTING” menu.
PLAYBACK
OTHER FILE
Videos with defective management information can be
played back.
Start playback from “PLAYBACK OTHER FILE” in the
“PLAYBACK SETTING” menu.
Caution :
0
Make a backup of important recorded data.
It
is recommended to copy your important recorded data to a BD or other
recording media for storage.
0
This unit is a microcomputer-controlled device. Electrostatic discharge,
external noise and interference (from a TV, a radio, etc.) might prevent it
from functioning properly. In such a case, close the monitor screen to turn
off the power and remove the AC adapter, then press the Reset button to
reset this unit.
“Resetting this Unit” (A p. 6)
0
When there are many files in the media, it may take time for them to be
displayed on the playback screen. Wait for a while as the POWER/
ACCESS lamp blinks, indicating normal operation.
0
Disclaimer
- We shall not be held responsible for loss of recorded contents when
recording videos/audio or playback cannot be operated due to
malfunctions in this unit, provided parts, or SD card.
- Once deleted, recorded contents (data), including data loss due to
malfunctions in this unit, cannot be restored. Please be forewarned.
- JVC will not be responsible for any lost data.
- In order for quality improvement, defective recording medium is subject
to be analyzed. Therefore, it may not be returned.
Normal Playback
Plays back the recorded videos.
1
Open the LCD monitor.
.
A
0
Check if the recording mode is A.
0
If
the mode is B still image, tap B on the recording screen to display
the mode switching screen.
Tap A to switch the mode to video.
2
Tap M to select the playback mode.
.
≪PLAY
REC
MENU
3
Tap the file (image).
.
≪REC
PLAY
0
Tap I/J to select the media for playback and change the index
screen (thumbnail display).
0
L appears on the last image played back.
0
Lines
in different colors are displayed under the thumbnail display to
distinguish the recording date.
0
Images recorded in 50p mode and 50i mode are displayed on the
index screen separately.
0
To view the images recorded in 50p mode, set “SYSTEM SELECT”
in the video recording menu to “50p” before selecting the playback
mode. In cases such as during Digest Playback or when playing back/
editing a playlist, set “SYSTEM SELECT” in the same way before
operating.
0
To view the images recorded in 50i mode, set “SYSTEM SELECT” in
the video recording menu to “50i” before selecting the playback
mode. In cases such as during Digest Playback or when playing back/
editing a playlist, set “SYSTEM SELECT” in the same way before
operating.
4
Playback starts.
0
Tap e to pause.
0
Tap u to return to the index screen.
Caution :
0
While this unit may be used with the LCD monitor reversed and closed,
the temperature rises more easily. Do not use this unit with the LCD
monitor
reversed and closed for long periods of time, or in places exposed
to direct sunlight or high temperatures.
0
The power may turn off to protect the circuit if the temperature of this unit
rises too much.
Playback
54
Operation Buttons for Video Playback
During Index Screen Display
.
≪REC
PLAY
DisplayDescription
A
A/BSwitches between video mode (50i/50p) and
still image mode.
B
(Date and Time
Display)
Moves to the previous/next date
C
>Displays the next index screen (thumbnail
display)
0
You
can perform the same operation with the
zoom lever.
D
<Displays the previous index screen (thumbnail
display)
0
You
can perform the same operation with the
zoom lever.
E
3
Switches to the recording mode.
F
J
Moves to the mark playback mode.
“ MARKING PLAYBACK ” (A p. 59
)
G
R
Displays the index screen (thumbnail display)
to perform deletion
H
I/JSwitches between the memories in which
images are recorded (I built-in memory/J
SD card)
I
MENUDisplays the menu screen.
J
Thumbnail (File)Tap: Starts playback
Drag
to right: Displays the file taken before the
recording date
Drag to left: Displays the file taken after the
recording date
Thumbnails with the same underlined color
indicate files with the same recording date.
During Video Playback
.
MENU
≪REC
0:01:230:12:34
0
When
this unit is not operated, the operation buttons on the touch screen
disappear automatically. Tap on the screen to display the operation
buttons again.
DisplayDescription
A
A/BSwitches between video and still image
modes.
B
(Timeline Bar)Tap on a random position - Moves to the
tapped position
Drag playback point to the left or right - Starts
playback from the new position
Tap on a random position - Moves to the
tapped position
C
(Pointer)Displays the current estimated playback
position within the scene
D
A
Saves one scene of the video being played
back as a still image.
0
Displayed while playback is paused.
E
h
Returns to the beginning of the scene Returns
to
the previous scene if tapped at the beginning
of a scene.
0
Allows the same functions as the zoom lever
to be performs while pausing playback.
F
j (during
playback)
Reverse search (speed increases with each
tap)
l (during pause
mode)
Reverse slow-motion / Press and hold to start
reverse slow playback
G
d
Starts playback
e
Pause
H
i (during
playback)
Forward search (speed increases with each
tap)
k (during pause
mode)
Forward slow-motion / Press and hold to start
slow playback
I
g
Advances to the next scene
J
edSlow playback
0
The speed can be set using
“SLOW-
MOTION SPEED” (A p. 152) .
Playback
55
DisplayDescription
K
n
Switches the display between full (m) and
simple (n) with every tap of the button.
0
Simple display: Some displays disappear
automatically when the screen is not
operated.
0
Full display: Displays everything. The
display button changes from n to m.
0
When the power is turned off, the display
setting will revert to simple display (n).
L
3
Switches to the recording mode.
c
u
Stop (returns to index screen)
d
R
Deletes the currently displayed video.
e
2
Enlarges the displayed video.
0
Tap the position of the image you want to
enlarge.
0
Zoom ratio changes by using the (+) and (-)
buttons.
f
MENUDisplays the menu screen.
Memo :
0
Tap or drag on the operation area of the touch screen.
0
The recording date and time can be displayed on the screen during
playback.
(A p. 152
)
Adjusting the Volume of Videos
You can use the zoom/volume lever to control the volume.
.
T
W
VOL.
+
Turn up the volume
Turn down the volume
Playback
56
Checking the Recording Date and Other Information
You can see the recording information of the recorded videos.
1
Open the LCD monitor.
.
A
0
Tap A or B to select the video or still image mode.
2
Tap M to select the playback mode.
.
≪PLAY
REC
MENU
3
Tap on the file to start playback.
.
≪REC
PLAY
4
Tap “MENU”.
.
MENU
≪REC
0:01:230:12:34
5
Tap C.
.
OFF
TOP MENU
SETTING
PLAYBACK
EDIT
SETTINGS
CONNECTION
SETUP
0
Tap L to exit the menu.
You can display the recording date and duration of the selected file.
.
00:10:00
:
:
:
:
PROTECT
QUALITY
PB TIME
DATE/TIME
OFF
Playback
57
TIME COUNTER PLAYBACK
A time counter that can be reset can be displayed during playback.
This can be used to play sports video.
1
Open the LCD monitor.
.
A
0
Check if the recording mode is A.
0
If
the mode is B still image, tap B on the recording screen to display
the mode switching screen.
Tap A to switch the mode to video.
2
Tap M to select the playback mode.
.
≪PLAY
REC
MENU
3
Tap “MENU”.
.
≪REC
PLAY
4
Tap “PLAYBACK SETTING”.
.
OFF
TOP MENU
SETTING
PLAYBACK
EDIT
SETTINGS
CONNECTION
SETUP
5
Tap “TIME COUNTER PLAYBACK”.
.
PLAYBACK SETTING
TIME COUNTER PLAYBACK
6
Set “TIME COUNTER PLAYBACK” to ON.
.
TIME COUNTER PLAYBACK
ON
OFF
7
Tap on the file to start playback.
.
≪REC
PLAY
0
An hours:minutes:seconds counter appears.
8
Pause the playback and reset the counter.
.
MENU
≪REC
0:01:230:12:34
RESET
Button
Display
Button
0
Tapping “RESET” sets the counter reading to “0:00:00”.
0
The 1/10 second digit is displayed while playback is paused.
0
The counter can also be reset during normal playback and slow
playback.
Memo :
0
To reset the counter during playback, switch to full display using the
“Display Buttonn” (A p. 22) button.
0
To reset the counter at the precise position, it is recommended to pause
the playback then tap “RESET”.
0
When the unit switches to the next scene, the counter is automatically
reset.
Playback
58
MARKING PLAYBACK
0
You
can use the smartphone application to search the marked scenes and
the goal scenes in Game Score.
You can also extract and play back only the marked scenes and the goal
scenes.
0
Switch to the mark playback mode by tapping J on the video playback
screen.
1
Open the LCD monitor.
.
A
0
Check if the recording mode is A.
0
If
the mode is B still image, tap B on the recording screen to display
the mode switching screen.
Tap A to switch the mode to video.
2
Tap M to select the playback mode.
.
≪PLAY
REC
MENU
3
Tap J to open the mark playback mode.
.
≪REC
PLAY
4
Tap “DIGEST” to select the DIGEST/Mark Playback mode.
.
SET
MARKING PLAYBACK
0
When the thumbnail display is tapped directly (without tapping the
“DIGEST” button), normal playback starts.
0
Tap “SET” to adjust the playback time per scene and the playback
position.
“ GAME PLAYBACK ” (A p. 60
)
“Adjusting the Marked Playback Position” (A p. 62)
0
List of recorded game is displayed when “GAME” is selected.
“ GAME PLAYBACK ” (A p. 60)
5
Select the recording date of the video that you want to playback.
.
SELECT DATE
ALL SCENES
0
Tap “ALL SCENES” to playback all scenes.
6
Select the type of the “MARK”.
.
GOAL MARKING
MANUAL MARKING
ALL MARKINGS
ALL SCENES
7
Digest Playback starts.
.
MENU
≪REC
DIGEST
0:01:23
8
Digest playback stops automatically, or display the next screen by
tapping “MENU”.
.
PLAYBACK AGAIN
SELECT DATE
NORMAL MARKING P/B
0
NORMAL MARKING P/B: start normal marking playback.
0
PLAYBACK AGAIN: start the digest playback again.
0
SELECT DATE: return to step 5.
Playback
59
Indications during the Marking Playback
During the Normal Marking Playback
.
≪REC
0:01:23
HOME
VISITOR
2
1
3
DisplayDescription
A
Elapsed TimeDisplayed the playback time of the video.
B
“D” icon displayed
“P” icon displayed
Indicates that the current scene is marked.
Indicates that recording of the score is in
progress.
C
ScoreDisplays the score of the game (displayed only
if the score is registered.)
During the DIGEST/Mark Playback
.
MENU
DIGEST
≪REC
0:01:23
HOME
1-1
VISITOR
3
5
2
4
1
DisplayDescription
A
Date and time
display
Displays the recording date (when date is
selected).
B
DIGEST Playback
Cancel Button
Moves to the normal mark playback.
C
Elapsed TimeDisplayed the playback time of the video.
D
“D” icon displayed
“P” icon displayed
Indicates that the current scene is marked.
Indicates that recording of the score is in
progress.
E
ScoreDisplays the score of the game (displayed only
if the score is registered.)
GAME PLAYBACK
0
Game
playback is a function to play back the goal scenes and/or marked
scene that is recorded by the smartphone application Everio sync. 3.
0
To start, tap J on the playback screen.
0
For details on game score recording, refer to “Using Smartphone
Applications” (A p. 114) .
1
Open the LCD monitor.
.
A
0
Check if the recording mode is A.
0
If
the mode is B still image, tap B on the recording screen to display
the mode switching screen.
Tap A to switch the mode to video.
2
Tap M to select the playback mode.
.
≪PLAY
REC
MENU
3
Tap J to open the mark playback mode.
.
≪REC
PLAY
4
Tap “GAME” to select the game playback mode.
.
SET
MARKING PLAYBACK
Playback
60
5
Tap the recorded game.
.
SET
GAME PLAYBACK
0
Tap the list of the game to playback all the scenes of the game.
0
Tap
DIGEST to extract the score and marked scenes from the game,
and to start a DIGEST playback.
6
Marked scenes are played back automatically.
.
MENU
DIGEST
0:01:23
0
Playback stops after all the scenes are played back.
0
Tap DIGESTL during DIGEST playback to exit the Mark/DIGEST
playback and to switch to the normal mark playback.
Indications during the Game Playback
o
During the Normal Game Playback
.
≪REC
0:01:23
HOME
VISITOR
2
1
3
DisplayDescription
A
Recorded timeDisplays the time that the video is recorded.
B
“D” icon displayed
“P” icon displayed
Indicates that the current scene is marked.
Indicates that recording of the score is in
progress.
C
ScoreDisplays the score of the game (displayed only
if the score is registered.)
o
During the DIGEST/Game Playback
.
MENU
DIGEST
0:01:23
HOME
1-1
VISITOR
3
2
4
5
1
DisplayDescription
A
Date and time
display
-
B
DIGEST Playback
Cancel Button
Moves to the normal mark playback.
C
Recorded timeDisplays the time that the video is recorded.
D
“D” icon displayed
“P” icon displayed
Indicates that the current scene is marked.
Indicates that recording of the score is in
progress.
E
ScoreDisplays the score of the game (displayed only
if the score is registered.)
Memo :
0
Once
a scene is marked, the next mark won’t be made within 5 seconds.
Playback
61
Adjusting the Marked Playback Position
Specify the length of time before and after the marked position for playing
back the marked video. The maximum length of playback time per mark is
20 seconds.
1
Open the LCD monitor.
.
A
0
Check if the recording mode is A.
0
If
the mode is B still image, tap B on the recording screen to display
the mode switching screen.
Tap A to switch the mode to video.
2
Tap M to select the playback mode.
.
≪PLAY
REC
MENU
3
Tap J to open the mark playback mode.
.
≪REC
PLAY
4
Tap “SET”.
.
SET
MARKING PLAYBACK
5
Select the items for setting.
.
P/B POSITION ADJUST
P/B TIME PER SCENE
SETTINGS
0
Proceed
to Step 6 if “P/B TIME PER SCENE” is selected, and proceed
to Step 7 if “P/B POSITION ADJUST” is selected.
6
Select the playback time per scene.
.
20SEC
10SEC
P/B TIME PER SCENE
0
Tap J to return to the previous screen.
7
Adjust the playback position.
.
0
P/B POSITION ADJUST
SET
0
Shift the playback position back and forth. Playback time that is set
in step 6 is unchanged.
0
Adjust by using 0 or 1, then tap “SET”.
0
Tap J to return to the previous screen.
0
Tap L to exit the menu.
Playback
62
DIGEST PLAYBACK
You can play back a digest of recorded videos (Digest Playback).
This is useful for checking the content of videos quickly.
1
Open the LCD monitor.
.
A
0
Check if the recording mode is A.
0
If
the mode is B still image, tap B on the recording screen to display
the mode switching screen.
Tap A to switch the mode to video.
2
Tap M to select the playback mode.
.
≪PLAY
REC
MENU
3
Tap “MENU”.
.
≪REC
PLAY
4
Tap “PLAYBACK SETTING”.
.
OFF
TOP MENU
SETTING
PLAYBACK
EDIT
SETTINGS
CONNECTION
SETUP
5
Tap “DIGEST PLAYBACK”.
.
DIGEST PLAYBACK
PLAYBACK SETTING
6
Tap to select a date for Digest Playback.
.
NEXT
SELECT DATE
0
After selecting a date, tap “NEXT”.
0
When “ALL” is tapped, Digest Playback will be performed for all the
dates.
0
Tap L to exit the menu.
0
Tap J to return to the previous screen.
7
Select the Digest Playback time
(Only when “AUTO” is selected in Step 7)
.
2h21m
≪REC
1 min
1 min
1 min5 min
5 min
5 min15 min
15 min
15 min45 min
45 min
45 min
3 min
3 min
10 min
10 min
30 min
30 min
60 min
60 min
3 min10 min30 min60 min
DIGEST TIME
0
Select the Digest Playback time in minutes (min).
0
The
time display of Digest Playback varies according to the recording
time.
0
When it takes time (more than 2 seconds) for “DIGEST PLAYBACK”
to start after selecting Digest Playback time, a progress status will be
displayed.
0
The Digest Playback time is only a guide.
8
Digest Playback starts.
.
MENU
≪REC
DIGEST
0:01:230:12:34
0
Tap e to pause.
0
Tap u to return to the index screen.
0
Tap “DIGESTL“ to return to the normal playback screen.
0
Operations During Video Playback
“Operation Buttons for Video Playback” (A p. 55)
9
Digest playback stops automatically, or display the next screen by
tapping “MENU”.
.
TO NORMAL PLAYBACK
PLAYBACK AGAIN
SELECT DATE
0
TO NORMAL PLAYBACK: start normal playback.
0
PLAYBACK AGAIN: start the digest playback again.
0
SELECT DATE: return to step 6.
Playback
63
PLAYBACK OTHER FILE
The management information of a video may be damaged if recording is not
performed
correctly, such as turning off the power in the middle of recording.
You can perform the following operations to play back the videos with
defective management information.
1
Open the LCD monitor.
.
A
0
Check if the recording mode is A.
0
If
the mode is B still image, tap B on the recording screen to display
the mode switching screen.
Tap A to switch the mode to video.
2
Tap M to select the playback mode.
.
≪PLAY
REC
MENU
3
Tap “MENU”.
.
≪REC
PLAY
4
Tap “PLAYBACK SETTING”.
.
OFF
TOP MENU
SETTING
PLAYBACK
EDIT
SETTINGS
CONNECTION
SETUP
5
Tap “PLAYBACK OTHER FILE”.
.
PLAYBACK SETTING
PLAYBACK OTHER FILE
6
Tap on the file to start playback.
.
MENU
≪REC
“Operation Buttons for Video Playback” (A p. 55)
0
Tap “L” to return to the usual index screen.
Memo :
0
An MTS file is created in the EXTMOV folder when management
information is corrupted.
0
Depending on the condition of the damaged file, playback might fail or
may not run smoothly.
Playback
64
Playing Back Still Images
You
can select and play back the recorded still images from an index screen
(thumbnail display).
1
Open the LCD monitor.
.
B
0
Check if the recording mode is B.
0
If the mode is A
video, tap A on the recording screen to display the
mode switching screen.
Tap B to switch the mode to still image.
2
Tap M to select the playback mode.
.
MENU
MENU
≪PLAY
3
Tap on the file to start playback.
.
MENU
≪REC
0
Tap I/J to select the media for playback and change the index
screen (thumbnail display).
0
Tap u to return to the index screen.
0
L appears on the last image played back.
0
Lines
in different colors are displayed under the thumbnail display to
distinguish the recording date.
Operation Buttons for Still Image Playback
During Index Screen Display
.
MENU
≪REC
0
Still images that are recorded continuously in high-speed or medium-
speed will be grouped together. Only the first recorded file (still image) is
shown and the group is displayed with a green frame.
DisplayDescription
A
A/BSwitches between video and still image
modes.
B
(Date and Time
Display)
Moves to the previous/next date
C
>Displays the next index screen (thumbnail
display)
0
You
can perform the same operation with the
zoom lever.
D
<Displays the previous index screen (thumbnail
display)
0
You
can perform the same operation with the
zoom lever.
E
3
Switches to the recording mode.
F
R
Displays the index screen (thumbnail display)
to perform deletion
G
I/JSwitches between the index screen of the built-
in memory and SD card
H
MENUDisplays the menu screen.
I
File (Still Image)Tap on thumbnail - Starts playback
Drag to right - Scrolls to the right to show the
previous index screen (thumbnail display)
Drag
to left - Scrolls to the left to show the next
index screen (thumbnail display)
Playback
65
During Still Image Playback
.
≪REC
MENU
0
When
this unit is not operated, the operation buttons on the touch screen
disappear automatically. Tap on the screen to display the operation
buttons again.
DisplayDescription
A
Video/Still Image
Mode
A/B
Switches between video and still image
modes.
B
h
Returns to the previous still image
0
You
can perform the same operation with the
zoom lever.
C
d / eStarts/pauses slideshow
D
g
Advances to the next still image
0
You
can perform the same operation with the
zoom lever.
E
3
Switches to the recording mode.
F
u
Returns to index screen
G
R
Deletes the currently displayed still image.
