46752
40
Zoom out
Zoom in
Previous page
1/64
Next page
FEATURES FOR RECORDING
40 EN
MasterPage: Left
Makes dark subjects or areas even brighter than
they would be under good natural lighting.
Although the recorded image is not grainy, it may
look as if it is strobing due to the slow shutter
speed.
1 Set the power switch to “M”.
2 Press NIGHT (4/9) so that the Night-Scope
indicator “ ” appears.
The shutter speed is automatically adjusted to
provide up to 25 times sensitivity.
” appears beside “ ” while the shutter speed
is being automatically adjusted.
To deactivate Night-Scope
Press NIGHT (4/9) again so that the Night-
Scope indicator disappears.
NOTES:
During Night-Scope, the following functions or
settings cannot be activated and its indicator
blinks or goes out:
Some modes of “Program AE” or “Special
Effects” ( pg. 44, 45)
“Snapshot Flash” ( pg. 39)
“GAIN UP” in CAMERA menu ( pg. 34)
“DIS” in MANUAL menu ( pg. 34)
During Night-Scope, it may be difficult to bring the
camcorder into focus. To prevent this, use of a
tripod is recommended.
Once the camcorder is set, the camcorder
operator can become part of the scene in a
more natural way, adding the final touch to a
memorable picture.
1 Set the power switch to “M”.
2 Set “SELF-TIMER” to
“ON ”. ( pg. 33, 35)
The “ ” indicator
appears.
3 For video recording,
press the recording start/
stop button.
The tally lamp starts blinking.
After 15 seconds, the beep sounds and video
recording starts. The tally lamp stays on.
To stop self-timer recording, press the recording
start/stop button again.
The camcorder re-enters record-standby mode.
OR
3 For snapshot, press SNAPSHOT.
The tally lamp starts blinking.
After 15 seconds, the beep sounds and a
snapshot is taken. The tally lamp turns off. After
that, the camcorder re-enters record-standby
mode.
4 To end self-timer recording, select “OFF” in
step 2.
NOTE:
If “BEEP” and “TALLY” are set to “OFF” ( pg. 35),
the beep does not sound and the tally lamp does
not light.
Record a vacation or an important event in 5-
second clips to keep the action moving. This
function is available only for video recording.
1 Set “5S” to “5S”. ( pg. 33, 35)
The “5S” indicator appears.
2 Press the recording start/stop button to start
recording, and after 5 seconds the camcorder
enters record-standby mode automatically.
Even if you press the recording start/stop button
again within 5 seconds after recording starts,
record-standby mode is not engaged.
3 To exit the 5S mode, select “OFF” in step 1.
To take a snapshot in the 5-second recording
mode
Instead of pressing the recording start/stop
button in step 2, select the desired snapshot
mode in CAMERA menu ( pg. 34), then press
SNAPSHOT. The camcorder records a 5-
second still. When “5S” is set to “Anim.”, this
function is not available.
NOTE:
When “5S” is set to “Anim.”, the 5-second recording
mode is not available. Animation recording of a few
frames only is taken instead.
Night-Scope
Self-Timer
MANUAL
SELF-TIMER
OFF
ON
5-Second Recording
GR-XASIA_11Advanced.fm Page 40 Thursday, April 14, 2005 2:33 PM
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC GR-X5AC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC GR-X5AC in the language / languages: English as an attachment in your email.

The manual is 5,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info