508096
19
Zoom out
Zoom in
Previous page
1/72
Next page
19
ENGLISH
GETTING
STARTED
Using an SD Card
If you want to record to an SD card, the
following operations need to be performed.
Operations are confirmed on the following
SD cards. Class 4 or higher compatible
SD or SDHC card Panasonic, TOSHIBA,
SanDisk, ATP SD card (256 MB to 2 GB) or
SDHC card (4 GB to 32 GB).
If other media are used, they may fail to
record data correctly, or they may lose data
that had already been recorded.
MultiMediaCards are not supported.
Cards used to record video on this
camcorder cannot be played back on other
devices.
Some card readers (including internal card
readers in PCs) may not be able to support
SDHC format. If you use an SDHC card for
recording and encounter any reading error,
the card reader you are using, might be a
non-SDHC supported device. Please use
the camcorder or other SDHC compatible
devices to access the card.
Q Insert an SD card
Preparation:
Press Power ( ) button to turn off the
camcorder.
1
Open the SD card cover.
2
Firmly insert the card with its clipped
edge first.
3
Close the SD card cover.
L
To remove an SD card
Push the SD card once.
After the card comes out a little, pull it out.
NOTE
Insert and remove the SD card only while
the power is turned off. Otherwise, data on
the card may be corrupted.
Do not touch the terminal on the reverse
side of the label.
R Change the recording medium
The camcorder is programmed to record on
SLOT A when it is shipped from the factory.
You can change the recording medium to
SLOT B.
Set [VIDEO SLOT SELECTION] and
[IMAGE SLOT SELECTION] to [SLOT A]
or [SLOT B]. (Z p. 58)
SCENE SELECT
SHUTTER SPEED
FOCUS
ADJUST BRIGHTNESS
@
@
@
1
,
S
CENE SELEC
T
S
H
U
TTER
S
PEE
D
FOC
U
S
@
@
1
,
MEDIA SETTING
SET
QUIT
SLOT B
SLOT A
Clipped Edge
1. Recording media switches automatically
from Slot A to Slot B and vice versa
after the card in the selected slot is full.
(
Z p. 56)
2. You can select Slot A or Slot B manually
as recording media for video and still
image respectivety.
(Z p. 58)
INFORMATION
S Format an SD card when using it for
the first time
Select [FORMAT SD CARD] to format
the card. (Z p. 58)
MEDIA SETTING
VIDEO SLOT SELECTION
IMAGE SLOT SELECTION
FORMAT SD CARD
ERASE ALL DATA
SET
QUIT
,
GZ-MS120_95EK_GB_EN.indb 19 8/3/2009 12:14:53 PM
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC GZ-MS120 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC GZ-MS120 in the language / languages: English as an attachment in your email.

The manual is 9,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of JVC GZ-MS120

JVC GZ-MS120 User Manual - German, Dutch - 80 pages

JVC GZ-MS120 User Manual - Dutch - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info