532501
38
Zoom out
Zoom in
Previous page
1/72
Next page
Adjusting the Exposure Manually
Applicable to: Full Auto shooting mode A, Manual shooting mode
M
Generally, the brightness of the subject that is being shot is
automatically adjusted according to the reference values of the
camera. However, the brighter or darker areas of an image may
appear unclear depending on the shooting conditions. To prevent
this from occurring, you can correct the exposure manually.
1
Set to the Manual Exposure mode.
0
Press the [AE ±] button on the recorder unit.
0
The AE value appears on the screen, and the adjustment
mode is enabled.
.
AE Value
2
Adjust the exposure.
0
Operate with the [ADJ.] knob on the recorder unit.
0
Turn upward to increase the value and make the image
brighter.
0
Turn downward to decrease the value and make the image
darker.
3
Confirm the setting value.
0
Press the [SET] button on the recorder unit.
0
The manual setting value is set.
(The setting value (-6 to +6) is displayed on the screen.)
.
FULL AUTO
DOOR LOCK
A E
SET
GAIN
ADJ.
IRISWHT. BAL
SHUTTER
A F
M F
L-
M-
H-
B -
A -
PRST
[ADJ.] Knob
[SET] Button
[AE ±] Button
o
Setting exposure compensation to Auto
1
Press the [AE ±] button several times until the
AE value display disappears.
Adjusting Manual Gain
Applicable to: Manual shooting mode M
You can select the gain of the video amplifier using the [GAIN]
switch on the camera recorder. The default positions of the switch
are as follows.
The light sensitivity can be electrically boosted using the [GAIN]
switch when there is insufficient illumination on the object. (3
positions)
[GAIN] Switch
Details
L 0 dB (No boosting is applied.)
M 9 dB (Boosts sensitivity by about 3 times.)
H 18 dB (Boosts sensitivity by about 8 times.)
.
12dB
Gain Value
.
FULL AUTO
DOOR LOCK
A E
SET
GAIN
ADJ.
IRISWHT. BAL
SHUTTER
A F
M F
L-
M-
H-
B -
A -
PRST
[GAIN] Switch
Memo :
0
The gain value of each position can be set to “GAIN L”/“GAIN M”
/“GAIN H” in the recording menu within the range of “0dB” to
“18dB” (in increments of 3 dB), as well as to “AGC” or “AUTO
SLOW-SHUTTER”. (A p. 61)
0
Boosting the sensitivity causes the screen to appear grainier.
Automatic Gain Mode (Automatic Gain
Adjustment)
Set the camera recorder to the Full Auto shooting mode to activate
the Auto Gain Control mode. The gain of the video amplifier is
automatically set according to the brightness of the object.
(Selecting “AUTO SLOW-SHUTTER” switches to slow shutter,
while selecting any setting other than “AUTO SLOW-SHUTTER”
switches to “AGC”.)
Shooting
38
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC GY-HMQ10E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC GY-HMQ10E in the language / languages: English as an attachment in your email.

The manual is 3,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info