709258
237
Zoom out
Zoom in
Previous page
1/252
Next page
Troubleshooting
Symptom Action
Power does not turn on.
0
Is the AC adapter properly connected?
0
Is the battery charged?
0
Is the power turned on immediately after it is turned off?
Make sure to wait for an interval of at least 5 seconds before turning
on the power again.
Unable to start recording.
0
Is the record trigger button/lock switch on the handle turned on?
0
Is the write-protect switch of the SD card turned on?
Make sure that the write-protect switch is turned off.
(A P49 [Write-Protect Switch on the SD Card] )
0
Is the camera recorder set to the Camera mode?
Use the [MODE] selection button to switch to the Camera mode.
(A P24
[Operation Modes] )
0
Is the SD card inserted compatible with the recording format?
(
A P57 [Selecting a Video Format] )
(A P154 [ 4GB File Spanning(SDXC) ] )
Camera image is not output on
the LCD monitor and
viewfinder screen.
0
Is the camera recorder set to the Camera mode?
Use the [MODE] selection button to switch to the Camera mode.
(A P24 [Operation Modes] )
0
The LCD monitor and viewfinder screens cannot be displayed at the
same time.
To display
the viewfinder screen, close the LCD monitor or press and
hold the [DISPLAY] button.
Playback does not start after
selecting a clip thumbnail and
pressing the Set button (R).
0
Is the selected clip a playable clip?
Playback is
not possible if the clip has a different video format setting.
Images on the LCD monitor
and viewfinder screen appear
dark or blurred.
0
Readjust the brightness of the LCD monitor and viewfinder.
0
Is the [
ND FILTER] switch set to “1/64
”?
0
Is the iris closed?
0
Is the shutter speed setting too high?
0
Is the peaking level too low?
Use the [PEAKING +/-] button to adjust the contour for the LCD
monitor and the viewfinder screen.
(
A P43 [Adjusting the LCD Monitor] )
(
A P44 [Adjusting the Viewfinder] )
The [CH1/CH2]
recording
level
adjustment knob does not
work.
0
Is the [CH1/CH2 AUTO/MANUAL] switch set to “AUTO”?
0
Is the [FULL AUTO]
switch set to “ON”?
Is the [FULL AUTO] switch set to “ON”, and [A/V Set] B [Audio Set] B
[FULL AUTO] set to “Auto”?
(A P134
[ Audio On FULL AUTO ] )
Microphone audio cannot be
heard
through
the headphone.
0
Is the audio setting configured to “IFB/RET Only”?
Set [A/V Set] B [Audio Set] B [IFB/RET Monitor] B [CH1]/[CH2] to
“Off”.
(A P134
[ IFB/RET Monitor... ] )
SD card cannot be initialized
(formatted).
0
Is the write-protect switch of the SD card turned on?
Make sure that the write-protect switch is turned off.
(
A P49 [Write-Protect Switch on the SD Card] )
Battery alarm appears even
after loading a charged
battery.
0
Is the battery too old?
Troubleshooting
237
Others
237


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC GY-HC500SPCU at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC GY-HC500SPCU in the language / languages: English as an attachment in your email.

The manual is 15,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info