32) N Audio/Video Output Connector [AV] O USB (Universal Serial Bus) Connector ( SOFTWARE INSTALLATION AND USB CONNECTION GUIDE) P
DC Input Connector [DC] ( pg. 12) Be careful not to cover W, X, Y and Z during shooting. Carrying or holding the camera by the LCD monitor can result in
dropping the unit, or in a malfunction. ATTENTION: 12 EN Necessary Settings before Use 3 Charge the battery pack by connecting to the AC adapter. Open
the cover.
Be sure to configure the following three settings before use. Power Related Preparations (Using the Battery Pack) 1 Set the power switch to OFF. Slide while
pressing down the lock button. Power off Playback Recording Lock button DC Connector To AC Outlet (110V to 240V) 2 Attach the battery pack. Slide the
battery pack down until it locks in place. Bottom of the Camera AC Adapter Power Cord BATT. The power/charge lamp blinks to indicate charging has
started. When the lamp goes out, charging is finished. Unplug the power cord from the AC outlet and disconnect the AC adapter from the camera. To detach
the battery pack Slide and hold BATT.
( step 2), then remove the battery pack. Controls in this section Power/Charge Lamp Power Switch Battery pack BN-VF707U (Provided) BN-VF714U BN-
VF733U Charging time 1 hr. 30 min. 2 hr. 40 min. 5 hr. 40 min. To check the remaining battery power ( pg. 14) Required charging / recording time
Recording time 1 hr. 10 min.
(1 hr. 5 min.) 2 hr. 25 min. (2 hr.
20 min.) 5 hr. 50 min. (5 hr. 30 min.
) The times shown above are approximate times. The values within ( ) are the times when the LED light is on. NOTE: You can also use the camera with just
the AC adapter. INDEX / / / / 49 MENU EN 13 Language Setting The language on the display can be changed. ( pg. 54) Date/Time Setting The recording start
date/time is recorded on the video/still image file and it can be checked by pressing INFO. ( pg. 26, 30) In addition, you can find the desired file from the date
index screen. ( pg. 28) After performing step 1-4 in "Language Setting" ( pg.
13) Set the power switch to or . Slide while pressing down the lock button. Power off Playback Recording Lock button 5 Select [CLOCK ADJUST]. Select Set
31 CLOCK ADJUST DATE TIME 01 2006 11 : 07 3 CAMERA SETTING BASIC SETTING REC MEDIA SETTING DATE/DISPLAY REGISTER EVENT
QUALITY WIND CUT 6 Set the date and time. Select Set 4 Select [DATE/DISPLAY]. Select Set DATE/TIME SCENE COUNTER Repeat this step to input the
month, day, year, hour and minute. LANGUAGE CLOCK ADJUST DATE DISPLAY ORDER 7 5 Select [LANGUAGE]. Select Set ENGLISH You have now
finished configuring the necessary settings. To use the camera right away To record videos ( pg. 16) To record still images ( pg.
20) To configure other settings ( pg. 14) 6 Select the desired language. Select Set 7 GETTING STARTED 1 2 Open the LCD monitor. ( pg. 10) 14 EN Other
Settings Data Battery System You can check the remaining battery power and the recordable time.
Check which buttons to use in the illustration of "Controls in this section" on page 12. Grip Adjustment Open the pad and make grip adjustments. When the
battery is attached 1 Set the power switch to OFF. Slide while pressing down the lock button. Power off Playback Recording Lock button 2 100% BATTERY
CONDITION MAX TIME 50% 0% min Tripod Mounting Bottom of the Camera NOTES: Align the camera stud hole with the tripod stud, and the mounting
socket with the screw, and then rotate the camera clockwise to mount it to the tripod.
Battery information is displayed for approx. 3 seconds if the button is pressed and released quickly, and for approx. 15 seconds if the button is pressed and
held for several seconds. If "COMMUNICATING ERROR" appears instead of the battery status even though you tried to press several times, there may be a
problem with your battery. In such a case, consult your nearest JVC dealer.
You're reading an excerpt. Click here to read official JVC GZ-MG27E
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for JVC GZ-MG27E at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of JVC GZ-MG27E in the language / languages: German as an attachment in your email.
The manual is 0,45 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
