532501
62
Zoom out
Zoom in
Previous page
1/72
Next page
Setting Details
REC MODE For setting the image quality when “SYSTEM SELECT” is in the 1920 mode.
UXP: Enables recording in the best picture quality.
0
Applies to Blu-ray discs only. Videos taken in high-definition quality cannot be saved to DVDs.
XP: Enables recording in high picture quality.
SP: Enables recording in standard quality.
EP: enables long recording.
Memo :
0
This setting is not available when “SYSTEM SELECT” is set to the 4K2K mode.
0
This setting is not available when the frame rate is 60p or 50p.
EDGE BLENDING Overlaps the seam of four images when “SYSTEM SELECT” is set to the 4K2K mode.
0 PIXEL: does not overlap the seam of the images during recording.
16 PIXEL: record with the borders overlapped. (A black band will appear on up, down, left and right).
ZOOM Sets the maximum zoom ratio.
10x/OPTICAL: Enables recording with 1 - 10x optical zoom. Set this when dynamic zoom is not desired.
20x/DYNAMIC: Enables recording with 1 - 10x optical zoom and 11 - 20x digital zoom.
Memo :
0
This setting is not available when “SYSTEM SELECT” is set to the 4K2K mode.
WIND CUT Setting this to “ON” reduces any noise caused by the wind.
Memo :
0
You can specify a setting for each of the [INPUT1] (microphone), [INPUT2] (microphone), and [MIC]
(microphone/built-in microphone) terminals.
GRID Setting this to “ON” displays gridlines (GRID) to make it easier to detect when the subject appears slanted.
TIME-LAPSE
RECORDING
This function enables the changes of a scene that occur slowly over a long period to be shown within a short
time by taking frames of it at a certain interval.
OFF: disables TIME-LAPSE RECORDING.
1SEC INTERVAL: records a frame at 1-second intervals. Recorded videos are played back at a 30x speed
(when recorded at 60i).
5SEC INTERVAL: records a frame at 5-second intervals. Recorded videos are played back at a 150x speed
(when recorded at 60i).
40SEC INTERVAL: records a frame at 40-second intervals. Recorded videos are played back at a 1200x
speed (when recorded at 60i).
Memo :
0
Audio cannot be recorded during TIME-LAPSE RECORDING.
0
DuringTIME-LAPSE RECORDING, zooming and image stabilizer are not available.
0
When recording is stopped with the recorded time less than “0:00:00:17”, the video will not be saved.
0
Settings of TIME-LAPSE RECORDING are reset when the power is turned off. To start time-lapse recording
again, it is necessary to make the selection once more.
0
Recording stops automatically 99 hours after it is started.
0
Make use of a tripod and AC adapter for TIME-LAPSE RECORDING with long intervals.
It is also recommended to fix the focus and white balance manually.
AUDIO REF. LEVEL For setting the audio reference level.
-20dB: Outputs signals of the reference level when the meter is at -20 dBFS.
-12dB: Outputs signals of the reference level when the meter is at -12 dBFS.
INTERNAL MIC LEVEL For setting the input level of the built-in microphone (-2 (low sensitivity) ~ 0 (standard) ~ +2 (high sensitivity)).
Settings Menu
62
62


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC GY-HMQ10E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC GY-HMQ10E in the language / languages: English as an attachment in your email.

The manual is 3,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info