532501
42
Zoom out
Zoom in
Previous page
1/72
Next page
o
Error Message
If the auto white balance adjustment is not correctly completed, one
of the following messages will appear for about 5 seconds.
Error Message Status
NGOBJECT The object used is defective.
Displayed when there is not enough white
color on the object, or when the color
temperature is not suitable.
Use another white object and adjust the
white balance again.
ERRORLOW
LIGHT
Insufficient illumination.
Displayed when the lighting is dark.
Increase the lighting and adjust the white
balance again.
ERROROVER
LIGHT
Excessive illumination.
Displayed when the lighting is too bright.
Decrease the lighting and adjust the white
balance again.
Using the Full Auto White (FAW) Function
The FAW function adjusts the white balance value automatically as
the lighting condition changes.
This mode is convenient when you have no time to adjust the white
balance or when the camera recorder is moved frequently in and
out of places with different lighting conditions.
1
Set to the Manual shooting mode.
2
Set “FAW” in the recording menu.
“ FAW ” (A p. 61)
You can assign FAW (Fulltime Auto White balance) to any of
the three positions on the [WHT.BAL] switch ([A], [B],
[PRST(PRESET)]).
3
Set the [WHT.BAL] switch to the position that
is assigned the FAW function.
Memo :
0
Set the camera recorder to the Full Auto shooting mode to
activate the FAW mode. White balance is automatically adjusted
according to the color temperature of the lighting on the object.
0
In these cases, white balance switching with the [WHT.BAL]
selection switch is disabled.
Caution :
0
The FAW function cannot provide optimum white balance with a
subject outside the FAW adjustment range, for example when it
contains only a single color or not enough white color.
0
The accuracy of FAW is inferior to that of Auto White Balance.
0
When the power of the camera recorder is turned on with the
FAW mode selected, it takes about 10 seconds for the FAW
adjustment to complete. Do not start recording during this
interval.
Adjusting the Camera Image
Applicable to: Full Auto shooting mode A, Manual shooting mode
M
The picture quality of the camera can be set using the recording
menu below. As the adjustments are shown on the screen, you can
adjust the values while checking the picture quality on the camera.
0
“GAMMA” (A p. 60)
0
“GAMMA LEVEL” (A p. 60)
0
“COLOR MATRIX” (A p. 60)
For details of the respective items, refer to the recording menu.
Shooting
42
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC GY-HMQ10E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC GY-HMQ10E in the language / languages: English as an attachment in your email.

The manual is 3,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info