532503
68
Zoom out
Zoom in
Previous page
1/104
Next page
64
Menu Display and Detailed Settings
Rec Mode Menu
* Default values are indicated in bold characters.
Slot Mode Menu
Clip Set Menu
Record Set Menu
(continued)
Item Setting Values Function
Rec Mode
Normal
Pre Rec
Clip Continuous
Frame Rec
Interval Rec
For selecting the record mode for recording to the SDHC/SDXC card.
(A Page 45)
Memo :
When [Slot Mode] is set to ABackupB, this item is fixed at ANormalB and
cannot be selected.
Rec Frames
1frame
3frames
6frames
For setting the number of frames to record when [Rec Mode] is set to AFrame
RecB or AInterval RecB.
Rec Interval
1sec,
2sec, 5sec, 10sec, 30sec,
1min, 2min, 5min, 10min,
30min, 1hour
For setting the recording time interval when [Rec Mode] is set to AInterval
RecB.
Item Setting Values Function
Slot Mode
Series
Dual
Backup
For setting the operation of the card slot. (A Page 42)
Series : Mode that activates the two slots sequentially.
Dual : Mode that activates the two slots at the same time.
Backup : Mode that enables recording to slot B without using the [REC] button.
This item is selectable only when [Rec Mode] is set to ANormalB.
Start or stop recording using the [Backup Rec] menu or user button
that is assigned the function. (A Page 66)
Memo :
When this is set to A SeriesB, and recordable media are loaded to both the
slots, pressing the [REC] button starts recording only to the card in the
selected slot (active slot).
When this is set to A DualB, and recordable media are loaded to both the
slots, pressing the [REC] button starts simultaneous recording to the cards
in both slots.
Backup Rec
^ For starting/stopping backup recording with [REC]/[STBY].
This item is selectable only when [Slot Mode] is set to ABackupB.
Note :
When recording is stopped due to no remaining space on the media, etc.,
this item is fixed at ASTOPB and cannot be selected.
Item Setting Values Function
Clip Name Prefix
xxxG
(The default value of xxx
is the last three digits of
the serial number.)
For setting the first four characters of the name of the clip file to be recorded to the SDHC/
SDXC card.
Enter any of the 38 characters including alphabets (upper case), numbers (0 to 9), “_”
(underscore), and “-” (hyphen) using the software keyboard.
( A Page 59 [Text Input with Software Keyboard])
Reset Clip
Number
^ For assigning a new number to (Clip Number) by resetting it (0001). Select [Reset] and
press the center of the set lever to reset the number.
When other clips exist on the SDHC/SDXC card, the smallest available number is used
after reset.
Example: If the [Clip Name Prefix] is AABCDB, and AABCD0001B already exists on the
SDHC/SDXC card, AABCD0002B will be assigned.
GY-HM150U.book Page 64 Monday, September 5, 2011 1:48 AM
68


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC GY-HM150E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC GY-HM150E in the language / languages: English as an attachment in your email.

The manual is 28,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info