709261
184
Zoom out
Zoom in
Previous page
1/200
Next page
Protecting Overlay Settings with a
Password
You can use a password to protect overlay settings
to prevent
the cancellation of watermark display by
a third party.
Protecting with a Password
1
Set [Main Menu] B [Overlay Settings
]
B
[Password Lock] to “On”.
2
Enter the protection password and press I
on the cross-shaped button.
Enter not more than 16 characters for the
password using the software keyboard.
3
Enter the same password again and press
I on the cross-shaped button.
4
Press [Set].
A password request screen will appear
subsequently before you enter the [
Overlay
Settings] screen.
Caution :
0
Do not
forget the password that you have set. If
the password is lost or forgotten, you cannot
deactivate the password protection function.
Memo :
0
When overlay settings are protected by a
password, the
following items in [Main Menu] B
[System] are grayed out and cannot be selected.
0
[Reset All]
0
[Record Set
]
B [Record Format]
0
[Setup File
] B [Load File] B [Picture File]/
[User File]/[All File]
0
[Setup File] B [Store File] B [Picture File]/
[User File]/
[All File
]
Deactivating Password Protection
1
Select [Main Menu] B [
Overlay Settings]
.
A password request screen appears.
2
Enter the password and press I on the
cross-shaped button.
If the password matches the configured
password, the [Overlay Settings] menu
appears.
3
Change [Password Lock] to “Off”.
4
Press [Set] to close the deactivation
complete screen.
Specifying Text and Images
1
Connect the camera recorder to a network
compatible device
such as a mobile device
via the network.
(A P150 [Preparing Network Connection n] )
When network connection is established
between the devices, start the Web browser on
the network compatible device.
2
Enter the following URL in the address bar
of the Web browser.
.
http://
“IP address of camera ecorder”
Example; http://192.168.0.1
You can check the “IP address of camera
recorder” by pressing the [STATUS] button on
the camera recorder to display the Status
screen and use the cross-shaped button (H I)
to display the Network screen.
3
Enter the user name (jvc) and the password
(initial password:
0000) on the login screen
to display the Web screen.
4
Press the overlay control icon on the top
left of the screen or the [Overlay Control]
button to display the Settings screen.
.
4
5
Press the [Update] button to reflect the
specified text and images in the overlay.
184
Broadcast Overlay n
Connecting to the Network
n
184


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC GY-HM180U at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC GY-HM180U in the language / languages: English as an attachment in your email.

The manual is 11,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info