46752
28
Zoom out
Zoom in
Previous page
1/64
Next page
MasterPage: Heading0_Left
28 EN
ADDITIONAL FEATURES FOR D.S.C.
Still images can be dubbed from a tape to a
memory card.
1 Load a cassette. ( pg. 16)
2 Load a memory card. ( pg. 17)
3 Set the VIDEO/MEMORY switch to “VIDEO”.
4 Set the power switch to “PLAY” while
pressing down the lock button located on the
switch.
5 Set “ COPY” to “ON”.
( pg. 33, 38)
6 Press 4/9 to start playback.
7 At the point you want to dub, press 4/9
again to engage Still Playback.
8 To dub the image, press SNAPSHOT.
The “ ” indication appears during dubbing.
NOTES:
To use playback special effects with a video image
you wish to dub, perform up to step 8 using the
remote control. ( pg. 24)
Images are dubbed in 640 x 480 pixels.
By resetting the file name, a new folder will be
made. The new files you are going to make will
be stored in the new folder. It is convenient to
separate the new files from previously made
files.
1 Perform steps 1 3 in “Normal Playback of
Images” ( pg. 26).
2 Press MENU. The menu screen appears.
3 Press Up (4/9) or Down (8) to select “NO.
RESET”, and press SET. The NO. RESET
screen appears.
4 Press Up (4/9) or Down (8) to select
“EXECUTE”, and press SET. The new folder
(such as “101JVCGR”) will be made and the file
name of the next shot starts from DVC00001.
NOTE:
If the file name reaches DVC09999, a new folder
(such as “101JVCGR”) will be made and the file
name will start again from DVC00001.
The protect mode helps prevent the accidental
erasure of files.
1 Perform steps 1 3 in “Normal Playback of
Images” ( pg. 26).
2 Press MENU. The menu screen appears.
3 Press Up (4/9) or Down (8) to select
“PROTECT”, and press SET. The sub menu
appears.
To protect the currently displayed file
4 Press Up (4/9) or
Down (8) to select
“CURRENT”, and press
SET. The PROTECT
screen appears.
5 Press 3 or 5 to
select the desired file.
6 Press Up (4/9) or
Down (8) to select
“EXECUTE”, and press
SET.
To cancel protection,
select “RETURN”.
Repeat steps 5 and 6 for
all files you want to protect.
To protect all files stored in the memory card
4 Press Up (4/9) or Down (8) to select
“PROT.ALL”, and press SET. The PROTECT
screen appears.
5 Press Up (4/9) or Down (8) to select
“EXECUTE”, and press SET.
To cancel protection, select “RETURN”.
NOTES:
If the “ ” mark appears, the currently displayed
file is protected.
When the memory card is initialised or corrupted,
even protected files are deleted. If you do not want
to lose important files, transfer them to a PC and
save them.
Dubbing Still Images Recorded on a
Tape to a Memory Card
Resetting The File Name
Protecting Files
PROTECT
MENU
RENT
PROT . ALL
CANC . ALL
RETURN
CUR
ROTECTP
RETURN
PROTECTED
GR-XASIA.book Page 28 Tuesday, April 12, 2005 8:52 PM
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC GR-X5AC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC GR-X5AC in the language / languages: English as an attachment in your email.

The manual is 5,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info