532490
173
Zoom out
Zoom in
Previous page
1/184
Next page
Symptom Action
The time code and user’s bit
are not displayed.
0
Even in Camera mode or Media mode, the time code and user’s bit
may not be displayed depending to the type of display.
0
Is [LCD/VF] B [Display Settings] B [TC/UB] set to “Off”? To display
the time code and user’s bit, set it to “TC” or “UB”.
(A P108 [ TC/UB ] )
The date and time are not
displayed.
0
The date and time are only displayed on the Display 1 and Display 2
screens in the Camera mode (during shooting).
(A P126 [Display Screen in Camera Mode] )
0
Is [System] B [Record Set] B [Time Stamp] set to “On”? To display
the date and time, set it to “Off”.
(A P118 [ Time Stamp ] )
Incorrect display on the
viewfinder.
Is the LCD monitor used with [LCD/VF]
B
[LCD + VF] set to “Off”?
(A P105 [LCD/VF Menu] )
The actual recording time is
shorter than the estimated
time.
0
The recordable time may be shorter depending on the shooting
conditions or the subject.
The two camera recorders are
not synchronized even though
the time codes have been
synchronized. (Z on the Slave
device is not displayed.)
0
Is the [TC IN/OUT] switch correctly set?
(A P68 [Synchronizing Time Code on Another Camera] )
0
Set [System] B [Record Set] B [Record Format] B [WFrame & Bit
Rate] such that the two camera recorders have the same frame rate.
(A P115 [ W Frame & Bit Rate ] )
Cannot connect to wireless
LAN.
0
Check the mode of connection and method of setting ([SSID] and
[Passphrase] in cases other than WPS).
(A P144 [Connecting via Wireless LAN] )
0
Even if the Passphrase is wrong, “Completed the Setup Wizard.
Please Input the Passphrase into Your Device.” may appear at the
browser setting depending on the type of encryption.
Adjust [Passphrase] again.
The View Remote screen turns
black.
The screen flickers.
The screen freezes.
Cannot perform remote
operation.
0
The network path is congested.
Wait a while before refreshing (reloading) the web browser.
The clips cannot be uploaded
to the FTP server.
0
Adjust the [Clip Server] settings.
(A P121 [ Clip Server ] )
0
The maximum size of the recorded clip is 4 GB.
If a file size limit has been set in the FTP server settings, set the size
limit to more than 4 GB.
0
Take necessary action as described in “[List of FTP Transfer
Errors] P 169”.
The wireless LAN is
disconnected.
0
The wireless LAN may be disconnected depending on the
environment. Change the usage environment.
0
Connect via wired LAN.
(A P146 [Connecting via Wired LAN] )
GPS signal cannot be
received.
0
Signal reception from GPS satellites may be affected by buildings or
trees.
Perform positioning preferably at an unobstructed location with a clear
view.
The position is not accurate.
0
The precision error may be up to hundreds of meters if the GPS signal
is weak or reflected off surrounding buildings.
173
Others
173


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC GY-HM650U at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC GY-HM650U in the language / languages: English as an attachment in your email.

The manual is 18,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info