H
2Playback ZoomEnlarges the displayed video.
0
Tap the position of the image you want to
enlarge.
0
Zoom ratio changes by using the (+) and (-)
buttons.
I
MENUDisplays the menu screen.
Memo :
0
Tap or drag on the operation area of the touch screen.
Caution :
0
This unit is a microcomputer-controlled device. Electrostatic discharge,
external noise and interference (from a TV, a radio, etc.) might prevent it
from
functioning properly. In such a case, close the monitor screen to turn
off the power and remove the AC adapter, then press the Reset button to
reset this unit.
“Resetting this Unit” (A p. 6)
Slideshow Playback
Still images can be played back in a slideshow.
Tap I during still image playback to start the slideshow.
.
≪REC
MENU
“Operation Buttons for Still Image Playback” (A p. 65)
Memo :
0
Effects can be added to the transitions in slideshow playback.
“ SLIDE SHOW EFFECTS ” (A p. 154)
Playback
66
Connecting to and Viewing on TV
You can connect this unit to a TV for playback. The image quality on TV
varies with the type of TV and the connecting cable. Select the connector
that best suits your TV.
0
Refer also to the instruction manual of the TV in use.
“Connecting via the HDMI Mini Connector” (A p. 67
)
“Connecting via the AV Connector” (A p. 69)
0
To display the date and time on TV, set both “DISPLAY DATE/TIME” and
“DISPLAY ON TV” to “ON”.
(A p. 152)
“ DISPLAY ON TV ” (A p. 159)
Unnatural Displays on TV
TroubleAction
Images do not
appear on the TV
properly.
0
Disconnect the cable and connect again.
0
Turn off and on this unit again.
0
Images may not appear properly when the
remaining battery power is low. Use an AC
adapter.
Images are
projected vertically
on the TV.
0
Set “VIDEO OUTPUT” in the “CONNECTION
SETTINGS” menu to “4:3”.
“ VIDEO OUTPUT ” (A p. 159)
Images are
projected
horizontally on the
TV.
0
Adjust the TV's screen accordingly.
The color of images
looks strange.
0
Adjust the TV's screen accordingly.
HDMI-CEC
functions do not
work properly, and
the TV does not
work in conjunction
with this unit.
0
TVs may operate differently depending on the
specifications, even if they are HDMI-CEC
compliant. Therefore, the HDMI-CEC functions
of this unit cannot be guaranteed to operate in
combination with all the TVs. In such cases, set
“HDMI CONTROL” to “OFF”.
“ HDMI CONTROL ” (A p. 159)
The language on
the display
changed.
0
It may occur when you connect this unit to a TV
with different language setting using an HDMI
mini cable.
Caution :
0
Turn off this unit and the TV before making any connection.
0
Before inserting or removing the SD card, close the LCD monitor and
ensure that the POWER/ACCESS lamp goes off.
Connecting via the HDMI Mini Connector
If you are using an HDTV, you can play back in HD quality by connecting to
the HDMI mini connector.
“Optional Accessories” (A p. 20)
0
Use
a High Speed HDMI mini cable as the HDMI mini cable when not using
the provided one.
0
Refer also to the instruction manual of the TV in use.
1
Connect to a TV.
.
TV
HDMI Mini Cable (Provided)
HDMI Connector Input
To HDMI Mini Connector
2
Connect the adapter cable and AC adapter to this unit.
.
To USB Connector
Adapter Cable
(Provided)
AC Adapter
(Provided)
AC Adapter To
AC Outlet(AC
100 V to 240 V)
3
Open the LCD monitor.
.
0
The unit turns on automatically.
4
Press the input selection button on the TV to switch to the input to the
terminal that is connected to this camera.
.
HDMI
HDMI
Playback
67
5
Play back a file.
.
≪REC
PLAY
“Playing Back Videos” (A p. 54)
“Playing Back Still Images” (A p. 65)
Memo :
0
Change the settings in “HDMI OUTPUT” according to the connection.
“ HDMI OUTPUT ” (A p. 159)
0
When connected to the TV via the HDMI mini cable, images and sounds
may not be output properly depending on the TV connected.
In such cases, perform the following operations.
1) Disconnect the HDMI mini cable and connect it again.
2) Turn off and on this unit again.
0
For questions about the TV or method of connection, contact your TV's
manufacturer.
Operating in Conjunction with TV via HDMI
Connecting this unit to an HDMI-CEC enabled TV using the HDMI mini cable
allows linked operations with the TV to be performed.
0
HDMI-CEC (Consumer Electronics Control) is an industry standard that
enables interoperability between HDMI-CEC compliant devices that are
connected via HDMI cables.
Memo :
0
Not all HDMI control devices comply with the HDMI-CEC standard. The
HDMI control function of this unit will not work when connected to these
devices.
0
This
unit is not guaranteed to operate with all HDMI-CEC enabled devices.
0
Depending on the specifications of each HDMI-CEC enabled device,
some functions may not work with this unit. (For details, refer to the
instruction manual of your TV.)
0
Unintended operations may occur with some connected devices. In these
cases, set “HDMI CONTROL” to “OFF”.
“ HDMI CONTROL ” (A p. 159)
Preparations
0
Connect an HDMI mini cable between this unit and the TV.
“Connecting via the HDMI Mini Connector” (A p. 67)
0
Turn
on the TV and set the HDMI-CEC related setting to “ON”. (For details,
refer to the instruction manual of the TV.)
0
Set “HDMI CONTROL” in the CONNECTION SETTINGS menu to “ON”.
“ HDMI CONTROL ” (A p. 159)
Operation Method 1
1
Turn on this unit.
2
Select the playback mode.
3
Connect the HDMI mini cable.
0
TV turns on automatically and switches to HDMI input mode when
this unit is turned on.
Operation Method 2
1
Turn off the TV.
0
This unit turns off automatically.
Memo :
0
Depending on the TV connected, the display language of this unit will
automatically
switch to the language that is selected for the TV when this
unit is turned on.
(This is applicable only if this unit supports the language selected for the
TV.) To use this unit with a language that differs from the display language
of the TV, set “HDMI CONTROL” to “OFF”.
0
The display language of the TV will not switch automatically, even if the
display language of this unit is changed.
0
These functions may not work correctly when devices such as amplifier
and selector are connected. Set “HDMI CONTROL” to “OFF”.
0
If HDMI-CEC does not work properly, turn off and on this unit again.
Playback
68
Connecting via the AV Connector
To playback videos on TV, connect the AV cable (provided: E3A-0085-00)
to the AV terminal of this unit.
0
Refer also to the instruction manual of the TV in use.
1
Connect to a TV.
.
Audio Input (R)
Audio Input (L)
Video Input
TV
Red
White
Ye l l o w
AV Cable
(E3A-0085-00)
(Provided)
AV Input
To AV Connector
2
Connect the adapter cable and AC adapter to this unit.
.
To USB Connector
Adapter Cable
(Provided)
AC Adapter
(Provided)
AC Adapter To
AC Outlet(AC
100 V to 240 V)
3
Open the LCD monitor.
.
0
The unit turns on automatically.
4
Press the input selection button on the TV to switch to the input to the
terminal that is connected to this camera.
.
AV
AV
5
Play back a file.
.
≪REC
PLAY
“Playing Back Videos” (A p. 54)
“Playing Back Still Images” (A p. 65)
Memo :
0
For questions about the TV or method of connection, contact your TV's
manufacturer.
0
AV cable (provided: E3A-0085-00)
Wiring
specifications (for video/audio) of the 4-pole mini plug are described
in the following.
To purchase, consult your nearest JVC dealer or JVC service center.
.
Audio (Lch: white)
Audio (Rch: red)
Ground
Video (yellow)
0
When
using the provided AV cable, attach the core filter provided with this
unit first.
“Attaching the Core Filter” (A p. 9)
Playback
69
Deleting Unwanted Files
Delete unwanted videos and still images when the space in the recording
media is running out.
Doing so frees up more space in the recording media.
“Deleting the Currently Displayed File” (A p. 70)
“Deleting Selected Files” (A p. 70
)
Memo :
0
Deleted files cannot be restored.
0
Files that are protected cannot be deleted.
Release protection before deleting the file.
“Protecting Files” (A p. 71
)
0
Be sure to back up important files on a computer.
“Backing Up All Files” (A p. 85)
Deleting the Currently Displayed File
Deletes the currently displayed file.
Caution :
0
Deleted files cannot be restored.
1
Tap R.
.
MENU
≪REC
0:01:230:12:34
0
While the video mode is shown in the image, the same operations
apply for the still image mode.
2
Tap “YES”.
.
NOYES
(REMAINING SCENES: 0030)
DELETE?
0
Tap h / g to select the previous or next file.
0
When no file remains, the screen returns to the index screen.
Deleting Selected Files
Deletes the selected files.
Caution :
0
Deleted files cannot be restored.
1
Open the LCD monitor.
.
A
0
Tap A or B to select the video or still image mode.
0
Tap B or A on the recording screen to display the mode switching
screen.
Tap A to switch to the video mode A.
Tap B to switch to the still image mode B.
2
Tap M to select the playback mode.
.
REC
≪PLAY
MENU
0
While the video mode is shown in the image, the same operations
apply for the still image mode.
3
Tap R.
.
≪REC
PLAY
4
Tap on the files to delete.
.
QUIT
SET
REL ALL
SEL ALL
DELETE
0
P appears on the selected files.
To remove P from a file, tap on the file again.
0
Tap “SEL ALL” to select all files.
0
Tap “REL ALL” to release all selections.
Editing
70
5
Tap “SET”.
.
QUITSET
REL ALLSEL ALL
DELETE
0
If no file is selected, the “SET” button cannot be pressed.
6
Tap “EXECUTE” to confirm the deletion.
.
RETURN
EXECUTE
DELETE?
(REMAINING SCENES: 0030)
STOP
0
After deleting is complete, tap “OK”.
0
To cancel the deletion, tap “QUIT”.
Protecting Files
Prevent important videos/still images from being deleted accidently by
protecting them.
“Protecting/Releasing Protection of the Currently Displayed File”
(A p. 71)
“Protecting/Releasing Protection of Selected Files” (A p. 72
)
Caution :
0
When the recording media is formatted, even the protected files will be
deleted.
Protecting/Releasing Protection of the Currently Displayed
File
Protects or releases protection of the currently displayed file.
1
Tap “MENU”.
.
MENU
≪REC
0:01:230:12:34
0
While the video mode is shown in the image, the same operations
apply for the still image mode.
2
Tap “EDIT”.
.
OFF
TOP MENU
SETTING
PLAYBACK
EDIT
SETTINGS
CONNECTION
SETUP
3
Tap “PROTECT/CANCEL”.
.
PROTECT/CANCEL
EDIT
4
Tap “YES”.
.
PROTECT?
NO
YES
0
Tap h / g to select the previous or next file.
0
After setting, tap “OK”.
Editing
71
Protecting/Releasing Protection of Selected Files
Protects or releases protection of the selected files.
1
Open the LCD monitor.
.
A
0
Tap A or B to select the video or still image mode.
0
Tap B or A on the recording screen to display the mode switching
screen.
Tap A to switch to the video mode A.
Tap B to switch to the still image mode B.
2
Tap M to select the playback mode.
.
REC
≪PLAY
MENU
0
While the video mode is shown in the image, the same operations
apply for the still image mode.
3
Tap “MENU”.
.
≪REC
PLAY
4
Tap “EDIT”.
.
OFF
TOP MENU
SETTING
PLAYBACK
EDIT
SETTINGS
CONNECTION
SETUP
5
Tap “PROTECT/CANCEL”.
.
PROTECT/CANCEL
EDIT
6
Tap on the files to protect or release protection of.
.
SETREL ALL
SEL ALL
PROTECT/CANCEL
0
P appears on the selected files.
To remove P from a file, tap on the file again.
0
I
and P are displayed on the files that are already protected.
To release protection of a file, tap on the file such that P is removed.
0
Tap “SEL ALL” to select all files.
0
Tap “REL ALL” to release all selections.
7
Tap “SET” to complete the setting.
.
SETREL ALLSEL ALL
PROTECT/CANCEL
0
Protect marks I appear on the selected files.
Protect marks I disappear from the deselected files.
Editing
72
Capturing a Still Image in the Video During
Playback
You can capture still images of the scenes you like in the recorded videos.
1
Open the LCD monitor.
.
A
0
Check if the recording mode is A.
0
If
the mode is B still image, tap B on the recording screen to display
the mode switching screen.
Tap A to switch the mode to video.
2
Tap M to select the playback mode.
.
≪PLAY
REC
MENU
3
Tap on the desired video.
.
≪REC
PLAY
4
Tap pause e at the desired scene during playback.
.
MENU
≪REC
0:01:230:12:34
0
After pausing the video, you can fine-tune the point to capture by
tapping forward slow-motion k and reverse slow-motion l.
5
Tap the A button.
.
MENU
≪REC
0:01:230:12:34
Memo :
0
Still images are captured with a size of 1920×1080.
0
Captured still images are stored in the media where the video is being
played back from.
Editing
73
Combining Videos Recorded by Seamless
Recording
Videos that are recorded on two separate media and with “SEAMLESS
RECORDING” in the video recording menu enabled can be combined into
a single video.
“ SEAMLESS RECORDING ” (A p. 147)
1
Open the LCD monitor.
.
A
0
Check if the recording mode is A.
0
If
the mode is B still image, tap B on the recording screen to display
the mode switching screen.
Tap A to switch the mode to video.
2
Tap M to select the playback mode.
.
≪PLAY
REC
MENU
3
Tap “MENU”.
.
≪REC
PLAY
4
Tap “EDIT”.
.
OFF
TOP MENU
SETTING
PLAYBACK
EDIT
SETTINGS
CONNECTION
SETUP
5
Tap “SEAMLESS REC CTRL”.
.
SEAMLESS REC CTRL
EDIT
6
Tap “COMBINE SCENES”.
.
COMBINE SCENES
SEAMLESS REC CTRL
0
This unit starts a search to detect seamless videos.
Combining cannot be performed if no seamless videos are found.
7
Tap “YES”.
.
NOYES
COMBINE WITH THIS SCENE?
THE ABOVE SCENE IS FOUND
8
Tap the media to store to.
.
SD CARDBUILT-IN MEMORY
THE COMBINED SCENES
SELECT THE MEDIA TO STORE
9
Tap “YES”.
.
NOYES
START COMBINING THE SCENES?
0
Combining of the videos starts.
0
After videos are combined, tap “OK”.
Memo :
0
Seamless
videos cannot be combined if there is not enough free space in
the built-in memory or SD card. Check the amount of remaining free space
before combining.
How to Enable Seamless Video Recording Again
To start seamless recording again after the previous session is complete, it
is necessary to combine seamless videos, or delete the combination
information of the seamless videos.
To delete the combination information of seamless videos, select “DEL
COMBINED SCENES” in step 6.
Editing
74
Capturing a Required Part in the Video
(TRIMMING)
Select the required part of a video and save it as a new video file.
0
The original video remains in its existing location.
1
Open the LCD monitor.
.
A
0
Check if the recording mode is A.
0
If
the mode is B still image, tap B on the recording screen to display
the mode switching screen.
Tap A to switch the mode to video.
2
Tap M to select the playback mode.
.
≪PLAY
REC
MENU
3
Tap “MENU”.
.
≪REC
PLAY
4
Tap “EDIT”.
.
OFF
TOP MENU
SETTING
PLAYBACK
EDIT
SETTINGS
CONNECTION
SETUP
5
Tap “TRIMMING”.
.
TRIMMING
EDIT
6
Tap the video to edit.
.
QUIT
TRIMMING
7
Tap e to pause playback at the desired start point, then tap “A”.
.
0:01:230:12:34
QUIT
TRIMMING
0
When “A” is tapped, the start point is set.
0
After setting the start point, tap d to continue playback.
8
Tap e to pause playback at the desired end point, then tap “B”.
.
0:01:23
A 0:00:23
0:12:34
QUIT
TRIMMING
0
When “B” is tapped, the end point is set.
0
To reset the start or end point, tap “A” or “B” at the desired scene
(position).
0
You can fine adjust the position by pressing l
and k while
playback is paused.
9
Tap “SET”.
.
0:01:23
A 0:00:23B 0:12:34
0:12:34
QUIT
SET
TRIMMING
0
When “SET” is tapped, the trimming area is confirmed.
10
Tap “YES”.
.
NOYES
SPECIFIC AREA?
DO YOU WANT TO CAPTURE A
0
After copying, tap “OK”.
0
When copying finishes, the copied file is added to the index screen.
Memo :
0
The division point may deviate slightly from the selected scene.
Editing
75
Dubbing Files to a Disc by Connecting to a
Blu-ray Recorder
You
can dub videos in the high definition quality by connecting an AVCHD-
compliant Blu-ray recorder to this unit via a USB cable. For details on creating
the disc, refer to the instruction manual of your Blu-ray recorder.
0
This operation cannot be completed if the remaining battery power is not
enough. Charge the battery fully first.
1
Open the terminal cover.
2
Connect to a Blu-ray recorder.
0
Connect using the USB cable provided with this unit.
0
Before
making any connection, close the LCD monitor to turn off this
unit.
.
Blu-ray Recorder
USB Cable
(Provided)
USBUSB
3
Open the LCD monitor.
.
0
This unit turns on and the “SELECT DEVICE” screen appears.
4
Tap “CONNECT TO OTHER”.
.
CONNECT TO OTHER
TYPE TO CONNECT
SELECT DEVICE
SELECT DEVICE
5
Tap the desired media.
.
SD CARDBUILT-IN MEMORY
SELECT MEDIA TO OPEN
CONNECT TO OTHER
0
The following screen is displayed after the camera operation is
completed.
.
CONNECT TO OTHER
SD CARD
0
Operations are to be performed on the Blu-ray recorder after the
screen switches.
6
Perform dubbing on the Blu-ray recorder.
0
Refer also to the instruction manual of the Blu-ray recorder.
0
After dubbing is complete, close the LCD monitor of this unit and
check
that the POWER/ACCESS lamp goes off before disconnecting
the USB cable. Operations cannot be performed on this unit until the
USB cable is disconnected.
Copying
76
Copying Files to an SD Card
You can copy videos and still images from the built-in memory to SD card.
Copying
still images to cards makes it convenient to bring them to the shop
for printing (developing).
0
This operation cannot be completed if the remaining battery power is not
enough. Charge the battery fully first.
Caution :
0
Make sure that there is enough space left in the destination medium.
0
Videos in the SD card cannot be copied to the built-in memory.
1
Open the LCD monitor.
.
A
0
Tap A or B to select the video or still image mode.
2
Tap M to select the playback mode.
.
REC
≪PLAY
MENU
0
The
mode changes between recording and playback with every tap.
3
Tap “MENU”.
.
≪REC
MENU
PLAY
4
Tap “EDIT”.
.
OFF
TOP MENU
SETTING
PLAYBACK
EDIT
SETTINGS
CONNECTION
SETUP
5
Tap “COPY”.
.
EDIT
COPY
6
Tap on the files to copy.
.
QUIT
SETREL ALL
SEL ALL
QUANTITY:0030
0
P appears on the selected files.
To remove P from a file, tap on the file again.
0
Tap “SEL ALL” to select all files.
0
Tap “REL ALL” to release all selections.
7
Tap “SET”.
.
QUITSET
REL ALL
SEL ALL
QUANTITY:0030
0
“SET” is deactivated when no file is selected.
8
Tap “YES”.
.
NOYES
START COPY?
COPY QUANTITY:30
COPY VIDEO
0
Copying starts.
0
After copying, tap “OK”.
Copying
77
Copying to Windows PC
You can copy files to a computer using the provided software.
Discs can also be created using the computer’s DVD or Blu-ray drive.
If the provided software is not installed, this unit will be recognized as an external storage when connected.
Memo :
0
To record to discs, a recordable DVD or Blu-ray drive is required for the computer in use.
0
To create DVD-Video discs using the provided software, it is necessary to install the additional software (software for creating DVD-Video).
