595810
23
Zoom out
Zoom in
Previous page
1/49
Next page
42
5. PREPARATIONS
––– TIME/DATE –––
DISPLAY ON
DISPLAY MODE BARS+CAM
DATE REC OFF
DISPLAY STYLE DATE+TIME
DATE STYLE MM/DD/YY
TIME STYLE 24HOUR
SEC DISPLAY ON
CLOCK ADJUST..
PAGE BACK
––– CLOCK ADJUST –––
DATE(MM/DD/YY) 12/12/02
TIME 09:33
PAGE BACK
Time (Hour:Min)
6.
Display the screen for setting the date and time.
Rotate the SHUTTER dial to align the cursor (
) with the
CLOCK ADJUST item, and then press the SHUTTER dial.
The CLOCK ADJUST screen appears.
7.
Set the date and time.
The blinking digit is the one to be set.
1 When the SHUTTER dial is pressed, the blinking digit
moves to the next digit.
2 When the SHUTTER dial is rotated, the value of the
blinking digit changes.
When the SHUTTER dial is rotated upward, the value
becomes higher. When rotated downward, the value
becomes smaller.
3 Repeat the procedure described in 1 and 2 above to
set the month, day, year, hours, minutes.
The digits indicating seconds cannot be set.
4 Press the SHUTTER dial in sync with a time signal to
enter the date and time precisely.
8.
When all the settings are completed, rotate the SHUTTER
dial to align the cursor with the PAGE BACK item, and then
press the SHUTTER dial.
The TIME/DATE menu screen returns.
9.
To return to the normal screen, use either of the following
methods.
Press the STATUS button
or
Return to the TOP MENU screen and then select the EXIT
item from the TOP MENU screen before pressing the
SHUTTER dial.
TIME/DATE menu screen
DATE (Year/Month/Day)
CLOCK ADJUST menu screen
5-4 Setting, Displaying and Recording the Date and Time (Cont’d)
43
5. PREPARATIONS
Date
Whether or not the time and date should be displayed on the
screen and how to display them are set on the TIME/DATE
menu screen.
1.
Display the TIME/DATE menu screen.
1 Select the TC/UB/CLOCK item on the TOP MENU
screen.
2 Select the TIME/DATE item on the TC/UB/CLOCK menu
screen.
2.
Set the TIME/DATE menu screen.
DISPLAY item : Sets whether or not date and
time should be displayed. Set to
ON to display the indications.
DISPLAY MODE item : Sets the video output mode in
which date and time should be
displayed.
BARS : Displayed when the OUTPUT switch
on the side section is set to BARS.
CAM : Displayed when the OUTPUT switch
on the side section is set to CAM.
BARS + CAM : Date and time are always displayed.
DISPLAY STYLE : Sets the style in which the date and
time are displayed.
DATE + TIME : Date and time are displayed.
DATE : Date only is displayed.
TIME : Time only is displayed.
Display of date and time in the various operation modes.
In Camera mode : The date and time of the internal
clock are displayed.
In VTR playback mode : The date and time recorded on the
tape are displayed.
In VTR stop mode : The date and time of the internal
clock are displayed.
During DV signal input : The date and time from the DV
connector are displayed.
Displaying the Time and Date on the Screen
––– TC/UB/CLOCK –––
TC PRESET 00:00:00:00
EXECUTE
TC CLEAR CANCEL
UB PRESET 00 00 00 00
EXECUTE
UB CLEAR CANCEL
DROP/NON DROP DROP
TIME/DATE..
PAGE BACK
––– TIME/DATE –––
DISPLAY ON
DISPLAY MODE BARS+CAM
DATE REC OFF
DISPLAY STYLE DATE+TIME
DATE STYLE MM/DD/YY
TIME STYLE 24HOUR
SEC DISPLAY ON
CLOCK ADJUST..
PAGE BACK
FAS
–3dB
FAW
I
SD
B
12
.2V
01/02/03
AM
01:23:45
––– TIME/DATE –––
DISPLAY ON
DISPLAY MODE BARS+CAM
DATE REC BARS+CAM
DISPLAY STYLE DATE+TIME
DATE STYLE MM/DD/YY
TIME STYLE 24HOUR
SEC DISPLAY ON
CLOCK ADJUST..
PAGE BACK
TC/UB/CLOCK menu screen
TIME/DATE menu screen
Time
Recording the Date and Time Data
To record the date and time data during shooting, make the
menu settings described below. When the DATE REC item on
the TIME/DATE menu screen is set to “BARS” or “BARS+CAM”,
the screen size will be fixed at an aspect ratio of 4:3.
Setting the TIME/DATE menu
DISPLAY item : Set to ON.
DATE REC item : Select the video mode in which date
and time data should be recorded.
BARS : Date and time data are recorded only
when color bars are output.
BARS+CAM : Date and time data are recorded when
color bars and camera image are output.
OFF : Date and time data are not recorded.
TIME/DATE menu screen
MEMO:
DATE REC cannot be set during recording.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC GY-DV5000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC GY-DV5000 in the language / languages: English as an attachment in your email.

The manual is 3,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info