532511
38
Zoom out
Zoom in
Previous page
1/44
Next page
28
General
To prevent operational errors, the LCD display shows one of the following warning messages when an erroneous operation is
performed.
When the LCD display shows one of the following error messages during an auto white balance adjustment and Auto Set mode,
check ACauseB and ACheck PointB below and then retry the auto white balance adjustment. (The error message is displayed for
about 5 seconds.)
Warning Messages
Displayed Message Cause Check Point
INVALID ENTRY
GAIN : LOLUX
The gain is set to the Lolux mode. Exit from the Lolux mode, and then adjust the gain again.
INVALID ENTRY
FULL AUTO : ON
The [FULL AUTO] button is ON. Press the [FULL AUTO] button so that the lamp in it turns off, then retry
operation.
INVALID ENTRY
GAIN : ALC + EEI
[ALC + EEI] is AONB. Exit from the [ALC + EEI] mode, and then retry operation.
INVALID ENTRY
GAIN : ALC
[ALC] is AONB. Exit from the [ALC] mode, and then retry operation.
INVALID ENTRY
W.BAL : FAW
The white balance is set to the FAW
mode.
Cancel FAW and start the white balance adjustment.
INVALID ENTRY
W.BAL : PRESET
The [W. BAL] button is set to
APRESETB.
Auto white balance adjustment cannot be started in this mode.
INVALID ENTRY
W.BAL : MANUAL
The white balance adjustment is set to
manual mode by the [WHITE-AUTO]
button.
Auto white balance adjustment cannot be started in this mode.
INVALID ENTRY
BARS : ON
The [BARS] button is pressed. Press the [BARS] button so that the lamp in it turns off, then retry
operation.
Error Messages
Displayed Message Cause Check Point
AUTO WHITE A (B)
ERROR: LOW LIGHT
The light intensity is insufficient. Increase the lighting (illumination) or boost the gain with the [GAIN]
button.
(Note that the sensitivity deteriorates when the gain is boosted.)
AUTO WHITE A (B)
NG: OBJECT
The object is not suitable for shooting. Check if the object is white and change the object if required.
AUTO WHITE A (B)
ERROR: OVER LIGHT
The amount of incident light is too
high.
Check if a strong light source, such as the sun, is shining into the
camera either directly or as a result of a reflection caused by the
object.
The color temperature conversion filter
is not set properly.
Set the color temperature conversion filter to the correct position.
AUTO BLACK LENS NOT
CLOSED?
The lens will not close for auto black-
balance adjustment.
Set the camera so that the lens can be closed.
AUTO BLACK ERROR!
Auto black adjustment is not working
properly.
Check the setups of the RM-HP790DU/RM-HP790DE and camera
again.
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC GY-HM790 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC GY-HM790 in the language / languages: English as an attachment in your email.

The manual is 2,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info