For details, refer to the Pixela homepage.
http://www.pixela.co.jp/oem/jvc/mediabrowser/e/
0
Backing up of files using other softwares is not supported.
Trouble with Using the Provided Software Everio MediaBrowser 4
Consult the customer service center below.
0
Pixela User Support Center
TelephoneUSA and Canada (English): +1-800-458-4029 (toll-free)
Europe (UK, Germany, France, and Spain)
(English):+800-1532-4865 (toll-free)
Other Countries in Europe
(English):+44-1489-250-012
Asia (Philippines) (English): +63-2-438-0090
Homepage
http://www.pixela.co.jp/oem/jvc/mediabrowser/e/
0
For details on how to use the software, refer to “MediaBrowser Help” in the “Help” menu of Everio MediaBrowser 4.
.
Verifying System Requirements (Guideline)
Windows 10
1
Right-click the “start button”, then select and click “System”.
.
2
Check the items with the table below.
.
0
If a “This PC” icon is shown on desktop, right-click the icon and select “Properties” in the menu to display your computer information.
Copying
78
Windows 8/Windows 8.1
1
Display “Apps”.
(For Windows 8) Click the “Search” charm.
(For Windows 8.1) Click F.
.
㩷
2
Right-click “Computer” or “PC” in the “Windows System Tool” menu to select the checkbox.
.
3
Click “Properties” on the bottom bar to display.
.
0
If a “Computer” icon is shown on desktop, right-click the icon and select “Properties” in the menu to display your computer information.
Copying
79
Windows 7
1
Click the start button.
.
2
Right-click “Computer”.
.
3
Click “Properties”.
.
Copying
80
4
Check the items with the table below.
.
Windows 10/Windows 8/Windows 8.1Windows 7
OSWindows 10 64-bit
Windows 10 Home or Windows 10 Pro
(Pre-installed versions, desktop mode only)
Windows 8 64-bit
Windows 8 or Windows 8 Pro
(Pre-installed versions, desktop mode only)
Windows8.1 64-bit
Windows8.1 or Windows8.1 Pro
(Pre-installed versions, desktop mode only)
Windows 7 32/64-bit
Home Premium
(Pre-installed versions only) Service Pack 1
CPUIntel Core Duo, CPU 1.66 GHz or higher
(Intel Core 2 Duo, CPU 2.13 GHz or higher recommended)
Intel Core Duo, CPU 1.66 GHz or higher
(Intel Core 2 Duo, CPU 2.13 GHz or higher recommended)
RAMAt least 2 GBAt least 2 GB
Video editingIntel Core i7, CPU 2.53 GHz or higher recommendedIntel Core i7, CPU 2.53 GHz or higher recommended
o
Other requirements
Display: 1024×768 pixels or above (1280×1024 pixels or above recommended)
Graphic: Intel G965 or higher recommended
Memo :
0
If your PC does not meet the above system requirements, operations of the provided software cannot be guaranteed.
0
For more information, contact your PC's manufacturer.
Copying
81
Installing the Provided Software (Built-in)
You can display the recorded images in calendar format and perform editing
using the provided software.
0
This operation cannot be completed if the remaining battery power is not
enough. Charge the battery fully first.
Preparations
Connect this unit to a computer with a USB cable.
o
Windows 10
1
Open the terminal cover.
2
Connect to your PC using the provided USB cable.
0
Before connecting the cable, close the LCD monitor to turn off this
unit.
.
To USB
Connector
To USB
Connector
Computer
3
Open the LCD monitor.
.
0
This unit turns on and the “SELECT DEVICE” menu appears.
4
Tap “CONNECT TO PC”.
.
CONNECT TO PC
TYPE TO CONNECT
SELECT DEVICE
SELECT DEVICE
5
Tap “PLAYBACK ON PC”.
.
PLAYBACK ON PC
CONNECT TO PC
0
Disconnect the USB cable to return to the recording or playback
screen.
0
“Everio Software Setup” appears on the computer.
Operations are to be performed on the computer after the screen
switches.
6
Perform the following operations on your computer.
A
Open the “Start menu”, then click “All apps”.
.
B
Click “This PC” in the “Windows System” menu.
.
0
If
a “This PC” icon is shown on desktop, double-click the icon to open “This
PC”.
C
Double-click the “JVCCAM_APP” icon in “Devices and drives”.
.
D
Double-click “install (or Install.exe)”.
.
E
Click “Yes” on the User Account Control screen.
0
“Software Setup” appears after a while.
7
Click “Everio MediaBrowser 4”.
.
0
Follow the on-screen instructions to finish the installation.
Copying
82
8
Click “Finish”.
.
9
Click “Quit”.
.
0
Installation is complete, and two icons are created on the desktop.
10
Remove this unit from your PC.
“Disconnecting this Unit from Computer” (A p. 86)
Memo :
0
If “Everio Software Setup” doesn’t appear, double-click “JVCCAM_APP”
in
“My Computer” or “Computer”, then double-click “install (or Install.exe)”.
0
If the auto play dialog box appears, select “Open folder to view files” and
click “OK”. Then, click “install (or Install.exe)” in the folder.
o
Windows 8/Windows 8.1
1
Open the terminal cover.
2
Connect to your PC using the provided USB cable.
0
Before connecting the cable, close the LCD monitor to turn off this
unit.
.
To USB
Connector
To USB
Connector
Computer
3
Open the LCD monitor.
.
0
This unit turns on and the “SELECT DEVICE” menu appears.
4
Tap “CONNECT TO PC”.
.
CONNECT TO PC
TYPE TO CONNECT
SELECT DEVICE
SELECT DEVICE
5
Tap “PLAYBACK ON PC”.
.
PLAYBACK ON PC
CONNECT TO PC
0
Disconnect the USB cable to return to the recording or playback
screen.
0
“Everio Software Setup” appears on the computer.
Operations are to be performed on the computer after the screen
switches.
6
Perform the following operations on your computer.
A
Display “Apps”.
(For Windows 8) Click the “Search” charm.
(For Windows 8.1) Click F.
.
㩷
B
Click “Computer” or “PC” in the “Windows System Tool” menu.
.
0
If a “Computer” icon is shown on desktop, double-click the icon to open
“Computer”.
C
Double-click the “JVCCAM_APP” icon in “Devices with Removable
Storage”.
.
D
Double-click “install (or Install.exe)”.
.
E
Click “Yes” on the User Account Control screen.
0
“Software Setup” appears after a while.
Copying
83
7
Click “Everio MediaBrowser 4”.
.
0
Follow the on-screen instructions to finish the installation.
8
Click “Finish”.
.
9
Click “Quit”.
.
0
Installation is complete, and two icons are created on the desktop.
10
Remove this unit from your PC.
“Disconnecting this Unit from Computer” (A p. 86)
Memo :
0
If “Everio Software Setup” doesn’t appear, double-click “JVCCAM_APP”
in
“My Computer” or “Computer”, then double-click “install (or Install.exe)”.
0
If the auto play dialog box appears, select “Open folder to view files” and
click “OK”. Then, click “install (or Install.exe)” in the folder.
o
Windows 7
1
Open the terminal cover.
2
Connect to your PC using the provided USB cable.
0
Before connecting the cable, close the LCD monitor to turn off this
unit.
.
To USB
Connector
To USB
Connector
Computer
3
Open the LCD monitor.
.
0
This unit turns on and the “SELECT DEVICE” menu appears.
4
Tap “CONNECT TO PC”.
.
CONNECT TO PC
TYPE TO CONNECT
SELECT DEVICE
SELECT DEVICE
5
Tap “PLAYBACK ON PC”.
.
PLAYBACK ON PC
CONNECT TO PC
0
“Everio Software Setup” appears on the computer.
Operations are to be performed on the computer after the screen
switches.
6
Perform the following operations on your computer.
A
Click “Open folder to view files” on the auto play dialog box, and then
double-click “install.exe”.
B
Click “Yes” on the User Account Control screen.
.
0
“Software Setup” appears after a while.
0
If it doesn’t appear, double-click “JVCCAM_APP” in “Computer” or “My
Computer”, then double-click “install.exe”.
Copying
84
7
Click “Everio MediaBrowser 4”.
.
0
Follow the on-screen instructions to finish the installation.
8
Click “Finish”.
.
9
Click “Quit”.
.
0
Installation is complete, and two icons are created on the desktop.
10
Remove this unit from your PC.
“Disconnecting this Unit from Computer” (A p. 86)
Memo :
0
If “Everio Software Setup” doesn’t appear, double-click “JVCCAM_APP”
in
“My Computer” or “Computer”, then double-click “install (or Install.exe)”.
0
If the auto play dialog box appears, select “Open folder to view files” and
click “OK”. Then, click “install (or Install.exe)” in the folder.
Backing Up All Files
Before making backup, make sure that enough free space is left in the
computer's hard disk (HDD).
Backup will not start if there is not enough free space.
0
This operation cannot be completed if the remaining battery power is not
enough. Charge the battery fully first.
1
Open the terminal cover.
2
Connect to your PC using the provided USB cable.
0
Before connecting the cable, close the LCD monitor to turn off this
unit.
.
To USB
Connector
To USB
Connector
Computer
3
Open the LCD monitor.
.
0
This unit turns on and the “SELECT DEVICE” menu appears.
4
Tap “CONNECT TO PC”.
.
CONNECT TO PC
TYPE TO CONNECT
SELECT DEVICE
SELECT DEVICE
5
Tap “BACK UP”.
.
BACK UP
CONNECT TO PC
0
Disconnect the USB cable to return to the recording or playback
screen.
0
The provided software Everio MediaBrowser 4 starts up on the
computer.
The subsequent operations are to be performed on the computer.
Copying
85
6
Select the source of the image file.
.
1
2
Click
Click
Click “Next”
Click “All volume in camcorder”
7
Start backup.
.
Click
Saving Destination (PC)
0
Backup starts.
8
After backup is complete, click “OK”.
.
Click
9
Remove this unit from your PC.
Memo :
0
Before making backup, load the SD card in which the videos and still
images are stored on this unit.
0
If you encounter any problems with the provided software Everio
MediaBrowser 4, please consult the “Pixela User Support Center”.
TelephoneUSA and Canada (English): +1-800-458-4029 (toll-free)
Europe (UK, Germany, France, and Spain)
(English):+800-1532-4865 (toll-free)
Other Countries in Europe
(English):+44-1489-564-764
Asia (Philippines) (English): +63-2-438-0090
Homepage
http://www.pixela.co.jp/oem/jvc/mediabrowser/e/
0
Delete unwanted videos before making backup.
It takes time to back up many videos.
“Deleting Unwanted Files” (A p. 70
)
Disconnecting this Unit from Computer
.
Click
1
Click “Safely Remove Hardware and Eject Media”.
2
Click all “JVCCAM~”.
3
Disconnect the USB cable and close the LCD monitor.
Copying
86
Organizing Files
After backing up your files, organize them by adding labels such as “Family
Trip” or “Athletic Meet”.
This is useful not only for creating discs, but for viewing the files too.
1
Double-click on the Everio MediaBrowser 4 icon.
0
The provided software starts up.
.
2
Display the month of the files to organize.
.
Click
Recording Month
3
Create a user list.
.
Recording Date
Click
.
2
1
Click
Input the name of the new
user list
0
A new user list is added to the user list library.
4
Click on the recording day.
0
The thumbnails of the files recorded on the day are displayed.
.
Recording Date
5
Register files to the created user list.
.
Drop
Drag
Thumbnails
User List
Identifying Video or Still Image:
0
You can select files using the “SELECT” menu on the top right of the
screen.
0
Check the video/still image icon on the top right corner of the thumbnail.
.
Still Image
Video
Memo :
0
If you encounter any problems with the provided software Everio
MediaBrowser 4, please consult the “Pixela User Support Center”.
TelephoneUSA and Canada (English): +1-800-458-4029 (toll-free)
Europe (UK, Germany, France, and Spain)
(English):+800-1532-4865 (toll-free)
Other Countries in Europe
(English):+44-1489-564-764
Asia (Philippines) (English): +63-2-438-0090
Homepage
http://www.pixela.co.jp/oem/jvc/mediabrowser/e/
Copying
87
Recording Videos to Discs
Copy the files that are arranged using the user list to discs.
1
Insert a new disc into the PC’s recordable DVD drive.
2
Select the desired user list.
.
Click
3
Select the disc type.
.
Click
4
Select the files to copy to disc in order.
.
Drop
Drag
Click
0
Click “Settings” to select the disc type.
0
Click “Select all” to select all the displayed files.
0
After selecting, click “Next”.
5
Set the title of the top menu of the disc.
.
Click
0
Click “Settings” to select the menu background.
0
After setting, click “Start”.
6
After copying is complete, click “OK”.
.
Click
Memo :
0
The
following types of discs can be used on the provided software Everio
MediaBrowser 4.
DVD-R
DVD-R DL
DVD-RW
DVD+R
DVD+R DL
DVD+RW
0
The following formats are supported by the provided software Everio
MediaBrowser 4.
AVCHD
DVD-Video*
* To create DVD-Video discs using the provided software, it is necessary to
install the additional software (software for creating DVD-Video).
For details, refer to the Pixela homepage.
http://www.pixela.co.jp/oem/jvc/mediabrowser/e/
0
Use commercially-available software to create a Blu-ray disc.
0
Use
Everio MediaBrowser 4 Player to play back an AVCHD disc. Refer to
the help file of the provided Everio MediaBrowser 4 software to operate.
0
When copying videos recorded in UXP recording mode to create an
AVCHD disc, the videos need to be converted to XP recording mode
before copying. Therefore, it may take a longer time than copying videos
recorded in other modes.
0
To view the help file of Everio MediaBrowser 4, select “Help” from the
Everio MediaBrowser 4’s menu bar or press F1 on the keyboard.
0
If you encounter any problems with the provided software Everio
MediaBrowser 4, please consult the “Pixela User Support Center”.
TelephoneUSA and Canada (English): +1-800-458-4029 (toll-free)
Europe (UK, Germany, France, and Spain)
(English):+800-1532-4865 (toll-free)
Other Countries in Europe
(English):+44-1489-564-764
Asia (Philippines) (English): +63-2-438-0090
Homepage
http://www.pixela.co.jp/oem/jvc/mediabrowser/e/
Copying
88
Backing Up Files Without Using Provided Software
Copy the files to a computer using the following method.
0
This operation cannot be completed if the remaining battery power is not
enough. Charge the battery fully first.
1
Open the terminal cover.
2
Connect to your PC using the provided USB cable.
0
Before connecting the cable, close the LCD monitor to turn off this
unit.
.
To USB
Connector
To USB
Connector
Computer
3
Open the LCD monitor.
.
0
This unit turns on and the “SELECT DEVICE” menu appears.
4
Tap “CONNECT TO PC”.
.
CONNECT TO PC
TYPE TO CONNECT
SELECT DEVICE
SELECT DEVICE
5
Tap “PLAYBACK ON PC”.
.
PLAYBACK ON PC
CONNECT TO PC
0
Disconnect the USB cable to return to the recording or playback
screen.
0
Close the Everio MediaBrowser 4 program, if it starts.
0
The following screen is displayed after the camera operation is
completed.
.
PLAYBACK ON PC
0
Operations are to be performed on the computer after the screen
switches.
6
(Windows 10)
Click “This PC” in “Windows System”, then click the “JVCCAM_MEM”
or “JVCCAM_SD” icon of “This PC”.
(Windows 8)
Right-click “Computer” in the “Windows System Tool” menu to select
the checkbox, and then click the “JVCCAM_MEM” or “JVCCAM_SD”
icon.
(Windows 7)
Select “Computer” from the “Start” menu, then click on the
“JVCCAM_MEM” or “JVCCAM_SD” icon.
0
Open the folder with the desired files.
“List of Files and Folders” (A p. 90)
7
Copy the files to any folder in the computer (desktop, etc).
Caution :
0
When the camera and PC are connected by an USB cable, recorded
media are read-only.
Memo :
0
To edit/view the files, use a software that supports AVCHD (video)/JPEG
(still image) files.
0
The above operations on computer may vary with the system used.
Disconnecting this Unit from Computer
.
Click
1
Click “Safely Remove Hardware and Eject Media”.
2
Click all “JVCCAM~”.
3
Disconnect the USB cable and close the LCD monitor.
Copying
89
List of Files and Folders
Folders and files are created in the built-in memory and SD card as shown below.
They are created only when necessary.
.
[JVCCAM_MEM]
[JVCCAM_SD]
[ DCIM ][ 100JVCSO ]
[ 101JVCSO ]
[ 102JVCSO ]
[ AVCHD ]
[ AVCHD ]
[ BDMV ]
[ STREAM ]
[ BACKUP ]
[ CLIPINF ]
[ PLAYLIST ]
[ INDEX.BDM ]
[ MOVIEOBJ.BDM ]
[ EXTMOV ]
[ PRIVATE ]
DEM_0000.MTS
MOV_0001.MTS
MOV_0002.MTS
MOV_0003.MTS
…
…
…
[ XXXXX.MTS ]
[ JVC ]
PIC_0001.JPG
PIC_0002.JPG
PIC_0003.JPG
(Video files with defective management information)
*There may be no demo video file.
(Demo Video File)
(Video File)
Still Image File
(Management Information)
Still Image Folder
(SD Card)
(SD Card)
(Built-In Memory)
(Built-In Memory)
[ BDMV ]
[ STREAM ]
[ BACKUP ]
[ CLIPINF ]
[ PLAYLIST ]
[ INDEX.BDM ]
[ MOVIEOBJ.BDM ]
…
[ XXXXX.MTS ]
(Video File)
Caution :
0
When the camera and PC are connected by an USB cable, recorded media are read-only.
Copying
90
Copying to Mac Computer
Copy the files to a Mac computer using the following method.
Caution :
0
This operation cannot be completed if the remaining battery power is not
enough. Charge the battery fully first.
1
Open the terminal cover.
2
Connect to your PC using the provided USB cable.
0
Before connecting the cable, close the LCD monitor to turn off this
unit.
.
To USB
Connector
To USB
Connector
Computer
3
Open the LCD monitor.
.
4
Tap “CONNECT TO PC”.
.
CONNECT TO PC
TYPE TO CONNECT
SELECT DEVICE
SELECT DEVICE
5
Tap “PLAYBACK ON PC”.
.
PLAYBACK ON PC
CONNECT TO PC
0
Disconnect the USB cable to return to the recording or playback
screen.
0
The following screen is displayed after the camera operation is
completed.
.
PLAYBACK ON PC
0
The “JVCCAM_MEM” or “JVCCAM_SD” icon appears on the
desktop.
6
Load image file to iPhoto.
0
iPhoto
launches automatically and videos recorded in the camera are
displayed. Load the necessary images.
0
Images on the built-in memory and SD card are displayed separately.
Switch between JVCCAM_MEM (built-in memory) and JVCCAM-SD
(SD card) displayed under “Devices” in the iPhoto “Source list”.
0
Videos loaded using iPhoto cannot be edited using iMovie. To edit
videos, load the files from iMovie.
7
Edit the video using iMovie.
0
Run iMovie and load the necessary videos to iMovie.
0
Videos loaded using iPhoto cannot be imported to iMovie.
0
For details on operating iMovie, refer to the help file of iMovie.
Caution :
0
Do not remove the cable or turn off this unit before image loading is
complete.
0
When the camera and PC are connected by an USB cable, recorded
media are read-only.
0
MTS files that are copied to a Mac computer cannot be imported to iMovie.
To use MTS files with iMovie, import the files using iMovie.
Memo :
0
To edit/view the files, use a software that supports AVCHD (video) files.
0
When removing this unit from the computer, drag and drop the
“JVCCAM_MEM” or “JVCCAM_SD” icon on the desktop to the trash bin.
iMovie and iPhoto
You can import files from this unit to a computer using Apple’s iMovie '8,
iMovie '9, iMovie '11, iMovie version 10 (video), or iPhoto (still image).
For the PC operating system of iMovie and iPhoto, check the information
provided by Apple.
0
For the latest information on iMovie or iPhoto, refer to the Apple website.
0
For details on how to use iMovie or iPhoto, refer to the help file of the
respective softwares.
