34423
23
Zoom out
Zoom in
Previous page
1/96
Next page
23
2. CONTROLS, INDICATORS AND CONNECTORS
7
IRIS mode switch
A: Activates the auto iris feature.
M: Allows manual iris control.
8
Momentary auto iris button
When the IRIS MODE switch
7
is at "M", pushing this button
activates the Auto Iris Function while it is held down only.
9
[S] IRIS speed adjusting control
For adjusting the iris operation speed.
0
FILTER thread
Protect the lens with a clear filter or UV filter by screwing
the filter onto the thread inside the lens hood from the front.
Other filters can be used for various effects.
!
ZOOM servo connector
Connect an optional zoom servo unit here.
@
ZOOM mode knob
S: Servo zoom mode. Allows operation by the zoom servo
control lever
6
.
M: Manual zoom mode. Allows zoom control by the zoom
lever/ring
2
.
#
BACK FOCUS ring/fixing screw
For back focus adjustment only. Secure with the screw knob
after adjustment.
See “Back Focus Adjustment” on page 44.
$
Macro focusing ring (for close-up shooting)
By rotating this ring in the direction of the arrow, close-up
shooting of very small objects becomes possible.
Normal focus adjustment and zooming are not available in
the macro mode.
To shoot images in the macro mode, set the focus ring
1
to
the infinite position and the zoom ring
2
to the maximum
wide-angle position. To adjust the focus of the macro image,
rotate this ring in the direction of the arrow until the object
is focused.
See “Attaching the Zoom Lens (optional)” on page 31.
See “Back Focus Adjustment” on page 44.
If the speed becomes too fast, hunting may occur.
To avoid the phenomena described above, perform
adjustment again.
M
RET
WT
A
MACRO
eqw
r
!0 !4
!1 !2 !3
tyuio
1
FOCUS ring
Manual focus ring.
2
ZOOM lever/ring
This is the manual zoom ring equipped with a zoom lever.
To adjust the zoom manually, turn the zoom mode knob
@
to position "M".
3
IRIS ring
Manual iris ring. To activate the auto iris feature, set the Iris
Mode switch
7
to A.
4
[VTR] Trigger button
To start/stop shooting.
5
[RET] return video button
The return video signal from the VCR section can be
monitored in the viewfinder only while this button is pushed.
* The playback picture can be viewed in the viewfinder
during this operation.
6
ZOOM servo control lever
To operate the servo zoom feature with this lever, set the
ZOOM knob
@
to S.
Pressing the W section of this lever increases the angle
of the lens for a wider shooting angle.
Pressing the T section of this lever narrows the lens angle
perspective for telephoto shots.
Pushing harder changes the speed of the zoom.
2-7 Lens (optional)
CAUTION:
The filter thread section rotates, so pay attention when
mounting a polarizing filter.
The back-focus knob is located close to the macro ring,
be careful not to mistake the back-focus knob for the
macro ring.
• After the required operation, be sure to return the macro
focusing ring to the normal position.
CAUTION:
Memo:
[S14 x 7.3B12]
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC GY-DV500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC GY-DV500 in the language / languages: English as an attachment in your email.

The manual is 4,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info