532498

JVC GY-HM600U Manual

61
Zoom out
Zoom in
Previous page
1/136
Next page
Setting Time Code
Generator
Presetting the Time Code
Time code and user’s bit data generated from the
internal time code generator are recorded.
This section describes how to set [TC Preset] in
the [TC/UB] menu.
(A P97 [ TC Preset ] )
Memo :
0
When [Main Menu] B [System] B [Record
Set] B [Record Format] B [Frame & Bit Rate] is
set to “50i(HQ)”, “50i(SP)”, “50p(HQ)”,
“50p(SP)”, “25p(HQ)”, “24p(HQ)”, or “50i”,
settings cannot be made in “Drop”.
(A P106 [ Frame & Bit Rate ] )
0
You can configure the setting without accessing
the [TC/UB] menu screen.
(A P63 [Setting Time Code without Opening
the Menu] )
Required Settings Before Preset
1
Set [TC/UB] B [TC Generator] to “Rec Run” or
“Free Run”.
(A P96 [ TC Generator ] )
0
[Rec Run]:
Preset data in the time code generator
operates in run mode during recording
mode. Set this when recording continuous
time code in connecting frames.
0
[Free Run]:
Time code starts to operate in run mode from
the preset time in the time code generator.
2
Select the framing mode for the time code
generator (only when the frame rate setting is
“60” or “30”).
Set using [Main Menu] B [TC/UB] B [Drop
Frame].
(A P97 [ Drop Frame ] )
0
[Drop]:
Sets the run mode of the time code generator
to drop frame mode. Use this setting when
placing emphasis on the recording time.
0
[Non Drop]:
Sets the run mode of the time code generator
to non-drop frame mode. Use this setting
when placing emphasis on the number of
frames.
Memo :
Drop frame/non-drop frame mode
0
When the frame rate setting in [Main Menu] B
[System] B [Record Set] B [Record Format] B
[Frame & Bit Rate] is “60p”, “60i”, or “30p”, the
actual number of frames per second is
approximately 59.94 (29.97). However, the time
code processing standard is “60p”, “60i”, or
“30p” frames. To make up for the frame number
discrepancy, the drop frame mode (Drop) drops
the 00 frame and 01 frame every minute except
for minutes that are multiples of 10. However, in
the case of “60p”, the 00, 01, 02 and 03 frame
are dropped.
0
The non-drop frame mode (Non Drop) does not
drop frames and ignores the discrepancy with
the actual time.
Setting Time Code
.
1
Select [Main Menu] B [TC/UB] B [TC Preset]
and press the Set button (R).
(A P97 [ TC Preset ] )
The [TC Preset] screen appears.
.
Memo :
0
When [TC/UB] B [TC Generator] is set to
“Regen”, the parameter is displayed as “Regen”
and cannot be selected.
(A P96 [ TC Generator ] )
61
Shooting
… 61 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC GY-HM600U at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC GY-HM600U in the language / languages: English as an attachment in your email.

The manual is 13,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of JVC GY-HM600U

JVC GY-HM600U User Manual - German - 132 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info