0
There is no guarantee that the operations will work with all computer
environments.
Copying
91
Wi-Fi Capabilities
This unit is equipped with Wi-Fi function.
You can do the following using a smartphone via wireless connection.
DIRECT CONNECTION
0
You can monitor the images captured on the camera from the smartphone via direct connection (Wi-Fi Direct).
Recording of videos and still images may be performed while monitoring.
“Image Monitoring via Direct Connection (DIRECT MONITORING)” (A p. 95)
.
0
You
can record the location information of the venue where recording is taking place via direct connection (Wi-Fi Direct) with a smartphone supporting the
GPS function.
The recorded location information can be used on the MediaBrowser software provided with this unit.
“Recording the Location Information” (A p. 99)
.
GPS
0
Enter a mark in the desired scene on the smartphone via direct connection (Wi-Fi Direct) during recording to make it easy to find the scene later.
“Using the Markings” (A p. 115)
0
You can record the scores of various sport games with the video images via direct connection (Wi-Fi Direct) with a smartphone.
In addition, the recorded position can be marked to make it easy to find the scenes you want to view later.
“Using the Game Score” (A p. 116
)
0
Functions such as playback of recorded videos and displaying 2 different playback images for comparison are available by using a tablet device via direct
connection (Wi-Fi Direct).
“Using Tablet Applications” (A p. 126)
Using Wi-Fi
92
ACCESS POINT CONNECTION
[INDOOR MONITORING]
0
You can check the image captured on the camera by connecting a smartphone via an access point (wireless LAN router).
Recording of videos and still images may be performed while monitoring.
“Image Monitoring via an Access Point at Home (INDOOR MONITORING)” (A p. 102
)
.
[OUTDOOR MONITORING]
0
You can monitor the images captured on the camera from the smartphone via Internet connection.
0
You can also send images when you are outside by using the tethering function of the smartphone or using a mobile router.
Recording of videos and still images may be performed while monitoring.
“Image Monitoring via the Internet (OUTDOOR MONITORING)” (A p. 105
)
“ OUTDOOR MONITORING ” (A p. 139)
* To use this function, it is necessary to prepare for an UPnP (Universal Plug and Play) compatible wireless LAN router, and an internet connection from
which the global IP address can be obtained.
.
Terms Used in this Guide:
0
In this guide, operations on the touch panel are described as “tap”.
0
While the names of the buttons on a smartphone are written as “MENU” or “RETURN”, they may vary according to the smartphone in use.
Refer also to the instruction manual of your smartphone.
Using Wi-Fi
93
Operating Environment
To check the image on the camera from a smartphone, and to transfer
videos/still images, it is necessary to meet the following requirements.
Android Smartphone and Tablet Device
o
Everio sync. 3
A
OS: Android4.1 or higher
(This unit is not guaranteed to operate with all models.)
B
Supports GPS function (for GPS recording)
C
Able to connect to the Internet or Google Play (required for installing
“Everio sync. 3”)
o
JVC CAM Coach 2 (for tablets only)
A
OS: Android4.1 or higher
(This unit is not guaranteed to operate with all models.)
B
Display size: 7-inch or larger
C
Able to connect to the Internet or Google Play (required for installing
application)
iPhone/iPod touch
o
Everio sync. 3
A
OS: iOS8.1 or higher
(This unit is not guaranteed to operate with all models.)
B
Able
to connect to the Internet or “App Store™” (required for installing
application)
o
JVC CAM Coach 2 (for iPad only)
A
OS: iOS8.1 or higher
(This unit is not guaranteed to operate with all models.)
B
Able to connect to the Internet or “App Store™” (required for installing
application)
Precautions on Using Wi-Fi
Cautions on Wi-Fi Function
0
Operation is not guaranteed on all devices.
0
This function is not designed for disaster or crime prevention.
0
To
prevent the situation of forgetting to turn off the power, this unit will turn
off automatically after 10 days of continuous usage.
0
Leaving the LCD monitor open makes it easier to receive radio waves.
Therefore, it is recommended to open the LCD monitor when using the
Wi-Fi function.
0
Security of Wireless LAN
An advantage of wireless LAN is that instead of using a LAN cable, it
transmits information using radio waves, thus enabling LAN connection
to be established within the area covered by the radio waves. However,
as radio waves penetrate through objects (such as walls) within the range
that they cover, security issues, such as interception of transmission or
illegal access, may arise if security settings are not configured.
Before you connect to the network in a wireless LAN environment, read
through the instruction manual for the wireless LAN device in use, and
configure the security settings accordingly. Failure to do so may increase
the risk of personal information being intercepted, such as user names,
passwords, and the content of your mails, or illegal access to the network.
0
Due to the design of wireless LAN, note that security may be breached by
unusual or unforeseeable means.
0
For more details on wireless LAN and network security, please consult the
manufacturer of your wireless LAN device.
0
JVC shall not be liable for any security issues, troubles, damages or losses
arising from the use of this feature.
0
Wi-Fi function is not available underwater.
Radio Waves Used by this Product
This product makes use of radio waves in the ISM band (2.4 GHz).
Although
a radio station license is not required for using this product, please
take note of the following.
o
Do not use this product near the following places.
0
Industrial, scientific, or medical equipment, such as microwave ovens and
pacemakers
0
Industrial, scientific, or medical equipment, such as microwave ovens and
pacemakers
0
Specified low-power radio stations (radio station license not required)
0
Bluetooth devices
Equipment such as the above mentioned devices makes use of the same
frequency bandwidth as that of Wi-Fi.
Using this product near the above equipment may cause radio wave
interference, and result in communication failure or a drop in communication
speed. In this case, turn off the power of devices that are not in use.
o
Avoid using this product near a TV or radio set.
TV or radio sets make use of a radio wave frequency bandwidth that is
different from that of Wi-Fi, and therefore has no effect on communication
by this product or the TV/radio set.
However, when a TV/radio set is placed close to a Wi-Fi product,
electromagnetic waves emitted by the Wi-Fi product may cause noise to
occur in the sound or images of the TV/radio.
0
Communication may not be carried out properly near radio equipment or
broadcasting stations. In this case, change the location accordingly.
Using Wi-Fi
94
o
Radio signals are unable to penetrate through reinforced
steel, metal, or concrete.
The radio waves used by this product are unable to penetrate through
reinforced steel, metal, or concrete materials.
It
may difficult for communication to be established if two rooms or floors are
separated by these materials.
*Communication may also get weaker when there are human subjects or
parts of the body in between the Wi-Fi devices.
o
Do not connect to wireless networks that you do not have
authorization for.
Once connected, it may be considered as unauthorized access and legal
actions can be taken against you.
o
Do not use the Wi-Fi function outside the country of
purchase.
Depending on the country, there may be restrictions on the use of radio
waves and any violations could be punishable by law.
Exporting/Bringing the Unit Overseas
Permission from the U.S. government may be required when bringing the
unit to an export controlled country set by the U.S. government (such as
Cuba, Iraq, North Korea, Iran, Rwanda, and Syria. As of December, 2012).
For more information, consult the U.S. Embassy Commercial Service.
Image Monitoring via Direct Connection
(DIRECT MONITORING)
You
can check the image captured on the camera via direct connection (Wi-
Fi Direct) with a smartphone, without the need for an access point (wireless
LAN router).
0
Recording of videos and still images may be performed while monitoring.
.
Caution :
0
This function is not designed for disaster or crime prevention.
0
To
prevent the situation of forgetting to turn off the power, this unit will turn
off automatically after 10 days of continuous usage.
0
When not monitoring from a smartphone, the focus of the camera is fixed.
0
Even when monitoring from a smartphone, the focus of the camera will be
fixed if not operated for more than 3 hours. (Focus works again when the
camera is operated.)
0
You may have difficulty establishing a connection via direct monitoring in
an environment where the camera is placed away from the smartphone.
In this case, connect using the access point (wireless LAN router).
“Image Monitoring via an Access Point at Home (INDOOR MONITORING)”
(A p. 102)
0
Depending on the device in use or connecting environment, it may take
some time to establish a connection.
What You Need
0
Smartphone
(Wi-Fi that is compatible with WPA2 is necessary.)
Settings Required in Advance
Set up your camera and smartphone by performing the following operations.
For a smartphone with WPS support, refer to the “Wi-Fi Protected Setup
(WPS)”.
*WPS
is a method to connect the camera and the smartphone wirelessly by
easy button operations.
Using Wi-Fi
95
Connecting Smartphone Directly to Camera (Wi-Fi Direct)
Connect the smartphone directly (Wi-Fi Direct) to the camera by either of the
following methods.
o
Connection by entering the Wi-Fi password
1
Tap “MENU”.
(Operation on this camera)
Set the camera to the recording mode.
.
REC
≪PLAY
MENU
0
The top menu appears.
2
Tap the “Wi-Fi” (Q) icon.
(Operation on this camera)
.
OFF
SETUP
TOP MENU
Wi-Fi
SETTING
RECORD
SETTINGS
CONNECTION
3
Tap the “DIRECT CONNECTION” (N) icon in the “Wi-Fi” menu.
(Operation on this camera)
.
Wi-Fi
Wi-Fi SETTING
ACCESS POINT
CONNECTION
CONNECTION
DIRECT
0
When
“50p” is selected for “SYSTEM SELECT”, the following display
appears and recording mode is switched to the 50i mode.
.
WHEN USING Wi-Fi
VIDEO RECORDING AT 50i
DIRECT CONNECTION
4
Check the SSID and the PASS being displayed on the screen of the
camera.
.
WPS
PASS:********************************
SSID:********************************
DIRECT CONNECTION
CONNECTING DEVICE
SET UP Wi-Fi SETTING ON
OK
5
Select
the SSID in step 4 from the Wi-Fi network selection screen of your
smartphone, and enter the PASS on the password screen.
(Operation on the smartphone)
.
0
For
details on connecting your smartphone to a Wi-Fi network, please
refer to the instruction manual of the device in use.
6
A connection is established and Q appears on the camera’s screen.
.
REC
0:00:00 [2:04]
0:00:00 [2:04]
STOP
DIRECT MONITORING
o
Connection by Wi-Fi Protected Setup (WPS)
1
Tap “MENU”.
(Operation on this camera)
Set the camera to the recording mode.
.
REC
≪PLAY
MENU
0
The top menu appears.
2
Tap the “Wi-Fi” (Q) icon.
(Operation on this camera)
.
OFF
SETUP
TOP MENU
Wi-Fi
SETTING
RECORD
SETTINGS
CONNECTION
Using Wi-Fi
96
3
Tap the “DIRECT CONNECTION” (N) icon in the “Wi-Fi” menu.
(Operation on this camera)
.
Wi-Fi
Wi-Fi SETTING
ACCESS POINT
CONNECTION
CONNECTION
DIRECT
0
When
“50p” is selected for “SYSTEM SELECT”, the following display
appears and recording mode is switched to the 50i mode.
.
WHEN USING Wi-Fi
VIDEO RECORDING AT 50i
DIRECT CONNECTION
4
Tap “WPS”.
(Operation on this camera)
.
WPS
PASS:********************************
SSID:********************************
DIRECT CONNECTION
CONNECTING DEVICE
SET UP Wi-Fi SETTING ON
OK
5
Activate WPS on the smartphone within 2 minutes.
(Operation on the smartphone)
.
0
To
activate WPS, refer to the instruction manual of the device in use.
6
A connection is established and Q appears on the camera’s screen.
.
REC
0:00:00 [2:04]
0:00:00 [2:04]
STOP
DIRECT MONITORING
o
Connection by generating a QR code
For details, refer to “DIRECT MONITORING” (A p. 133) .
Handling information:
The information you have entered is used to generate the QR code.
The information is erased after the QR code is generated, and will not be
retained on the web server.
The QR code generated includes your information so please handle with
care.
Using Wi-Fi
97
Monitoring Images from Smartphone
o
Smartphone (Android / iPhone)
Memo :
0
Prior to use this function, a smartphone application needs to be installed
on the smartphone.
“Installing Smartphone Applications” (A p. 114)
1
Start “Everio sync. 3” on the smartphone after setting DIRECT
CONNECTION.
.
2
Tap “DIRECT MONITORING”.
.
3
The recording screen is displayed.
.
0
How to operate from a smartphone
“Using Smartphone Applications” (A p. 114)
Using Wi-Fi
98
Recording the Location Information
You can record the location information of the venue where recording is
taking place via direct connection (Wi-Fi Direct) with a smartphone.
.
GPS
Memo :
0
To obtain the location information, it is necessary to connect the
smartphone to the camera and start the smartphone application.
Also,
setting the “LOC INFO TRANS INT” for the smartphone application
is necessary.
“Smartphone Application Settings” (A p. 124)
0
Activate the GPS function of the smartphone in advance.
0
The recorded location information can be used on the software provided
with this unit.
What You Need
0
Smartphone
Settings Required in Advance
Set up your camera and smartphone by performing the following operations.
For a smartphone with WPS support, refer to the “Wi-Fi Protected Setup
(WPS)”.
*WPS
is a method to connect the camera and the smartphone wirelessly by
easy button operations.
o
Connection by entering the Wi-Fi password
1
Tap “MENU”.
(Operation on this camera)
Set the camera to the recording mode.
.
REC
≪PLAY
MENU
0
The top menu appears.
2
Tap the “Wi-Fi” (Q) icon.
(Operation on this camera)
.
OFF
SETUP
TOP MENU
Wi-Fi
SETTING
RECORD
SETTINGS
CONNECTION
3
Tap the “DIRECT CONNECTION” (N) icon in the “Wi-Fi” menu.
(Operation on this camera)
.
Wi-Fi
Wi-Fi SETTING
ACCESS POINT
CONNECTION
CONNECTION
DIRECT
0
When
“50p” is selected for “SYSTEM SELECT”, the following display
appears and recording mode is switched to the 50i mode.
.
WHEN USING Wi-Fi
VIDEO RECORDING AT 50i
DIRECT CONNECTION
4
Check the SSID and the PASS being displayed on the screen of the
camera.
.
WPS
PASS:********************************
SSID:********************************
DIRECT CONNECTION
CONNECTING DEVICE
SET UP Wi-Fi SETTING ON
OK
5
Select
the SSID in step 4 from the Wi-Fi network selection screen of your
smartphone, and enter the PASS on the password screen.
(Operation on the smartphone)
.
0
For
details on connecting your smartphone to a Wi-Fi network, please
refer to the instruction manual of the device in use.
6
A connection is established and Q appears on the camera’s screen.
.
REC
0:00:00 [2:04]
0:00:00 [2:04]
STOP
DIRECT MONITORING
Using Wi-Fi
99
o
Connection by Wi-Fi Protected Setup (WPS)
1
Tap “MENU”.
(Operation on this camera)
Set the camera to the recording mode.
.
REC
≪PLAY
MENU
0
The top menu appears.
2
Tap the “Wi-Fi” (Q) icon.
(Operation on this camera)
.
OFF
SETUP
TOP MENU
Wi-Fi
SETTING
RECORD
SETTINGS
CONNECTION
3
Tap the “DIRECT CONNECTION” (N) icon in the “Wi-Fi” menu.
(Operation on this camera)
.
Wi-Fi
Wi-Fi SETTING
ACCESS POINT
CONNECTION
CONNECTION
DIRECT
0
When
“50p” is selected for “SYSTEM SELECT”, the following display
appears and recording mode is switched to the 50i mode.
.
WHEN USING Wi-Fi
VIDEO RECORDING AT 50i
DIRECT CONNECTION
4
Tap “WPS”.
(Operation on this camera)
.
WPS
PASS:********************************
SSID:********************************
DIRECT CONNECTION
CONNECTING DEVICE
SET UP Wi-Fi SETTING ON
OK
5
Activate WPS on the smartphone within 2 minutes.
(Operation on the smartphone)
.
0
To
activate WPS, refer to the instruction manual of the device in use.
6
A connection is established and Q appears on the camera’s screen.
.
REC
0:00:00 [2:04]
0:00:00 [2:04]
STOP
DIRECT MONITORING
Operation Method
1
Activate the GPS function of the smartphone.
(Operation on the smartphone)
.
0
For details on using the smartphone, refer to the instruction manual
of the device in use.
2
Start “Everio sync. 3” on the smartphone.
.
Using Wi-Fi
100
3
Tap “DIRECT MONITORING”.
.
4
Monitor screen is displayed.
.
0
To
change the time interval for obtaining the GPS location information
(OFF-15 sec.), tap Q.
“Smartphone Application Settings” (A p. 124)
5
Receiving the location information
(Display on this camera)
.
0:00:00 [2:04]
0:00:00 [2:04]
REC
STOP
DIRECT MONITORING
0
When
the GPS location information is received from the smartphone,
an icon (Z) is displayed on the camera screen.
6
Start recording.
(Operation on this camera)
.
0
Press the “START/STOP” button to start a normal recording.
Memo :
0
Manual recording cannot be performed.
0
It is not possible to switch to the playback mode.
Using Wi-Fi
101
Image Monitoring via an Access Point at
Home (INDOOR MONITORING)
Connect the camera and smartphone wirelessly via access point (wireless
LAN router) that has been set up at home.
You can monitor the images captured on the camera from the smartphone
connected.
0
Recording
of videos and still images may be performed while monitoring.
.
Caution :
0
This function is not designed for disaster or crime prevention.
0
To
prevent the situation of forgetting to turn off the power, this unit will turn
off automatically after 10 days of continuous usage.
0
When not monitoring from a smartphone, the focus of the camera is fixed.
0
Even when monitoring from a smartphone, the focus of the camera will be
fixed if not operated for more than 3 hours. (Focus works again when the
camera is operated.)
What You Need
0
Smartphone
0
Access Point (Wireless LAN Router)
Use a product that has a Wi-Fi certification logo.
Memo :
0
Depending on the access point (wireless LAN router) in use and signal
strength,
you may experience connection problems or slow connections.
Operation Method
Connect the camera to the access point (wireless LAN router)
.
Connect the camera to the access point by either of the following methods.
o
Wi-Fi Protected Setup (WPS) Registration
Follow
the operations below if the access point (wireless LAN router) in use
supports WPS.
1
Tap “MENU”.
(Operation on this camera)
.
REC
≪PLAY
MENU
0
The top menu appears.
2
Tap the “Wi-Fi” (Q) icon.
(Operation on this camera)
.
OFF
SETUP
TOP MENU
Wi-Fi
SETTING
RECORD
SETTINGS
CONNECTION
3
Tap “Wi-Fi SETTING”.
(Operation on this camera)
.
Wi-Fi
Wi-Fi SETTING
ACCESS POINT
CONNECTION
CONNECTION
DIRECT
4
Tap “ACCESS POINTS”.
(Operation on this camera)
.
ACCESS POINTS
Wi-Fi SETTING
Using Wi-Fi
102
5
Tap “ADD”.
(Operation on this camera)
.
ADD
ACCESS POINTS
SET
6
Tap “EZ REGISTRATION WPS”.
(Operation on this camera)
.
EZ REGISTRATION WPS
ADD
7
Activate
WPS of the access point (wireless LAN router) within 2 minutes.
0
To activate WPS, refer to the instruction manual of the device in use.
8
After registration is complete, tap “OK” on the camera’s screen.
(Operation on this camera)
.
OK
WPS
WPA2
ENCRYPTION METHOD
SSID:********************************
REGISTERED
9
Select the access point, then tap “SET”.
.
ADD
ACCESS POINTS
SET
0
If
several access points are registered, tap on the access point to be
used, then tap “USE”.
0
To delete the access point registered, tap on the access point, then
tap “DELETE”.
0
The following registration methods are also available.
“Registering Access Point Using WPS PIN” (A p. 111)
“Registering Access Point Manually” (A p. 143)
Connecting Smartphone to Access Point (Wireless LAN
Router)
.
0
Connect the smartphone to the access point (wireless LAN router) at
home.
0
For
details on how to connect, refer to the instruction manual of the device
in use or the access point (wireless LAN router).
0
This setting is not required if the smartphone has already been connected
to the access point (wireless LAN router) at home.
