46752
34
Zoom out
Zoom in
Previous page
1/64
Next page
MENUS FOR DETAILED ADJUSTMENT
34 EN
MasterPage: Left
CAMERA
The “m CAMERA” settings are effective when
the power switch is set to both “A” and “M”.
However, the menu settings can be changed
only when the power switch is set to “M”.
[ ] = Factory-preset
[SP]: To record in the SP (Standard Play) mode
LP: Long Play—more economical, providing 1.5
times the recording time.
NOTES:
Audio dubbing ( pg. 50) and insert editing
( pg. 49) are possible on tapes recorded in the
SP mode.
If the recording mode is switched, the playback
picture will be blurred at the switching point.
It is recommended that tapes recorded in the LP
mode on this camcorder be played back on this
camcorder.
During playback of a tape recorded on another
camcorder, blocks of noise may appear or there
may be momentary pauses in the sound.
[12BIT]: Enables video recording of stereo
sound on four separate channels. Select “12BIT”
mode if you want to perform audio dubbing
afterward. ( pg. 50) (Equivalent to the 32 kHz
mode of previous models)
16BIT: Enables video recording of stereo sound
on two separate channels. (Equivalent to the
48 kHz mode of previous models)
10X: Only optical zoom is available up to 10X for
video recording and 8X for still image recording.
[40X]*: Digital zoom is available up to 40X.
300X*: Digital zoom is available up to 300X.
* Available only when the VIDEO/MEMORY switch
is set to “VIDEO”.
[FULL]: Snapshot mode with no frame
NEGA: Nega mode
FRAME: Snapshot mode with frame
For details on the procedure, refer to “Snapshot
(For Video Recording)” ( pg. 39).
(Available when the VIDEO/MEMORY switch is
set to “VIDEO”)
OFF: Allows you to shoot dark scenes with no
picture brightness adjustment.
[AGC]: The overall appearance may be grainy,
but the image is bright.
AUTO : The shutter speed is automatically
adjusted. Shooting a subject in low or poor
lighting at slow shutter speed provides a brighter
image than in the AGC mode, but the subject’s
movements are not smooth or natural. The
overall appearance may be grainy. While the
shutter speed is being automatically adjusted,
is displayed.
(Available when the VIDEO/MEMORY switch is
set to “MEMORY”)
[AUTO] / ISO 100 / ISO 200 / ISO 400
Select the ISO sensitivity to the desired setting.
MANUAL
The q MANUAL settings are effective only
when the power switch is set to “M”.
[ ] = Factory-preset
(Available when the VIDEO/MEMORY switch is
set to “VIDEO”)
OFF: Disables the function.
[ON ]: To compensate for unstable images
caused by camera-shake, particularly at high
magnification.
NOTES:
Accurate stabilization may not be possible if hand
shake is excessive, or depending on the shooting
condition.
The “ indicator blinks or goes out if the
Stabiliser cannot be used.
Switch off this mode when recording with the
camcorder on a tripod.
Recording Menus
REC MODE
SOUND MODE
ZOOM
SNAP SHOT
GAIN UP
GAIN
DIS
[FULL]
FRAME
NEGA
GR-XASIA.book Page 34 Tuesday, April 12, 2005 8:52 PM
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC GR-X5AC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC GR-X5AC in the language / languages: English as an attachment in your email.

The manual is 5,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info