291250
54
Zoom out
Zoom in
Previous page
1/101
Next page
54 EN
REFERENCES
MasterPage: Body_Left
Other problems
The power/charge lamp on the camera does
not light during charging.
Charging is difficult in places subject to extremely
high/low temperatures.
H To protect the battery, it is recommended to
charge it in places with a temperature of 10°C to
35°C. ( pg. 58)
The data process is too slow after the power
is switched on or the mode is changed.
There is a large number of still images (approx.
1,000 or more) stored in the recording medium.
H Copy the stored files to a PC, and delete them
from the recording medium.
[SET DATE/TIME!] appears.
The built-in clock's rechargeable lithium battery is
discharged.
The previously set date/time is erased.
H Connect the camera to an AC outlet using the AC
adapter for over 24 hours to charge the clock's
lithium battery. Then set the date/time. ( pg. 18)
Files cannot be deleted.
Files are protected.
H Remove protection from the files and delete them.
( pg. 38, 50)
When the image is printed from the printer, a
black bar appears at the bottom of the
screen.
This is not a malfunction.
H By recording with DIS activated, this can be
avoided. ( pg. 50)
Images on the LCD monitor appear dark or
whitish.
In places subject to low temperature, images
become dark due to the characteristics of the
LCD monitor. This is not a malfunction.
H Adjust the brightness and angle of the LCD
monitor. ( pg. 9, 19, 49)
When the LCD monitor's fluorescent light reaches
the end of its service life, images on the LCD
monitor become dark.
H Consult your nearest JVC dealer.
Coloured bright spots appear all over the
LCD monitor.
The LCD monitor is made with high precision
technology. However, black spots or bright spots
of light (red, green or blue) may appear constantly
on the LCD monitor. These spots are not
recorded on the picture. This is not due to any
defect of the unit. (Effective dots: more than
99.99 %)
The SD card cannot be removed from the
camera.
H Push in the SD card a few more times. ( pg. 20)
Picture does not appear on the LCD monitor.
The LCD monitor's brightness setting is too dark.
H Adjust the brightness of the LCD monitor.
( pg. 19, 49)
M5E3PAL.book Page 54 Tuesday, August 2, 2005 4:04 PM
54


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC gz-mg50 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC gz-mg50 in the language / languages: English as an attachment in your email.

The manual is 11,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of JVC gz-mg50

JVC gz-mg50 Installation Guide - Dutch - 36 pages

JVC gz-mg50 User Manual - Dutch - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info