Monitoring the images by connecting the smartphone and the
camera
.
0
Install “Everio sync. 3” on the smartphone in advance.
“Installing Smartphone Applications” (A p. 114)
o
Operation on this camera
1
Tap “MENU”.
(Operation on this camera)
.
REC
≪PLAY
MENU
0
The top menu appears.
2
Tap the “Wi-Fi” (Q) icon.
(Operation on this camera)
.
OFF
SETUP
TOP MENU
Wi-Fi
SETTING
RECORD
SETTINGS
CONNECTION
3
Tap “ACCESS POINT CONNECTION”.
(Operation on this camera)
.
Wi-Fi
Wi-Fi SETTING
ACCESS POINT
CONNECTION
CONNECTION
DIRECT
Using Wi-Fi
103
4
The
following is displayed when the camera is connected to the access
point.
.
REC
0:00:00 [2:04]
0:00:00 [2:04]
INFO.
STOP
ACCESS POINT CONNECTION
o
Operation on the smartphone
1
Start “Everio sync. 3” on the smartphone after setting INDOOR
MONITORING.
.
2
Tap “INDOOR MONITORING”.
.
3
Log in with your username and password.
(if authentication cannot be achieved)
.
HTTP AUTHORIZATION
AUTHORIZATION FAILED
CHECK USER NAME AND PASSWORD
USERNAME
PASSWORD
CANCELOK
0
The username is “everio” and the default password is “0000”.
0
To change the password, it is necessary to generate a QR code.
“Creating a QR Code” (A p. 136)
4
The recording screen is displayed.
.
0
How to operate from a smartphone
“Using Smartphone Applications” (A p. 114)
Using Wi-Fi
104
Image Monitoring via the Internet
(OUTDOOR MONITORING)
You can check the image on the camera via internet connection with a
smartphone (or computer).
*
To use this function, it is necessary to prepare for an UPnP (Universal Plug
and Play) compatible wireless LAN router, and an internet connection from
which the global IP address can be obtained.
0
Recording of videos and still images may be performed while monitoring.
.
Setting Multiple Cameras in the Same Network:
.
0
To
set up multiple cameras, you need to fix the HTTP ports for each of the
cameras.
What You Need
0
Smartphone or Windows computer
0
Wireless LAN router that supports UPnP (use a product that has a Wi-Fi
certification logo)
To
check whether UPnP is supported, please refer to the instruction manual
of the wireless LAN router in use.
0
Internet connection with an obtainable global IP address
* Global IP address is an IP address that is specific in all over the internet.
For more information, contact your internet service provider.
Memo :
0
Depending
on the wireless LAN router in use and signal strength, you may
experience connection problems or slow connections.
0
When zooming is operated by using the smartphone or computer, it may
take longer for responses as compared to the manual operations.
o
Setting (Once setting is done, start from the “Operation
Method” below)
Obtaining a Dynamic DNS (DDNS) Account
By obtaining a dynamic DNS account, this unit may be used on the web as
usual
even if the IP address changes when making an access to this unit via
internet.
0
Only the JVC dynamic DNS service can be set on this camera.
To obtain (register) an account, perform the following steps.
1
Access the following URL from a browser and register for an account.
(Operation on a computer or smartphone)
https://dd3.jvckenwood.com/user/
Set your e-mail address as the username.
2
Check that you have received a confirmation e-mail to the address used
in registration, and access the URL stated in the e-mail.
(Operation on a computer or smartphone)
3
Set the username and password used in registration on the camera.
(Operation on this camera)
Generate the QR code, and register the username and password to the
camera.
4
Execute OUTDOOR MONITORING.
(Operation on this camera)
If “OUTDOOR MONITORING” is executed while dynamic DNS settings
are enabled, the camera will access the dynamic DNS server.
5
Tap “CAMERA NETWORK INFO.” to check that the URL (WAN) is
displayed.
(Registration complete)
Caution :
0
Registration
will be canceled if you do not access the dynamic DNS server
from the camera within 3 days.
Perform the registration again in this case.
0
Registration will not be complete if the username and password set on this
camera are incorrect. Be sure to check that they are correct.
0
Successful registration will be canceled too if you do not access the
dynamic DNS server for 1 year.
Creating a QR Code
o
Enter values in the required items for outdoor monitoring.
For details, refer to “OUTDOOR MONITORING” (A p. 139
) .
Registering the access points (wireless LAN router) to this
unit
o
Wi-Fi Protected Setup (WPS) Registration
1
Tap “MENU”.
(Operation on this camera)
.
REC
≪PLAY
MENU
0
The top menu appears.
2
Tap the “Wi-Fi” (Q) icon.
(Operation on this camera)
.
OFF
SETUP
TOP MENU
Wi-Fi
SETTING
RECORD
SETTINGS
CONNECTION
3
Tap “Wi-Fi SETTING”.
(Operation on this camera)
.
Wi-Fi
Wi-Fi SETTING
ACCESS POINT
CONNECTION
CONNECTION
DIRECT
4
Tap “ACCESS POINTS”.
(Operation on this camera)
.
ACCESS POINTS
Wi-Fi SETTING
Using Wi-Fi
105
5
Tap “ADD”.
(Operation on this camera)
.
ADD
ACCESS POINTS
SET
6
Tap “EZ REGISTRATION WPS”.
(Operation on this camera)
.
EZ REGISTRATION WPS
ADD
7
Activate
WPS of the access point (wireless LAN router) within 2 minutes.
0
To activate WPS, refer to the instruction manual of the device in use.
8
After registration is complete, tap “OK” on the camera’s screen.
(Operation on this camera)
.
OK
WPS
WPA2
ENCRYPTION METHOD
SSID:********************************
REGISTERED
0
The following registration methods are also available.
“Registering Access Point Using WPS PIN” (A p. 111
)
“Registering Access Point Manually” (A p. 143)
o
Operation Method
Connecting the Camera to the Smartphone
1
Tap “MENU”.
(Operation on this camera)
.
REC
≪PLAY
MENU
0
The top menu appears.
2
Tap the “Wi-Fi” (Q) icon.
(Operation on this camera)
.
OFF
SETUP
TOP MENU
Wi-Fi
SETTING
RECORD
SETTINGS
CONNECTION
3
Tap “ACCESS POINT CONNECTION”.
(Operation on this camera)
.
Wi-Fi
Wi-Fi SETTING
ACCESS POINT
CONNECTION
CONNECTION
DIRECT
4
The
following is displayed when the camera is connected to the access
point.
.
REC
0:00:00 [2:04]
0:00:00 [2:04]
INFO.
STOP
ACCESS POINT CONNECTION
0
Tapping “INFO.” displays the URL (WAN) for connecting the
smartphone.
(Does not appear if DDNS is not set or set incorrectly.)
0
“LUPnP” is displayed when UPnP cannot be used.
Using Wi-Fi
106
o
Operation on the smartphone
Memo :
0
Prior to use this function, a smartphone application needs to be installed
on the smartphone.
“Installing Smartphone Applications” (A p. 114)
1
Start “Everio sync. 3” on the smartphone after setting OUTDOOR
MONITORING.
.
0
Tap “START” in OUTDOOR MONITORING on the camera to start.
2
Tap “OUTDOOR MONITORING”.
.
3
Set the URL.
.
0
It
is necessary to set the URL when you are using this feature for the
first time. Enter the URL displayed on the camera.
0
If this screen is displayed after the URL has been set, check the
connection status of the internet or the camera settings.
4
Log in with your username and password.
(if authentication cannot be achieved)
.
HTTP AUTHORIZATION
AUTHORIZATION FAILED
CHECK USER NAME AND PASSWORD
USERNAME
PASSWORD
CANCELOK
0
The username is “everio” and the default password is “0000”.
0
To change the password, it is necessary to generate a QR code.
“Creating a QR Code” (A p. 139)
5
The recording screen is displayed.
.
Using Wi-Fi
107
6
Operate from a smartphone
.
0
How to operate from a smartphone
“Using Smartphone Applications” (A p. 114)
Using Wi-Fi
108
Changing the Settings
To use the Wi-Fi function, it may be necessary to perform some settings on the camera and smartphone.
Menu Settings
SettingDetails
Wi-Fi SETTINGConfigures various settings related to the network.
0
SET FROM QR CODE
Perform the Wi-Fi setting after the camera reads the QR code generated by following the instruction in
Detailed User Guide.
“Using Wi-Fi by Creating a QR Code” (A p. 132
)
0
ACCESS POINTS
Adds or deletes an access point (wireless LAN router).
“Registering Access Point Using Wi-Fi Protected Setup (WPS)” (A p. 110)
“Registering Access Point Using WPS PIN” (A p. 111)
0
MAC ADDRESS (Media Access Control address)
Displays the MAC address of the camera.
(The above shows the MAC address when connected to an access point, while the below shows the
address during direct connection.)
“Checking the MAC Address of this Camera” (A p. 112)
0
Wi-Fi WITH LCD CLOSED
This unit does not turn off while it is connected to Wi-Fi even when the LCD monitor is closed.
“Configuring Wi-Fi Connection with LCD Monitor Closed” (A p. 112)
0
INITIALIZATION
Returns the network settings to their default values.
“Initializing the Wi-Fi Settings” (A p. 113)
o
To register an access point manually, it is necessary to perform the QR code setting.
“Registering Access Point Manually” (A p. 143)
Using Wi-Fi
109
Registering Access Point Using Wi-Fi Protected Setup (WPS)
Follow the operations below if the access point (wireless LAN router) in use
supports WPS.
1
Tap “MENU”.
(Operation on this camera)
.
REC
≪PLAY
MENU
0
The top menu appears.
2
Tap the “Wi-Fi” (Q) icon.
(Operation on this camera)
.
OFF
SETUP
TOP MENU
Wi-Fi
SETTING
RECORD
SETTINGS
CONNECTION
3
Tap “Wi-Fi SETTING”.
(Operation on this camera)
.
Wi-Fi
Wi-Fi SETTING
ACCESS POINT
CONNECTION
CONNECTION
DIRECT
4
Tap “ACCESS POINTS”.
(Operation on this camera)
.
ACCESS POINTS
Wi-Fi SETTING
5
Tap “ADD”.
(Operation on this camera)
.
ADD
ACCESS POINTS
SET
6
Tap “EZ REGISTRATION WPS”.
(Operation on this camera)
.
EZ REGISTRATION WPS
ADD
7
Activate
WPS of the access point (wireless LAN router) within 2 minutes.
0
To activate WPS, refer to the instruction manual of the device in use.
8
After registration is complete, tap “OK” on the camera’s screen.
(Operation on this camera)
.
OK
WPS
WPA2
ENCRYPTION METHOD
SSID:********************************
REGISTERED
9
Select the access point, then tap “SET”.
.
ADD
ACCESS POINTS
SET
0
If
several access points are registered, tap on the access point to be
used, then tap “USE”.
0
To delete the access point registered, tap on the access point, then
tap “DELETE”.
Using Wi-Fi
110
Registering Access Point Using WPS PIN
1
Tap “MENU”.
(Operation on this camera)
.
REC
≪PLAY
MENU
0
The top menu appears.
2
Tap the “Wi-Fi” (Q) icon.
(Operation on this camera)
.
OFF
SETUP
TOP MENU
Wi-Fi
SETTING
RECORD
SETTINGS
CONNECTION
3
Tap “Wi-Fi SETTING”.
(Operation on this camera)
.
Wi-Fi
Wi-Fi SETTING
ACCESS POINT
CONNECTION
CONNECTION
DIRECT
4
Tap “ACCESS POINTS”.
(Operation on this camera)
.
ACCESS POINTS
Wi-Fi SETTING
5
Tap “ADD”.
(Operation on this camera)
.
ADD
ACCESS POINTS
SET
6
Tap “WPS PIN”.
(Operation on this camera)
.
WPS PIN
ADD
0
The PIN code appears.
7
Enter the PIN code displayed on the camera to the access point
(wireless LAN router).
0
For details on how to enter the PIN code, refer to the instruction
manual of the device in use.
8
Tap “START”.
(Operation on this camera)
.
QUIT
THEN TOUCH "START"
TO ACCESS POINT
ENTER THIS NUMBER
PIN:********
WPS PIN
START
0
Tap “START” after entering PIN code to the access point (wireless
LAN router).
(Connection cannot be established if “START” is tapped before
entering the code.)
9
After registration is complete, tap “OK” on the camera’s screen.
(Operation on this camera)
.
OK
WPS
WPA2
ENCRYPTION METHOD
SSID:********************************
REGISTERED
10
Select the access point, then tap “SET”.
.
ADD
ACCESS POINTS
SET
0
If
several access points are registered, tap on the access point to be
used, then tap “USE”.
0
To delete the access point registered, tap on the access point, then
tap “DELETE”.
Using Wi-Fi
111
Checking the MAC Address of this Camera
Displays the MAC address of the camera.
1
Tap “MENU”.
(Operation on this camera)
.
REC
≪PLAY
MENU
0
The top menu appears.
2
Tap the “Wi-Fi” (Q) icon.
(Operation on this camera)
.
OFF
SETUP
TOP MENU
Wi-Fi
SETTING
RECORD
SETTINGS
CONNECTION
3
Tap “Wi-Fi SETTING”.
(Operation on this camera)
.
Wi-Fi
Wi-Fi SETTING
ACCESS POINT
CONNECTION
CONNECTION
DIRECT
4
Tap “MAC ADDRESS”.
(Operation on this camera)
.
MAC ADDRESS
Wi-Fi SETTING
0
The MAC address of the camera appears.
(The above shows the address during direct connection, while the
below
shows the MAC address when connected to an access point.)
0
After checking, tap “SET”.
Configuring Wi-Fi Connection with LCD Monitor Closed
You can configure this unit to remain turned on while it is connected to Wi-
Fi even when the LCD monitor is closed.
1
Tap “MENU”.
(Operation on this camera)
.
REC
≪PLAY
MENU
0
The top menu appears.
2
Tap the “Wi-Fi” (Q) icon.
(Operation on this camera)
.
OFF
SETUP
TOP MENU
Wi-Fi
SETTING
RECORD
SETTINGS
CONNECTION
3
Tap “Wi-Fi SETTING”.
(Operation on this camera)
.
Wi-Fi
Wi-Fi SETTING
ACCESS POINT
CONNECTION
CONNECTION
DIRECT
4
Tap “Wi-Fi WITH LCD CLOSED”.
(Operation on this camera)
.
Wi-Fi SETTING
Wi-Fi WITH LCD CLOSED
Using Wi-Fi
112
5
Tap “ON”.
.
Wi-Fi WITH LCD CLOSED
MONITOR IS CLOSED
MAINTAINED EVEN WHEN LCD
Wi-Fi CONNECTION WILL BE
ONOFF
6
Tap “OK”.
.
Wi-Fi WITH LCD CLOSED
THEN CLOSE LCD MONITOR
DISCONNECT Wi-Fi AND
TO TURN CAMERA OFF,
SETTINGS COMPLETED
OK
Memo :
0
To
turn off the power, turn off the Wi-Fi connection or set “Wi-Fi WITH LCD
CLOSED” to “OFF” then close the LCD monitor.
Initializing the Wi-Fi Settings
Returns the Wi-Fi settings to their default values.
1
Tap “MENU”.
(Operation on this camera)
.
REC
≪PLAY
MENU
0
The top menu appears.
2
Tap the “Wi-Fi” (Q) icon.
(Operation on this camera)
.
OFF
SETUP
TOP MENU
Wi-Fi
SETTING
RECORD
SETTINGS
CONNECTION
3
Tap “Wi-Fi SETTING”.
(Operation on this camera)
.
Wi-Fi
Wi-Fi SETTING
ACCESS POINT
CONNECTION
CONNECTION
DIRECT
4
Tap “INITIALIZATION”.
(Operation on this camera)
.
INITIALIZATION
Wi-Fi SETTING
5
Tap “YES”.
(Operation on this camera)
.
NOYES
RESET TO THE FACTORY PRESET?
DO YOU WANT THE SETTINGS
INITIALIZATION
0
To cancel, tap “NO”.
0
When “YES” is tapped, the network settings return to their default
values.
Using Wi-Fi
113
Using Smartphone Applications
0
By installing the “Everio sync. 3” smartphone software, images on the
camera
can be checked from a distance, and recording videos/still images
and zooming operation can be performed.
0
You can also send images recorded by the camera to the smartphone via
Wi-Fi, to enjoy the recorded images on your smartphone or tablet.
Installing Smartphone Applications
.
o
Android Smartphone
1
Tap “PLAY STORE” on the application list.
2
Search for the “Everio sync. 3” application.
3
Tap on the “Everio sync. 3” application.
0
The detailed information of the application is displayed.
4
Tap “INSTALL”.
0
For applications that access data or functions of this unit, a screen
that shows the data or functions that will be used is displayed.
5
Confirm the content and tap “DOWNLOAD”.
0
Downloading starts.
Deleting the Application
A
Tap “PLAY STORE” on the application list.
B
Press the menu button and tap “My apps”.
0
A list of previously downloaded applications is displayed.
C
Tap on the “Everio sync. 3” application.
D
Tap “Uninstall”, then tap “OK”.
Memo :
The specifications of Google Play are subject to changes without prior
notice.
For operating details, refer to the help file of Google Play.
o
iPhone/iPad/iPod touch
1
Tap “App Store” on the home screen.
2
Search for the “Everio sync. 3” application.
3
Tap on the “Everio sync. 3” application.
0
The detailed information of the application is displayed.
4
Tap “FREE”F“INSTALL”.
0
Enter your password on the password entry screen.
0
Downloading starts.
0
The downloaded application will be added to the home screen
automatically.
Deleting the Application
A
Press and hold the “Wireless sync.” application on the home screen.
B
Tap L to confirm the deletion.
Memo :
The specifications of App Store™ are subject to changes without prior
notice.
For operating details, refer to the help file of App Store™.
Operating the Smartphone Applications
0
Indications on the screen
“Indications on the screen” (A p. 114)
0
Transferring videos
“Transferring Videos (AVCHD Format)” (A p. 120)
0
Transferring still images
“Transferring Still Images” (A p. 122)
0
Changing the settings
“Smartphone Application Settings” (A p. 124)
Indications on the screen
o
Initial Screen
.
To Help Screen
Connect via
internet
Connect via access
point
Connect to the
camera directly
To Settings Screen
o
Recording Screen
.
Video Recording Format
(AVCHD)
To Game Score Screen
To Marking Screen
Still Image Recording
Button
Video Recording Stop
Button
Video Recording Start
Button
Zoom Button
Enable/Disable Location
Information
Light Button
Recording in Progress
Record-Standby
To Settings Screen
To Index Screen
o
Index Screen (AVCHD Video/Still image)
.
Video recording format
Recording
Date/TimePlayback Time
Thumbnail
To Settings Screen
To Monitor Screen
Using Wi-Fi
114
o
Transfer Screen (AVCHD Screen)
.
To Transfer Screen
Check to Select All
Checkbox
o
Game Score Screen
.
Monitor button
Mark button
Cancel button
Goal button
Score sheet
Recording Stop button
Game Over button
Recording Start button
Game Start button
Free-Text Display
Caution :
0
“Everio
sync. 3” for iPhone/iPad cannot be used when the iPhone/iPad is
connected to the mobile phone network. To make use of this feature,
connect to the camera or an access point via Wi-Fi.
Using the Markings
Enter the mark in the desired scene to make it easy to find the scene later.
*
Establish a Wi-Fi connection by using the DIRECT MONITORING function.
o
Common for Android and iOS
1
Tap c to start recording the video.
.
2
Tap the “Marking” button at the scene you want to mark.
.
Using Wi-Fi
115
3
The marking screen appears.
.
0
Once a scene is marked, the next mark won’t be made within 5
seconds.
0
Tap “Monitor” to return to the monitor screen.
Using the Game Score
The scores of various sport games can be recorded with video images.
Also,
the recorded position can be marked to make it easy to find the scenes
you want to view later.
* Establish a Wi-Fi connection by using the DIRECT MONITORING function.
o
Common for Android and iOS
1
Tap “Game Score”.
.
2
Tap the scorecard.
