709257
218
Zoom out
Zoom in
Previous page
1/252
Next page
Memo :
0
To display only one image continuously, set
[Interval Time] to “0”.
0
When recording is performed together with live
streaming or when there is a lot of information
display on
the LCD/VF screen, images may take
more than 10 seconds to display. It is possible
to reduce the time taken to display by lowering
the resolution of the recording and live
streaming or by pressing the [DISPLAY] button
of the camera recorder to turn off the display
screen.
0
To use only the Full Screen Graphic function
without the overlay display, select [Overlay
Settings]
B [Type] and choose options other
than “None”. Then, set the [Overlay] button on
the web screen for controlling the overlay to Off.
0
When the format of the next image to be
displayed
is not supported during image display,
“Unsupported Graphic Format” will be displayed
on the camera recorder, and that image will not
be displayed. Import images that support a
displayable format.
(A P216 [Importing Images for Display to the
Camera] )
Protecting Overlay Settings with a
Password
You can use a password to protect overlay settings
to prevent
the cancellation of watermark display by
a third party.
Protecting with a Password
1
Set [Overlay Settings] B [
Password Lock
]
to “On”.
2
Enter the protection password and press
the cross-shaped button (I).
Enter not more than 16 characters for the
password using the software keyboard.
3
Enter the same password again and press
the cross-shaped button (I).
4
Press [Set].
A password request screen will appear
subsequently before you enter the [Overlay
Settings] screen.
Caution :
0
Do not
forget the password that you have set. If
the password is lost or forgotten, you cannot
deactivate the password protection function.
Memo :
0
When overlay settings are protected by a
password, the following items in [System] are
grayed out and cannot be selected.
0
[Reset All]
0
[Record Set]
B [Record Format]
0
[Setup File] B [Load File] B [Picture File]
/
[User File]/[All File]
0
[Setup File
]
B [Store File] B [Picture File]/
[User File]/[All File]
Deactivating Password Protection
1
Select [Overlay Settings].
A password request screen appears.
2
Enter the password and press the cross-
shaped button (I).
If the password matches the configured
password, the [Overlay Settings] menu
appears.
3
Change [Password Lock] to “Off”.
4
Press [Set] to close the deactivation
complete screen.
218
Broadcast Overlay A L
Overlay
A
L
218


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC GY-HC500E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC GY-HC500E in the language / languages: English as an attachment in your email.

The manual is 15,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info