291593
51
Zoom out
Zoom in
Previous page
1/60
Next page
51
ENGLISH
The camera is a microcomputer-controlled
device. External noise and interference (from
a TV, a radio, etc.) might prevent it from
functioning properly.
The following phenomena are not
malfunctions.
The camera heats up when it is used for a
long time.
The battery heats up during charging.
When playing back a video fi le, the
image stops momentarily or the sound is
interrupted at junctions between scenes.
To solve the problem, fi rst follow the
instructions below.
If the problem is not solved, reset the
camera. ( below)
If the problem persists, please consult your
nearest JVC dealer.
8 To reset the camera
1) Set the power/mode switch to OFF and
remove the power supply (battery pack
or AC adapter) from the camera, then
reattach it.
2) Execute [PRESET] from the menu.
( pg. 49)
Trouble Action
Power
No power is supplied.
Connect the AC adapter securely.
Detach the battery pack once again and re-attach it fi rmly.
Replace the dead battery with a fully charged one.
12
12
No display appears.
If the camera is not operated for 5 minutes while
the power is on, it turns itself off automatically to
conserve power.
To turn the camera on again when
using the battery pack, set the power/mode switch to
OFF, then to ON. When using the AC adapter, perform
any operation such as zooming.
Adjust the brightness of the LCD monitor.
48
The power was turned
off accidentally.
Move to a place where no vibration or excessive sound.
The drop detection function operated. Set the power/
mode switch to OFF, and to ON again. To turn off this
function, set [DROP DETECTION] to [OFF].
48
The displayed amount
of remaining battery
power differs from the
actual operating time.
Fully charge the battery, and then run it down. If the
problem persists, the battery is worn out and needs to be
replaced. Please purchase a new one.
12
The power does not
turn on, or the battery
operation time is
extremely short even
after the battery is
fully charged.
Make sure to use the camera under appropriate operating
temperatures.
The battery is worn out and needs to be replaced. Please
purchase a new one.
56
The access/charge
lamp on the camera
does not light during
charging.
Charging is diffi cult in places subject to extremely
high/low temperatures. To protect the battery, it is
recommended to charge it in places with a temperature
of 10°C to 35°C.
When the battery is already fully charged, the lamp does
not light. Check the remaining battery power.
14
Troubleshooting
51


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC gz mg175ek hard disk digital camcorder at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC gz mg175ek hard disk digital camcorder in the language / languages: English as an attachment in your email.

The manual is 8,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info