.
Using Wi-Fi
116
3
Tap “MODIFY SCOREBOARD”.
.
(for All-Purpose Scoreboard)
0
Tap “TEAM SELECTION” to select the team.
0
Tap “TEAM LIST” to add the team name, team color and players.
0
Tap “Game Name” to set the name of the game.
(for Tennis Scoreboard)
0
Tap “PLAYER SELECTION” to select player(s).
0
Tap “PLAYER LIST” to add player(s).
0
Tap “GAME RULES” to change the game rules.
4
Tap the scoreboard to use.
.
0
The following 3 types of scoreboard are available. Select a suitable
scoreboard for the sport game you are recording.
ItemDetails
AP (WITH SET COUNT)Table tennis, volleyball, etc
AP (NO SET COUNT)Football, baseball, basketball, etc
TENNISTennis
5
Tap c to start recording the video.
.
6
When the game is started, tap “Game Start”.
.
Using Wi-Fi
117
7
Tap the number when the score is added.
.
0
To modify the score, tap the scorecard. (“ALL-PURPOSE
SCOREBOARD” only)
“Modifying Game Score Directly” (A p. 119)
0
Tap the “Undo” button to cancel the latest score entry.
0
When the score is registered, next entry cannot be made for 5
seconds.
8
Mark the favorite scenes by tapping “Marking”.
.
0
Once a scene is marked, the next mark won’t be made within 5
seconds.
9
When the game is ended, tap “Game End”.
.
0
Check “STOP RECORDING” to stop video recording at the game
end.
0
Tap “Monitor” to return to the monitor screen in Step 1.
Memo :
0
The score button can be selected for the “AP (NO SET COUNT)”
scoreboard, depending on the type of the games.
0
The next score won’t be registered within 5 seconds after the marking
operation.
But the score can be registered right after the marking operation
by changing the game score setting.
“Game Score Settings” (A p. 125)
Using Wi-Fi
118
o
Modifying Game Score Directly
You
can modify the game score directly. (“ALL-PURPOSE SCOREBOARD”
only)
1
Tap the scorecard.
.
2
Tap “SCORE EDITING”.
.
3
Enter the score, then tap “SAVE”.
.
Using Wi-Fi
119
Transferring Videos (AVCHD Format)
Transfer videos recorded in AVCHD format to the smartphone.
0
The video to be forwarded is converted to the following format.
ItemDetails
SystemMP4
VideoCodecH. 264/MPEG-4 AVC Baseline
Profile
Resolution
* Bit rate is indicated in ( )
1280X720 (3.6Mbps)
640X360 (1Mbps)
Frame rate25p
AudioCoding systemAAC
Sampling rate48kHz
Bit16 bit
Number of channels2 ch
1
Start “Everio sync. 3” on the smartphone.
.
0
Start the application after confirming that the smartphone is
connected to this camera.
2
Select the connection type to the camera.
.
0
Tap the current connection type.
0
Recording screen appears.
3
Tap “Index”.
.
4
In the index screen, tap the desired images to transfer.
.
0
Confirm that the “AVCHD” tab is indicated in the lower part of the
screen.
Using Wi-Fi
120
5
Files are displayed as a split files by certain lengths of time. Enter the
check
mark (A) to the files to transfer, and tap the transfer mark icon (B)
on the lower right.
.
0
Number
of the selected image files is indicated next to the check mark
in lower left.
0
To set the length of video you are transferring, refer to the below
instructions.
“Smartphone Application Settings” (A p. 124)
6
Tap “TRANSFER”.
.
0
Tap “CANCEL” to cancel the operation.
7
“TRANSFER” starts.
.
0
Tap “CANCEL” to cancel the operation.
8
After transferring is complete, tap “OK”.
.
0
To play back and check the video, tap “CHECK”. (Android only)
(unavailable when multiple videos are transferred)
0
To
upload the video, tap “SHARE”. (Android only) (unavailable when
multiple videos are transferred)
Tap the desired service, then proceed to the uploading process.
To make use of a service, it is necessary to perform registration
beforehand.
Using Wi-Fi
121
o
Transferring manually
You can set the length of transferred video.
A
Tap “MANUAL” in step 5.
B
At the start point, enter the starting time of the video.
Specify
the lengths of the video by using the slider bar. (10 to 300 sec)
C
After confirming the setting, tap “TRANSFER”, and then tap
“TRANSFER” one more time.
.
Length of the trans-
ferred video
Start point of the
video transfer
0
Length of the transferred video can be adjusted by using the slider bar.
0
The longer the length of the transferred video is set, the longer it takes to
transfer the video.
Transferring Still Images
You can transfer recorded still images to your smartphone.
If the aspect ratio of the original still image is 4:3, the image is reduced by
1600X1200 when transferred.
If the aspect ratio of the original still image is 16:9, the image is reduced by
1920X1080 when transferred.
1
Start “Everio sync. 3” on the smartphone.
.
0
Start the application after confirming that the smartphone is
connected to this camera.
2
Select the connection type to the camera.
.
0
Tap the current connection type.
0
Recording screen appears.
Using Wi-Fi
122
3
Tap “Index”.
.
4
Select the “Still Image” tab in the lower part of the screen, and tap the
index screen.
.
0
Tap “Monitor” to return to the monitor screen.
0
Tap Q to move to the setting screen.
5
Enter the check in the checkbox (A) to the still images to transfer, and
tap the transfer mark icon (B) on the lower right.
.
0
Tap “BACK” to return to the previous screen.
6
Tap “TRANSFER”.
.
0
Tap “CANCEL” to cancel the operation.
Using Wi-Fi
123
7
“TRANSFER” starts.
.
0
Tap “CANCEL” to cancel the operation.
8
After transferring is complete, tap “OK”.
.
0
To
play back and check the still image, tap “CHECK”. (Android only)
(unavailable when multiple still images are transferred)
0
To upload the still image, tap “SHARE”. (Android only) (unavailable
when multiple still images are transferred)
Tap the desired service, then proceed to the uploading process.
To make use of a service, it is necessary to perform registration
beforehand.
Smartphone Application Settings
You can change the settings of the smartphone applications.
o
Common for Android and iOS
1
Tap Q.
.
2
Tap the desired setting.
.
Using Wi-Fi
124
ItemDetails
MONITORINGTurns on/off the monitoring function of the
screen. (Enter a check mark to set to “ON”)
LOC INFO TRANS INTSelect the time interval for obtaining the GPS
location
information while the direct monitoring
is in use. (Off - 15 SEC)
LENGTHSet the length of video being transferred to the
smartphone. (10 - 300SEC)
RESOLUTION (pixel)Select the resolution of the video being
transferred
to the smartphone. (“1280×720” or
“640×360”)
GAME SCORE
SETTING
Enter the recording methods of the game
score, as well as the team information.
“Game Score Settings” (A p. 125
)
URLEnter the URL of the camera that is connected
to the smartphone via wireless network.
HTTP
AUTHORIZATION
Set the user name and the password for
INDOOR MONITORING/OUTDOOR
MONITORING.
The
default username is “everio” (fixed) and the
password is “0000”.
(can be changed from camera)
Set the user name and the password for
INDOOR MONITORING/OUTDOOR
MONITORING.
The default username is “jvccam” (fixed) and
the password is “0000”.
(can be changed from camera)
NOT TO SLEEP MODESet to prevent the smartphone from entering
into the sleep mode while the application is in
use.
(Enter a check mark to disactivate the sleep
mode.)
HELPDisplays the help file.
LICENSE
AGREEMENT
Displays the license agreement of the
software. (Android only)
Memo :
0
When
connecting to INDOOR MONITORING/OUTDOOR MONITORING,
you will be prompted to enter the URL or HTTP authorization if they are
not entered or entered incorrectly.
Game Score Settings
Enter the recording methods of the game score, as well as the team
information.
o
Common for Android and iOS
1
Tap Q.
.
2
Tap “GAME SCORE SETTING”.
.
Using Wi-Fi
125
3
Tap the desired setting.
.
ItemDetails
ALL-PURPOSE
SCOREBOARD
0
Set “TEAM LIST” which uses “ALL-PURPOSE
SCOREBOARD”.
0
Set “SCORE BUTTON SETTING” for “AP (NO SET
COUNT)”.
TENNIS
SCOREBOARD
Set the game rule of tennis, such as “PLAYER LIST”
and “NUMBER OF SETS”.
CHANGE
BACKGROUND
COLOR
Set the background color of the game score screen.
PRIORITIZE
THE SCORE
The score can be entered within 5 seconds after the
mark operation by selecting the checkbox. However,
the marked position is changed when the score is
registered.
HELPDisplays the help file.
Memo :
0
When the team name and player name are registered, the “\” mark entered
by the smartphone is displayed as “\” (backslash) on this camera.
Using Tablet Applications
By installing a “JVC CAM Coach 2” tablet software, images recorded by the
camera can be transferred to a tablet device via Wi-Fi. Functions such as
playback of the recorded video, displaying 2 different playback images for
comparison,
self-checking and adding explanations on playback images are
available.
Installing the Applications for a Tablet
o
Android Tablet
1
Tap “PLAY STORE” on the application list.
2
Search for the “JVC CAM Coach 2” application.
3
Tap on the “JVC CAM Coach 2” application.
0
Detailed information of the application is displayed.
4
Tap “INSTALL”.
0
For applications that access data or functions of this unit, a screen
that shows the data or functions that will be used is displayed.
5
Confirm the content and tap “DOWNLOAD”.
0
Downloading starts.
o
iPad
1
Tap “App Store” on the home screen.
2
Search for the “JVC CAM Coach 2” application.
3
Tap on the “JVC CAM Coach 2” application.
0
Detailed information of the application is displayed.
4
Tap “FREE”F“INSTALL”.
0
Enter your password on the password entry screen.
0
Downloading starts.
0
The downloaded application will be added to the home screen
automatically.
Memo :
0
For
details on how to use the application, tap K found in the application to
open the help file.
.
Using Wi-Fi
126
Troubleshooting
Direct Monitoring
TroubleAction
Unable to connect to camera.
0
Check whether the Wi-Fi connection is established successfully.
0
Check whether Wi-Fi is connected to “DIRECT-**EVERIO”.
0
Check whether the smartphone is connected to the camera.
0
Try again after powering off and on the camera and the terminal (smartphone).
0
If the smartphone supports Wi-Fi Direct, try generating the QR code and set “ENFORCED GROUP
OWNER” to “OFF”.
This is the “Connection by Wi-Fi Protected Setup (WPS)” method.
Video or audio is interrupted or delayed
0
If
the network speed is slow, videos and audio sound may be interrupted, or delay may become significant.
0
Try to change the place and time to locate an environment with good signal strength.
The unit turns off automatically.
0
To
prevent the situation of forgetting to turn off the power, this unit will turn off automatically after 10 days
of continuous usage.
Unable to set focus.
0
When not monitoring from a smartphone, the focus of the camera is fixed.
0
Even when monitoring from a smartphone, the focus of the camera will be fixed if not operated for more
than 3 hours. (Focus works again when the camera is operated.)
Connection gets disconnected, or a
“UNABLE TO CONNECT” message is
displayed
0
Establish a connection again at a place with good signal strength. Transmission speed may drop, or a
connection may fail if the devices are placed too far away from each other, when there are objects in
between, or when a microwave oven or other wireless devices are in use.
0
If a connection cannot be re-established, restart the terminal (smartphone).
0
You may have difficulty establishing a connection via direct monitoring in an environment where the
camera
is placed away from the smartphone. In this case, connect using the access point (wireless LAN
router).
Access Point (Wireless LAN Router)
TroubleAction
Unable to connect to access point (wireless
LAN router).
0
Check that the password is correct.
0
If
the access point has been registered using the QR code, check that the SSID or authentication method
is correct.
Unsure of which access point (wireless LAN
router) to use.
0
If
the settings of the access point (wireless LAN router) have never been changed from their default values,
check the following.
- Check whether an adhesive label indicating the initial settings is attached to the body of the access point
(wireless LAN router).
- Check for the default settings in the instruction manual of the access point (wireless LAN router).
Unsure of password for the access point
(wireless LAN router).
Refer to the instruction manual of the access point (wireless LAN router) in use.
Unable to connect via Wi-Fi Protected Setup
(WPS).
0
Simple
connection methods other than WPS are not supported. Register an access point using QR code
before making a connection.
0
Turn off the power of the camera, then try again.
Using Wi-Fi
127
INDOOR MONITORING (connection at home)
TroubleAction
Unable to connect to camera.
0
Check whether the Wi-Fi connection is established successfully.
0
Check
to ensure that the camera and the terminal (smartphone) are connected to the same access point.
0
Try again after powering off and on the camera and the terminal (smartphone).
Video or audio is interrupted or delayed
0
If
the network speed is slow, videos and audio sound may be interrupted, or delay may become significant.
0
Try to change the place and time to locate an environment with good signal strength.
The unit turns off automatically.
0
To
prevent the situation of forgetting to turn off the power, this unit will turn off automatically after 10 days
of continuous usage.
Unable to set focus.
0
When not monitoring from a smartphone, the focus of the camera is fixed.
0
Even when monitoring from a smartphone, the focus of the camera will be fixed if not operated for more
than 3 hours. (Focus works again when the camera is operated.)
Connection gets disconnected, or a
“UNABLE TO CONNECT” message is
displayed
0
Establish a connection again at a place with good signal strength. Transmission speed may drop, or a
connection may fail if the devices are placed too far away from each other, when there are objects in
between, or when a microwave oven or other wireless devices are in use.
0
If a connection cannot be re-established, restart the terminal (smartphone).
Screen does not refresh or remains black
0
Check if the camera and the access point are properly connected.
Images cannot be detected on the terminal (smartphone) if the camera is disconnected from the access
point halfway through.
Using Wi-Fi
128
OUTDOOR MONITORING (connection from the Internet)
TroubleAction
The URL (WAN) does not appear in the
network information.
0
The URL (WAN) will not appear if dynamic DNS (DDNS) is not set on the camera.
To set the dynamic DNS (DDNS), perform the following steps.
1. Obtain an account with JVC dynamic DNS (DDNS) service using your computer.
2. Log in to JVC DNS and obtain the dynamic DNS (DDNS) service.
3. Set the username and password for the dynamic DNS (DDNS) obtained on the camera.
* Only the JVC dynamic DNS (DDNS) service can be set on this camera.
0
The URL (WAN) will not appear if dynamic DNS (DDNS) is not set on the camera.
To set the dynamic DNS (DDNS), perform the following steps.
1. Obtain an account with JVC dynamic DNS (DDNS) service using your computer.
https://dd3.jvckenwood.com/user/
2. Log in to JVC DNS and obtain the dynamic DNS (DDNS) service.
3. Set the username and password for the dynamic DNS (DDNS) obtained on the camera.
* Only the JVC dynamic DNS (DDNS) service can be set on this camera.
Unable to access the entered URL. (cannot
be found)
0
If
there are two or more routers (or two or more routing functions) along the route between the camera and
the WAN (global IP address), connection via internet cannot be used.
0
Check that the dynamic DNS username and password are correct.
0
The access point (wireless LAN router) in use is not compatible with UPnP, or UPnP is turned off. Check
the instruction manual of the access point (wireless LAN router) in use, and turn on UPnP.
0
The “UPnP” of the camera is set to “OFF”. (By default, it is set to “ON”.)
Generate a QR code and set “UPnP” to “ON”.
0
Check whether a terminal that uses port 80 (such as web servers) has been set in the network, or if a
specific terminal has been set to use port 80 on the access point (wireless LAN router). In such case,
change the “HTTP Port” to other than 80 and generate a QR code.
0
Try again after powering off and on the camera and the terminal (smartphone).
Video or audio is interrupted or delayed
0
If
the network speed is slow, videos and audio sound may be interrupted, or delay may become significant.
0
Try to change the place and time to locate an environment with good signal strength.
The unit turns off automatically.
0
To
prevent the situation of forgetting to turn off the power, this unit will turn off automatically after 10 days
of continuous usage.
Unable to set focus.
0
When not monitoring from a smartphone, the focus of the camera is fixed.
0
Even when monitoring from a smartphone, the focus of the camera will be fixed if not operated for more
than 3 hours. (Focus works again when the camera is operated.)
Connection gets disconnected, or a
“UNABLE TO CONNECT” message is
displayed
0
Establish a connection again at a place with good signal strength. Transmission speed may drop, or a
connection may fail if the devices are placed too far away from each other, when there are objects in
between, or when a microwave oven or other wireless devices are in use.
0
If a connection cannot be re-established, restart the terminal (smartphone).
Screen does not refresh or remains black
0
Check if the camera and the access point are properly connected.
Images cannot be detected on the terminal (smartphone) if the camera is disconnected from the access
point halfway through.
“LUPnP” is displayed.This appears when UPnP has failed.
0
Check whether the wireless LAN router in use is compatible with UPnP.
(Refer
to the instruction manual of the wireless LAN router in use, or consult the manufacturer of the router.)
0
When the wireless LAN router in use is compatible with UPnP, turn on the UPnP function.
0
If the icon does not disappear even when the UPnP function is enabled, turn off and on the power of the
wireless LAN router in use as well as the camera, then try again.
Unable to connect although “LUPnP” is
displayed.
0
When “UPnP” is set to “OFF”, “LUPnP” will not appear. In such cases, set “UPnP” to “ON”.
0
When the port 80 has been used by other devices via UPnP, a connection cannot be established.
Reconnect the camera.
Using Wi-Fi
129
Vide/Still Image Transmission
TroubleAction
Unable to transfer videos and still images to
smartphone.
0
Check the amount of remaining free space in the destination medium (smartphone).
Using Wi-Fi
130
Wi-Fi Specifications
Wi-Fi Specifications
ItemDetails
Wireless LAN StandardIEEE802.11b/g/n (2.4GHz band)
Wi-Fi securityEncryption: WEP, WPA, WPA2
*WPA and WPA2 are supported only by the personal mode (PSK).
DIRECT MONITORING / INDOOR MONITORING / OUTDOOR MONITORING
o
When Using Everio sync. 3
ItemDetails
Supported TerminalsiPhone/iPod touch: iOS 8.1 or later
Android: Android 4.1 or later
0
There is no guarantee that the operations will work with all terminals.
0
“Everio sync. 3” for iPhone cannot be used when the iPhone is connected to the mobile phone network.
To make use of this feature, connect to the camera or an access point via Wi-Fi.
0
A
network environment with a minimum line speed of about 5.3 Mbps is recommended for both the camera
sending the data and the smartphone terminal receiving the data.
If the network speed is too low, video images may appear jumpy, or audio sound may be interrupted or
delayed.
Monitor ScreenVideo: JPEG 640x360 max. 15 fps
Audio: linear PCM 8kHz 16 bits 1ch
Video TransmissionVideo: MP4-compliant H.264 Baseline Profile 640x360 or 1280x720 30p
Audio: AAC 48kHz 16 bits 2ch
Still Image TransmissionJPEG format
Using Wi-Fi
131
Handling information:
The information you have entered is used to generate the QR code.
The information is erased after the QR code is generated, and will not be
retained on the web server.
The QR code generated includes your information so please handle with
care.
DIRECT MONITORING
You can check the image captured on the camera via direct 1-to-1
connection
(Wi-Fi Direct) with a smartphone, without the need for an access
point (wireless LAN router).
INDOOR MONITORING
You can check the image captured on the camera by connecting a
smartphone via an access point (wireless LAN router).
OUTDOOR MONITORING
You can check the image captured on the camera via internet connection
with a smartphone while you are outside.
Registering Access Point Manually
You can register an access point which does not support WPS.
Using Wi-Fi by Creating a QR Code
132
DIRECT MONITORING
o
Setting (Once setting is done, start from the “Regular
Operation” below)
Creating a QR Code
o
Enter values in the required items for direct monitoring.
0
Password: set a password to connect this camera to the device by direct
monitoring. (8 to 63 characters (64 characters in case of hexadecimal))
0
Enforced
Group Owner: setting used to enable a connection with a device
that does not support Wi-Fi Direct. Normally set to “ON”.
0
HTTP Port: Normally set to “80”.
Display the screen for reading the QR code.
1
Tap “MENU”.
(Operation on this camera)
.
REC
≪PLAY
MENU
0
The top menu appears.
2
Tap the “Wi-Fi” (Q) icon.
(Operation on this camera)
.
OFF
SETUP
TOP MENU
Wi-Fi
SETTING
RECORD
SETTINGS
CONNECTION
3
Tap “Wi-Fi SETTING”.
(Operation on this camera)
.
Wi-Fi
Wi-Fi SETTING
ACCESS POINT
CONNECTION
CONNECTION
DIRECT
4
Tap “SET FROM QR CODE”.
.
SET FROM QR CODE
Wi-Fi SETTING
5
Tap “EXECUTE”.
.
STOPEXECUTE
SMART USER GUIDE
USING WEB USER GUIDE OR
Wi-Fi SETTING CAN BE SET
SET FROM QR CODE
Read a QR code.
1
Read a QR code.
(Operation on this camera)
.
PLEASE READ QR CODE
2
Tap “YES”.
.
NOYES
OVERWRITTEN
PREVIOUS SETTING WILL BE
DIRECT MONITORING
CHANGE THE SETTING OF
SET FROM QR CODE
3
Tap “OK”.
.
NEXT
OK
SETTINGS COMPLETED
SET FROM QR CODE
0
Tap “NEXT” to return to the screen to read the QR code.
0
Set contents are saved.
Using Wi-Fi by Creating a QR Code
133
o
Regular Operation
Connecting the Smartphone to the Camera Wirelessly
o
Connection by entering the Wi-Fi password
1
Tap “MENU”.
(Operation on this camera)
Set the camera to the recording mode.
.
REC
≪PLAY
MENU
0
The top menu appears.
2
Tap the “Wi-Fi” (Q) icon.
(Operation on this camera)
.
OFF
SETUP
TOP MENU
Wi-Fi
SETTING
RECORD
SETTINGS
CONNECTION
3
Tap the “DIRECT CONNECTION” (N) icon in the “Wi-Fi” menu.
(Operation on this camera)
.
Wi-Fi
Wi-Fi SETTING
ACCESS POINT
CONNECTION
CONNECTION
DIRECT
0
When
“50p” is selected for “SYSTEM SELECT”, the following display
appears and recording mode is switched to the 50i mode.
0
This display disappears automatically after approximately 3 seconds,
but disappears immediately if the screen is tapped.
.
WHEN USING Wi-Fi
VIDEO RECORDING AT 50i
DIRECT CONNECTION
4
Check the SSID and the PASS being displayed on the screen of the
camera.
.
WPS
PASS:********************************
SSID:********************************
DIRECT CONNECTION
CONNECTING DEVICE
SET UP Wi-Fi SETTING ON
OK
5
Select
the SSID in step 4 from the Wi-Fi network selection screen of your
smartphone, and enter the PASS on the password screen.
(Operation on the smartphone)
.
0
For
details on connecting your smartphone to a Wi-Fi network, please
refer to the instruction manual of the device in use.
6
A connection is established and Q appears on the camera’s screen.
.
REC
0:00:00 [2:04]
0:00:00 [2:04]
STOP
DIRECT MONITORING
o
Connection by Wi-Fi Protected Setup (WPS)
1
Tap “MENU”.
(Operation on this camera)
Set the camera to the recording mode.
.
REC
≪PLAY
MENU
0
The top menu appears.
2
Tap the “Wi-Fi” (Q) icon.
(Operation on this camera)
.
OFF
SETUP
TOP MENU
Wi-Fi
SETTING
RECORD
SETTINGS
CONNECTION
3
Tap the “DIRECT CONNECTION” (N) icon in the “Wi-Fi” menu.
(Operation on this camera)
.
Wi-Fi
Wi-Fi SETTING
ACCESS POINT
CONNECTION
CONNECTION
DIRECT
0
When
“50p” is selected for “SYSTEM SELECT”, the following display
appears and recording mode is switched to the 50i mode.
0
This display disappears automatically after approximately 3 seconds,
but disappears immediately if the screen is tapped.
Using Wi-Fi by Creating a QR Code
134
.
WHEN USING Wi-Fi
VIDEO RECORDING AT 50i
DIRECT CONNECTION
4
Tap “WPS”.
(Operation on this camera)
.
WPS
PASS:********************************
SSID:********************************
DIRECT CONNECTION
CONNECTING DEVICE
SET UP Wi-Fi SETTING ON
OK
5
Activate WPS on the smartphone within 2 minutes.
(Operation on the smartphone)
.
0
To
activate WPS, refer to the instruction manual of the device in use.
6
A connection is established and Q appears on the camera’s screen.
.
REC
0:00:00 [2:04]
0:00:00 [2:04]
STOP
DIRECT MONITORING
Monitoring Images from Smartphone
o
Smartphone (Android / iPhone)
Memo :
0
Prior to use this function, a smartphone application needs to be installed
on the smartphone.
“Installing Smartphone Applications” (A p. 114)
1
Start “Everio sync. 3” on the smartphone after setting DIRECT
MONITORING.
.
2
Tap “DIRECT MONITORING”.
.
Using Wi-Fi by Creating a QR Code
135
3
The recording screen is displayed.
.
4
Operate from a smartphone
.
0
How to operate from a smartphone
“Using Smartphone Applications” (A p. 114)
INDOOR MONITORING
o
Setting (Once setting is done, start from the “Regular
Operation” below)
Creating a QR Code
o
Enter values in the required items for indoor monitoring.
0
For indoor monitoring, it is not necessary to perform settings other than
the password and HTTP port.
Items other than the above mentioned are used for “OUTDOOR
MONITORING”. When using outdoor monitoring, enter each item and
perform the settings again.
If connection fails, check that the contents entered for each item are
correct, regenerate the QR code and set the camera.
0
Password: set a password to connect this camera to the device via an
access point. (Not more than 8 characters)
0
DDNS: Set the connection environment to the internet. Set to OFF when
outdoor monitoring is not used.
0
User name (DDNS): set an user name for the obtained DDNS account.
0
Password (DDNS): set a password for the obtained DDNS account.
0
UPnP:
Set to “ON” if the UPnP protocol may be used to connect the device
to the network.
0
HTTP Port: Set the port number for connecting to the internet. Normally
set to “80”.
Display the screen for reading the QR code.
1
Tap “MENU”.
(Operation on this camera)
.
REC
≪PLAY
MENU
0
The top menu appears.
2
Tap the “Wi-Fi” (Q) icon.
(Operation on this camera)
.
OFF
SETUP
TOP MENU
Wi-Fi
SETTING
RECORD
SETTINGS
CONNECTION
3
Tap “Wi-Fi SETTING”.
(Operation on this camera)
.
Wi-Fi
Wi-Fi SETTING
ACCESS POINT
CONNECTION
CONNECTION
DIRECT
Using Wi-Fi by Creating a QR Code
136
4
Tap “SET FROM QR CODE”.
.
SET FROM QR CODE
Wi-Fi SETTING
5
Tap “EXECUTE”.
.
STOPEXECUTE
SMART USER GUIDE
USING WEB USER GUIDE OR
Wi-Fi SETTING CAN BE SET
SET FROM QR CODE
Read a QR code.
1
Read a QR code.
(Operation on this camera)
.
PLEASE READ QR CODE
2
Tap “YES”.
.
NOYES
OVERWRITTEN
PREVIOUS SETTING WILL BE
INDOOR MONITORING
CHANGE THE SETTING OF
SET FROM QR CODE
3
Tap “OK”.
.
NEXT
OK
SETTINGS COMPLETED
SET FROM QR CODE
0
Tap “NEXT” to return to the screen to read the QR code.
0
Set contents are saved.
Registering the access points (wireless LAN router) to this
unit
o
Wi-Fi Protected Setup (WPS) Registration
1
Tap “MENU”.
(Operation on this camera)
.
REC
≪PLAY
MENU
0
The top menu appears.
2
Tap the “Wi-Fi” (Q) icon.
(Operation on this camera)
.
OFF
SETUP
TOP MENU
Wi-Fi
SETTING
RECORD
SETTINGS
CONNECTION
3
Tap “Wi-Fi SETTING”.
(Operation on this camera)
.
Wi-Fi
Wi-Fi SETTING
ACCESS POINT
CONNECTION
CONNECTION
DIRECT
4
Tap “ACCESS POINTS”.
(Operation on this camera)
.
ACCESS POINTS
Wi-Fi SETTING
5
Tap “ADD”.
(Operation on this camera)
.
ADD
ACCESS POINTS
SET
Using Wi-Fi by Creating a QR Code
137
6
Tap “EZ REGISTRATION WPS”.
(Operation on this camera)
.
EZ REGISTRATION WPS
ADD
7
Activate
WPS of the access point (wireless LAN router) within 2 minutes.
0
To activate WPS, refer to the instruction manual of the device in use.
8
After registration is complete, tap “OK” on the camera’s screen.
(Operation on this camera)
.
OK
WPS
WPA2
ENCRYPTION METHOD
SSID:********************************
REGISTERED
0
The following registration methods are also available.
“Registering Access Point Using WPS PIN” (A p. 111
)
“Registering Access Point Manually” (A p. 143)
Connecting Smartphone to Access Point (Wireless LAN
Router)
0
Connect the smartphone to the access point (wireless LAN router) at
home.
0
This
setting is not required if the smartphone has already been connected
to the access point (wireless LAN router) at home.
o
Regular Operation
Monitoring the images by connecting the smartphone and the
camera
o
Operation on this camera
1
Tap “MENU”.
(Operation on this camera)
.
REC
≪PLAY
MENU
0
The top menu appears.
2
Tap the “Wi-Fi” (Q) icon.
(Operation on this camera)
.
OFF
SETUP
TOP MENU
Wi-Fi
SETTING
RECORD
SETTINGS
CONNECTION
3
Tap “ACCESS POINT CONNECTION”.
(Operation on this camera)
.
Wi-Fi
Wi-Fi SETTING
ACCESS POINT
CONNECTION
CONNECTION
DIRECT
4
Start making a connection.
(Operation on this camera)
.
STOP
CONNECTING
INDOOR MONITORING
SSID:********************************
0
Name
(SSID) of the access point (wireless LAN router) in connection
is displayed.
5
The following is displayed when the camera is connected to the access
point.
.
REC
0:00:00 [2:04]
0:00:00 [2:04]
STOP
DIRECT MONITORING
0
Tap “URL” to display the URL required for connecting the camera
from browser.
o
Operation on the smartphone
Memo :
0
Prior to use this function, a smartphone application needs to be installed
on the smartphone.
“Installing Smartphone Applications” (A p. 114)
1
Start “Everio sync. 3” on the smartphone after setting “INDOOR
MONITORING”.
.
0
Tap “START” in INDOOR MONITORING on the camera to start.
Using Wi-Fi by Creating a QR Code
138
2
Tap “INDOOR MONITORING”.
.
3
The recording screen is displayed.
.
0
How to operate from a smartphone
“Using Smartphone Applications” (A p. 114)
OUTDOOR MONITORING
o
Setting (Once setting is done, start from the “Regular
Operation” below)
Obtaining a Dynamic DNS (DDNS) Account
By obtaining a dynamic DNS account, this unit may be used on the web as
usual
even if the IP address changes when making an access to this unit via
internet.
0
Only the JVC dynamic DNS service can be set on this camera.
To obtain (register) an account, perform the following steps.
1
Access the following URL from a browser and register for an account.
(Operation on a computer or smartphone)
https://dd3.jvckenwood.com/user/
Set your e-mail address as the username.
2
Check
that you have received a confirmation e-mail to the address used
in registration, and access the URL stated in the e-mail.
(Operation on a computer or smartphone)
3
Set the username and password used in registration on the camera.
(Operation on this camera)
Generate the QR code, and register the username and password to the
camera.
4
Execute OUTDOOR MONITORING.
(Operation on this camera)
If “OUTDOOR MONITORING” is executed while dynamic DNS settings
are enabled, the camera will access the dynamic DNS server.
5
Tap “CAMERA NETWORK INFO.” to check that the URL (WAN) is
displayed.
(Registration complete)
Caution :
0
Registration will be canceled if you do not access the dynamic DNS server
from the camera within 3 days.
Perform the registration again in this case.
0
Registration will not be complete if the username and password set on this
camera are incorrect. Be sure to check that they are correct.
0
Successful registration will be canceled too if you do not access the
dynamic DNS server for 1 year.
Creating a QR Code
o
Enter values in the required items for outdoor monitoring.
0
All items will be overwritten and set. Enter all the required items.
If connection fails, check that the contents entered for each item are
correct, regenerate the QR code and set the camera.
0
Password: set a password to connect this camera to the device via an
access point. (Not more than 8 characters)
0
DDNS: Set the connection environment to the internet. Normally set to
“ON”.
0
User name (DDNS): set an user name for the obtained DDNS account.
0
Password (DDNS): set a password for the obtained DDNS account.
0
UPnP:
Set to “ON” if the UPnP protocol may be used to connect the device
to the network.
0
HTTP Port: Set the port number for connecting to the internet. Normally
set to “80”.
Using Wi-Fi by Creating a QR Code
139
Display the screen for reading the QR code.
1
Tap “MENU”.
(Operation on this camera)
.
REC
≪PLAY
MENU
0
The top menu appears.
2
Tap the “Wi-Fi” (Q) icon.
(Operation on this camera)
.
OFF
SETUP
TOP MENU
Wi-Fi
SETTING
RECORD
SETTINGS
CONNECTION
3
Tap “Wi-Fi SETTING”.
(Operation on this camera)
.
Wi-Fi
Wi-Fi SETTING
ACCESS POINT
CONNECTION
CONNECTION
DIRECT
4
Tap “SET FROM QR CODE”.
.
SET FROM QR CODE
Wi-Fi SETTING
5
Tap “EXECUTE”.
.
STOPEXECUTE
SMART USER GUIDE
USING WEB USER GUIDE OR
Wi-Fi SETTING CAN BE SET
SET FROM QR CODE
Read a QR code.
1
Read a QR code.
(Operation on this camera)
.
PLEASE READ QR CODE
2
Tap “YES”.
.
NO
YES
OVERWRITTEN
PREVIOUS SETTING WILL BE
OUTDOOR MONITORING
CHANGE THE SETTING OF
SET FROM QR CODE
3
Tap “OK”.
.
NEXT
OK
SETTINGS COMPLETED
SET FROM QR CODE
0
Tap “NEXT” to return to the screen to read the QR code.
0
Set contents are saved.
Registering the access points (wireless LAN router) to this
unit
o
Wi-Fi Protected Setup (WPS) Registration
1
Tap “MENU”.
(Operation on this camera)
.
REC
≪PLAY
MENU
0
The top menu appears.
2
Tap the “Wi-Fi” (Q) icon.
(Operation on this camera)
.
OFF
SETUP
TOP MENU
Wi-Fi
SETTING
RECORD
SETTINGS
CONNECTION
Using Wi-Fi by Creating a QR Code
140
3
Tap “Wi-Fi SETTING”.
(Operation on this camera)
.
Wi-Fi
Wi-Fi SETTING
ACCESS POINT
CONNECTION
CONNECTION
DIRECT
4
Tap “ACCESS POINTS”.
(Operation on this camera)
.
ACCESS POINTS
Wi-Fi SETTING
5
Tap “ADD”.
(Operation on this camera)
.
ADD
ACCESS POINTS
SET
6
Tap “EZ REGISTRATION WPS”.
(Operation on this camera)
.
EZ REGISTRATION WPS
ADD
7
Activate
WPS of the access point (wireless LAN router) within 2 minutes.
0
To activate WPS, refer to the instruction manual of the device in use.
8
After registration is complete, tap “OK” on the camera’s screen.
(Operation on this camera)
.
OK
WPS
WPA2
ENCRYPTION METHOD
SSID:********************************
REGISTERED
0
The following registration methods are also available.
“Registering Access Point Using WPS PIN” (A p. 111
)
“Registering Access Point Manually” (A p. 143)
o
Regular Operation
Connecting the Camera to the Smartphone
1
Tap “MENU”.
(Operation on this camera)
.
REC
≪PLAY
MENU
0
The top menu appears.
2
Tap the “Wi-Fi” (Q) icon.
(Operation on this camera)
.
OFF
SETUP
TOP MENU
Wi-Fi
SETTING
RECORD
SETTINGS
CONNECTION
3
Tap “ACCESS POINT CONNECTION”.
(Operation on this camera)
.
Wi-Fi
Wi-Fi SETTING
ACCESS POINT
CONNECTION
CONNECTION
DIRECT
4
Start making a connection.
(Operation on this camera)
.
STOP
SSID:********************************
CONNECTING
OUTDOOR MONITORING
0
Name
(SSID) of the access point (wireless LAN router) in connection
is displayed.
5
The following is displayed when the camera is connected to the access
point.
.
REC
0:00:00 [2:04]
0:00:00 [2:04]
INFO.
STOP
ACCESS POINT CONNECTION
0
Tapping “INFO.” displays the URL (WAN) for connecting the
smartphone.
(Does not appear if DDNS is not set or set incorrectly.)
0
“LUPnP” is displayed when UPnP cannot be used.
Using Wi-Fi by Creating a QR Code
141
o
Operation on the smartphone
Memo :
0
Prior to use this function, a smartphone application needs to be installed
on the smartphone.
“Installing Smartphone Applications” (A p. 114)
1
Start “Everio sync. 3” on the smartphone after setting OUTDOOR
MONITORING.
.
0
Tap “START” in OUTDOOR MONITORING on the camera to start.
2
Tap “OUTDOOR MONITORING”.
.
3
Set the URL.
.
0
It
is necessary to set the URL when you are using this feature for the
first time. Enter the URL displayed on the camera.
0
If this screen is displayed after the URL has been set, check the
connection status of the internet or the camera settings.
4
Log in with your username and password.
(if authentication cannot be achieved)
.
HTTP AUTHORIZATION
AUTHORIZATION FAILED
CHECK USER NAME AND PASSWORD
USERNAME
PASSWORD
CANCELOK
0
The username is “everio” and the default password is “0000”.
0
To change the password, it is necessary to generate a QR code.
“Creating a QR Code” (A p. 139)
5
The recording screen is displayed.
.
6
Operate from a smartphone
.
0
How to operate from a smartphone
“Using Smartphone Applications” (A p. 114)
Using Wi-Fi by Creating a QR Code
142
Registering Access Point Manually
Creating a QR Code
o
Enter the items required for registering the access point
0
All items will be overwritten and set. Enter all the required items.
0
SSID: Set the identification name (SSID) of the access point.
0
Security Authentication: Set the encryption standard for communication
security.
0
Password: Set the password for the access point.
0
DHCP: Specify whether to obtain the required information for internet
connection automatically from the DHCP server (ON) or not (OFF).
0
When
DHCP is set to ON, it is not necessary to set the items following the
IP address.
0
IP Address: Set the information on internet connection (IP address) of the
camera.
0
Subnet Mask: Set the information on internet connection (subnet mask)
of the camera.
0
Default Gateway: Set the information on internet connection (default
gateway) of the camera.
0
Primary DNS: Set the information on internet connection (primary DNS)
of the camera.
0
Secondary DNS: Set the information on internet connection (secondary
DNS) of the camera.
Display the screen for reading the QR code.
1
Tap “MENU”.
(Operation on this camera)
.
REC
≪PLAY
MENU
0
The top menu appears.
2
Tap the “Wi-Fi” (Q) icon.
(Operation on this camera)
.
OFF
SETUP
TOP MENU
Wi-Fi
SETTING
RECORD
SETTINGS
CONNECTION
3
Tap “Wi-Fi SETTING”.
(Operation on this camera)
.
Wi-Fi
Wi-Fi SETTING
ACCESS POINT
CONNECTION
CONNECTION
DIRECT
4
Tap “SET FROM QR CODE”.
.
SET FROM QR CODE
Wi-Fi SETTING
5
Tap “EXECUTE”.
.
STOPEXECUTE
SMART USER GUIDE
USING WEB USER GUIDE OR
Wi-Fi SETTING CAN BE SET
SET FROM QR CODE
Read a QR code.
1
Read a QR code.
(Operation on this camera)
.
PLEASE READ QR CODE
2
Tap “YES”.
.
NO
YES
8 POINTS HAVE ALREADY
UNABLE TO REGISTER IF
REGISTER THE ACCESS POINT
SET FROM QR CODE
3
Tap “OK”.
.
NEXT
OK
SETTINGS COMPLETED
SET FROM QR CODE
0
Tap “NEXT” to return to the screen to read the QR code.
0
Set contents are saved.
Using Wi-Fi by Creating a QR Code
143
Operating the Menu
The following menu is available on this unit.
0
TOP MENU: Menu that contains all the items specific to the video
recording,
still image recording, video playback, and still image playback
modes respectively.
Operating the Top Menu
You can configure various settings using the menu.
1
Tap “MENU”.
.
REC
≪PLAY
MENU
0
The top menu appears.
0
The menu differs according to the mode in use.
2
Tap the desired menu.
.
OFF
SETUP
TOP MENU
Wi-Fi
SETTING
RECORD
SETTINGS
CONNECTION
3
Tap the desired setting.
.
RECORD SETTING
Memo :
0
To display the previous/next menu
Tap 0 or 1.
0
To return to the previous screen
Tap J.
0
To exit the screen
Tap L (quit).
Settings Menu
144
RECORD SETTING Menu (video)
.
FOCUS
Focus can be adjusted manually.
“Adjusting Focus Manually (FOCUS)” (A p. 29)
*Displayed only in the manual recording mode.
BRIGHTNESS ADJUST
Adjusts the overall brightness of the screen.
“Adjusting Brightness” (A p. 30)
*Displayed only in the manual recording mode.
BACKLIGHT COMP.
Corrects the image when the subject appears dark due to backlight.
“Setting Backlight Compensation” (A p. 31)
*Displayed only in the manual recording mode.
WHITE BALANCE
Adjusts the color according to the light source.
“Setting White Balance” (A p. 32)
*Displayed only in the manual recording mode.
TELE MACRO
Enables close-up shots when using the telephoto (T) end of the zoom.
“Taking Close-up Shots (TELE MACRO)” (A p. 33)
*Displayed only in the manual recording mode.
TOUCH PRIORITY AE/AF
Automatically adjusts focus and brightness based on the subjects’ faces or selected area.
“Capturing Subjects Clearly (TOUCH PRIORITY AE/AF)” (A p.
41)
LIGHT(GZ-RX605)
Turns on/off the light.
SettingDetails
OFFDoes not light up.
AUTOLights up automatically when the surrounding is dark.
ONLights up at all times.
DIS
Camera shake during video recording can be effectively reduced.
“Reducing Camera Shake” (A p. 43)
GAIN UP
Makes the subject appear bright automatically when recording in dark places.
SettingDetails
OFFDeactivates the function.
ONElectrically brightens the scene when it is dark.
AUTO SLOW-SHUTTERSlows down the shutter speed to brighten the scene when it is dark.
Memo :
0
Although “AUTO SLOW-SHUTTER” brightens the scene more than “ON”, movements of the subject may become unnatural.
Settings Menu
145
WIND CUT
Reduces the noise caused by wind.
SettingDetails
OFFDeactivates the function.
ONActivates the function.
AUTOActivate the function automatically.
SELF-TIMER
Use this function when you wish to include the photographer in the picture or video.
“Using the Self-timer in Video Mode” (A p. 47
)
TIME-LAPSE RECORDING
This function enables the changes of a scene that occur slowly over a long period to be shown within a short time by taking frames of it at a certain interval.
This is useful for making observations such as the opening of a flower bud.
“Recording at Intervals (TIME-LAPSE RECORDING)” (A p. 44)
SELF-CHECK REC/PLAY
After recording for a specified duration, this unit automatically plays back the scene and then repeats the recording process and the playback process over
and over again.
“Recording at a Fixed Interval and Playing Back Repeatedly” (A p. 49
)
DATE/TIME RECORDING
You can record videos together with the date and time.
Set this when you want to save the file with date and time display.
(The date and time cannot be deleted after recording.)
“Recording Videos with Date and Time” (A p.
50)
TIME COUNTER RECORDING
You can take a video with a stopwatch recorded. You can start, stop and reset the stopwatch as with any stopwatch.
“Recording Videos with Time Counter” (A p. 51
)
CLOSE-UP SUB-WINDOW
Enlarges and displays a part of the screen in the sub screen.
“Recording with a Part of the Screen Enlarged in Sub Screen (CLOSE-UP SUB-WINDOW)” (A p.
46)
ANIMATION EFFECT
Records videos with animation effects.
“Recording with Animation Effects (ANIMATION EFFECT)” (A p. 39
)
RECORDING EFFECT
You can add and record various effects to the images. Once setting is done, you can easily record images that are suitable for each image.
o
GRAINY MONOCHROME
You can record images with a grainy black and white photo feel.
“Recording Images Like an Old Black and White Photo (GRAINY MONOCHROME)” (A p. 36
)
o
FOOD
You can capture images of the food to make the food look appetizing.
“Recording Food Images (FOOD)” (A p. 37)
o
BABY
You can capture soft images by enhancing the clarity and brightness of skin color. This effect is suitable for capturing images of a baby.
“Recording Images of a Baby (BABY)” (A p. 38)
Settings Menu
146
SHUTTER MODE
Continuous shooting settings can be adjusted.
SettingDetails
RECORD ONE SHOTRecords one still image.
CONTINUOUS SHOOTINGRecords still images continuously while the A button on the LCD screen is tapped.
Memo :
0
The size of the still image that is captured in the video mode is 1,920 x 1,080.
0
Some SD cards may not support continuous shooting.
0
The continuous shooting speed will drop if this function is used repeatedly.
SEAMLESS RECORDING
Continues recording on the SD card without stopping when the remaining space on the built-in memory runs out.
SettingDetails
OFFDoes not switch recording media automatically.
ONSwitches recording media automatically.
Memo :
0
Seamless recording cannot be performed if there is not enough free space in the SD card.
0
q appears if seamless recording cannot be performed.
0
To
start seamless recording again after the previous session is complete, it is necessary to combine seamless videos, or delete the combination information
of the seamless videos.
“Combining Videos Recorded by Seamless Recording” (A p. 74)
SYSTEM SELECT
Sets the frame rate for recording.
Sets whether to perform progressive recording of videos.
When
progressive recording is set, high quality images with a smooth depth of field can be recorded. In addition, fast-moving subjects can also be captured
sharply without flickering.
SettingDetails
50pRecords in progressive format.
50iDoes not record in progressive format.
Memo :
0
Video quality cannot be set in 50p mode.
0
Videos recorded in 50p are playable only on AVCHD Progressive compatible devices.
VIDEO QUALITY
Sets the video quality.
SettingDetails
UXPEnables recording in the best picture quality.
XPEnables recording in high picture quality.
EPEnables long recordings.
Memo :
0
Set to “UXP” or “XP” mode when recording fast-moving scenes or scenes with extreme changes of brightness to avoid noise.
Settings Menu
147
ZOOM
Sets the maximum zoom ratio.
SettingDetails
40x OPTICALEnables recording with 1 - 40x optical zoom. Set this when digital zoom is not desired.
60x DYNAMIC
(55x DYNAMIC)
Enables recording with 1 - 40x optical zoom and 41 - 60x dynamic zoom, when the image stabilizer is in
normal mode or set to off.
(Enables recording with 1 - 40x optical zoom and 41 - 55x dynamic zoom, when the image stabilizer is in
active mode. Not available in the enhanced AIS mode.)
80x DIGITAL (GZ-RX601)
120x DIGITAL (GZ-RX605)
Enables recording with 1 - 40x optical zoom and 41 - 80x digital zoom. (GZ-RX601)
Enables recording with 1 - 40x optical zoom and 41 - 120x digital zoom. (GZ-RX605)
100x DIGITAL (GZ-RX601)
200x DIGITAL (GZ-RX605)
Enables recording with 1 - 40x optical zoom and 41 - 100x digital zoom. (GZ-RX601)
Enables recording with 1 - 40x optical zoom and 41 - 200x digital zoom. (GZ-RX605)
Memo :
0
When digital zoom is used, the image becomes grainy as it is digitally enlarged.
0
The angle of view changes when the image stabilizer is turned on or off.
ZOOM MIC
Sets the zoom microphone.
SettingDetails
OFFDeactivates the zoom microphone.
ONRecords audio sounds in the same direction as the zoom operation.
Memo :
0
When “ON” is selected, the volume of the wide angle (W) end is lower than the telephoto (T) end.
MIC LEVEL
Make the adjustments such that “MIC LEVEL” does not turn red.
SettingDetails
OFFHides display of microphone input level.
ONShows display of microphone input level.
MIC LEVEL SETTING
Sets the microphone level.
Make the adjustments such that “MIC LEVEL” does not turn red.
SettingDetails
+1Increases the microphone input level.
0The microphone input level is not changed.
-1Decreases the microphone input level.
K2 TECHNOLOGY
Reduces the degradation of sound quality caused by digital signal processing, and records a sound quality close to the original.
SettingDetails
OFFDeactivates K2 TECHNOLOGY.
ONActivates K2 TECHNOLOGY.
SCREEN LOCK
When shooting under water, lock the touch screen to prevent operation errors.
“Locking the Screen (when Shooting Underwater)” (A p. 11)
Settings Menu
148
LCD CLOSED RECORDING
This unit does not turn off even when the LCD monitor is closed during recording.
SettingDetails
OFFThe unit is turned off when the LCD monitor is closed.
ONActivates LCD CLOSED RECORDING.
Memo :
0
If “LCD CLOSED RECORDING” is set to “ON”, stop the recording before turning off the unit.
0
When
“LCD CLOSED RECORDING” set to “ON” and recording is in progress with the LCD monitor closed (or LCD monitor reversed), the zoom lever and
the START/STOP button cannot be operated.
Settings Menu
149
RECORD SETTING Menu (still image)
.
FOCUS
Focus can be adjusted manually.
“Adjusting Focus Manually (FOCUS)” (A p. 29)
*Displayed only in the manual recording mode.
BRIGHTNESS ADJUST
Adjusts the overall brightness of the screen.
“Adjusting Brightness” (A p. 30)
*Displayed only in the manual recording mode.
BACKLIGHT COMP.
Corrects the image when the subject appears dark due to backlight.
“Setting Backlight Compensation” (A p. 31)
*Displayed only in the manual recording mode.
WHITE BALANCE
Adjusts the color according to the light source.
“Setting White Balance” (A p. 32)
*Displayed only in the manual recording mode.
TELE MACRO
Enables close-up shots when using the telephoto (T) end of the zoom.
“Taking Close-up Shots (TELE MACRO)” (A p. 33)
*Displayed only in the manual recording mode.
TOUCH PRIORITY AE/AF
Automatically adjusts focus and brightness based on the subjects’ faces or selected area.
“Capturing Subjects Clearly (TOUCH PRIORITY AE/AF)” (A p.
41)
LIGHT(GZ-RX605)
Turns on/off the light.
SettingDetails
OFFDoes not light up.
AUTOLights up automatically when the surrounding is dark.
ONLights up at all times.
SELF-TIMER
Use this when taking a group photo.
“Using the Self-timer” (A p. 47)
GAIN UP
Makes the subject appear bright automatically when recording in dark places.
SettingDetails
OFFDeactivates the function.
ONElectrically brightens the scene when it is dark.
Memo :
0
Setting can be adjusted separately for videos.
“GAIN UP (Video)” (A p. 145)
Settings Menu
150
RECORDING EFFECT
You can add and record various effects to the images. Once setting is done, you can easily record images that are suitable for each image.
o
GRAINY MONOCHROME
You can record images with a grainy black and white photo feel.
“Recording Images Like an Old Black and White Photo (GRAINY MONOCHROME)” (A p. 36)
o
FOOD
You can capture images of the food to make the food look appetizing.
“Recording Food Images (FOOD)” (A p. 37
)
o
BABY
You can capture soft images by enhancing the clarity and brightness of skin color. This effect is suitable for capturing images of a baby.
“Recording Images of a Baby (BABY)” (A p. 38)
SHUTTER MODE
Continuous shooting settings can be adjusted.
SettingDetails
RECORD ONE SHOTRecords one still image.
CONTINUOUS SHOOTINGRecords still images continuously while the START/STOP button is pressed.
Records still images continuously while the START/STOP button is pressed, or while the A button on the
LCD screen is tapped.
Memo :
0
Some SD cards may not support continuous shooting.
0
The continuous shooting speed will drop if this function is used repeatedly.
IMAGE SIZE
Sets the image size (number of pixels) for still images.
SettingDetails
1920X1080(2M)Takes still images with aspect ratio 16:9.
0
The sides of still images recorded in 16:9 aspect ratio may be cut off when printed.
3680X2760(10M)
1440X1080(1.5M)
640X480(0.3M)
Takes still images with aspect ratio 4:3.
SCREEN LOCK
When shooting under water, lock the touch screen to prevent operation errors.
“Locking the Screen (when Shooting Underwater)” (A p. 11)
Settings Menu
151
PLAYBACK SETTING Menu (video)
.
DISPLAY DATE/TIME
Sets whether to display the recording date and time during video playback.
SettingDetails
OFFDoes not display the date and time during playback.
ONDisplays the date and time during playback.
TIME COUNTER PLAYBACK
A time counter that can be reset can be displayed during playback.
“TIME COUNTER PLAYBACK” (A p. 58)
SLOW-MOTION SPEED
For specifying the playback speed of slow playback.
SettingDetails
1/2Sets the speed of slow playback to 1/2 normal playback speed.
1/4Sets the speed of slow playback to 1/4 normal playback speed.
1/8Sets the speed of slow playback to 1/8 normal playback speed.
DIGEST PLAYBACK
Plays back a digest of the recorded videos.
“ DIGEST PLAYBACK ” (A p. 63)
PLAYBACK OTHER FILE
Plays videos with defective management information.
“ PLAYBACK OTHER FILE ” (A p. 64)
Settings Menu
152
EDIT Menu (video)
.
PROTECT/CANCEL
Protects files from being deleted accidently.
“Protecting/Releasing Protection of the Currently Displayed File” (A p. 71)
“Protecting/Releasing Protection of Selected Files” (A p. 72)
COPY
Copies files from the built-in memory to the SD card.
“Copying Files to an SD Card” (A p. 77
)
TRIMMING
Select the required part of a video and save it as a new video file.
The original video remains in its existing location.
“Capturing a Required Part in the Video (TRIMMING)” (A p. 75)
SEAMLESS REC CTRL
Videos that are recorded on two separate media and with “SEAMLESS RECORDING” in the video recording menu enabled can be combined into a single
video.
“Combining Videos Recorded by Seamless Recording” (A p. 74)
Settings Menu
153
PLAYBACK SETTING Menu (still image)
.
SLIDE SHOW EFFECTS
Sets the transition effects in slideshow playback.
SettingDetails
SLIDESwitches the screen by sliding in from right to left.
BLINDSSwitches the screen by dividing into vertical strips.
CHECKERBOARDSwitches the screen by changing through a checkered pattern.
RANDOMSwitches the screen with a random effect from SLIDE, “BLINDS”, and “CHECKERBOARD”.
Memo :
0
Slideshow effects are not available when playing back still images in external devices (such as USB external hard disk drives).
Settings Menu
154
EDIT Menu (still image)
.
PROTECT/CANCEL
Protects files from being deleted accidently.
“Protecting/Releasing Protection of the Currently Displayed File” (A p. 71)
“Protecting/Releasing Protection of Selected Files” (A p. 72)
COPY
Copies files from the built-in memory to the SD card.
“Copying Files to an SD Card” (A p. 77
)
Settings Menu
155
SETUP (video/still image)
.
Mobile User Guide
Displays the QR code to access the Mobile User Guide.
.
URL:
MOBILE USER GUIDE
0
The portal site appears when the QR code has been read correctly.
Select the model name of your camera to display its Mobile User Guide.
Memo :
0
To read the QR code, a relevant application is required. Enter the URL in the internet browser manually if the QR code cannot be read.
0
The
Mobile User Guide is supported by Android devices and iPhone. You can view it on standard browsers such as Google Chrome (Android) and Mobile
Safari (iPhone).
0
QR Code is a registered trademark of Denso Wave Incorporated.
DATE & TIME
Resets the current time or sets to the local time when using this unit overseas.
“Clock Setting” (A p. 16)
“Setting the Clock to Local Time when Traveling” (A p. 19
)
“Setting Daylight Saving Time” (A p. 20)
DATE DISPLAY STYLE
Sets the order of year, month, day and the time display format (24H/12H).
Sorting OrderTime Display
year.month.day12h
month.day.year24h
day.month.year-
LANGUAGE
The language on the display can be changed.
“Changing the Display Language” (A p. 17
)
Settings Menu
156
MONITOR BRIGHTNESS
Sets the brightness of the LCD monitor.
SettingDetails
AUTOSets the brightness automatically to “4” when using outdoors and to “3” when using indoors.
4Brightens the backlight of the monitor regardless of the surrounding conditions.
3Sets to the standard brightness.
2Darkens the backlight of the monitor regardless of the surrounding conditions.
1Sets to dim brightness.
Helps to save battery life when selected.
OPERATION SOUND
Turns on or off the operation sound.
SettingDetails
OFFTurns off the operation sound.
ONTurns on the operation sound.
AUTO POWER OFF
When no operation is made for 5 minutes, this function turns off this unit or sets this unit to standby mode when using the AC adapter in case you forgot to
turn off the power.
SettingDetails
OFFPower is not turned off even if this unit is not operated for 5 minutes.
ONTurns off the power automatically if this unit is not operated for 5 minutes.
Memo :
0
Turns off the power automatically if this unit is not operated for 5 minutes.
0
When using the AC adapter, this unit goes into standby mode.
DEMO MODE
Plays a demonstration of the special features of this unit.
SettingDetails
OFFDeactivates the function.
ONPlays a demonstration of the special features of this unit.
Memo :
0
This mode is not available in the playback mode.
TOUCH SCREEN ADJUST
Adjusts the response position of the buttons on the touch screen.
“Adjusting the Touch Screen” (A p. 12)
REC MEDIA FOR VIDEO
Sets the recording/playback media of videos.
SettingDetails
I BUILT-IN MEMORYRecords videos to this unit's built-in memory.
G SD CARDRecords videos to the SD card.
Settings Menu
157
REC MEDIA FOR IMAGE
Sets the recording/playback media of still images.
SettingDetails
I BUILT-IN MEMORYRecords still images to this unit’s built-in memory.
G SD CARDRecords still images to the SD card.
FORMAT BUILT-IN MEM.
Deletes all files on the built-in memory.
SettingDetails
FILEDeletes all files on the built-in memory.
FILE + MANAGEMENT NODeletes all files on the built-in memory and resets the folder and file numbers to "1".
(File number of the AVCHD video file starts from “0”.)
Caution :
0
All data on the built-in memory will be deleted when it is formatted.
Copy all files on the built-in memory to a computer before formatting.
0
Make sure that the battery pack is fully charged or connect the AC adapter as the formatting process may take some time.
FORMAT SD CARD
Deletes all files on the SD card.
SettingDetails
FILEDeletes all files on the SD card.
FILE + MANAGEMENT NODeletes all files on the SD card and resets the folder and file numbers to "1".
Caution :
0
Not available for selection when no SD card is inserted.
0
All data on the SD card will be deleted when it is formatted.
Copy all files on the SD card to a computer before formatting.
0
Make sure that the battery pack is fully charged or connect the AC adapter as the formatting process may take some time.
FACTORY PRESET
Returns all the settings to their default values.
FIRMWARE UPDATE
Updates the functions of this unit to the latest version.
For details, refer to the JVC homepage.
(When no program to update the software of this unit is available, nothing will be provided on the homepage.)
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for JVC GZ-RX605 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of JVC GZ-RX605 in the language / languages: English as an attachment in your email.
The manual is 12,56 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.