46750
39
Zoom out
Zoom in
Previous page
1/64
Next page
EN 39
MasterPage: Start_Right
ADVANCED FEATURES
FEATURES FOR RECORDING
The flash can be used when a
snapshot is taken in Record-
Standby mode. ( pg. 25, 39)
You can select the flash
setting. Press FLASH (
5
)
repeatedly to select the
desired mode.
[ ±0A]: Fires automatically if it
is dark.
C ±0A: Fires automatically if it is dark and
reduces the red-eye effect in the subject’s eyes.
±0: Always fires.
±0S: The flash fires regardless of the shooting
condition. The shutter speed becomes slower in
this mode, so the background can be also
brightened.
OFF (No indicator): Will not fire.
[ ] = Factory-preset
If “C ±0A” is selected
The C red-eye reduction indicator lights. Press
SNAPSHOT. The flash fires twice. The first flash
is for reduction of the human eye’s red reflection
and the second flash is for the actual recording.
NOTES:
Do not fire the flash at a person at short range.
The flash does not fire when the flash is set to
“OFF” or when Night-Scope mode ( pg. 40) is
engaged, and also when the battery remaining
power is low.
The flash does not fire even if the flash is set to
“ON” when continuous shooting or bracket
shooting ( pg. 25, 39) is performed, or r” is
set to “SPORTS” or “SNOW” ( pg. 44).
When shooting a subject at a distance where the
flash light cannot reach (over approx. 2 m), set the
flash to “OFF” to prevent the picture from
becoming too dark or becoming too tinted.
While charging the flash, blinks and the flash
will not fire.
When a snapshot is taken ( pg. 25) in the dark
the camcorder fires the flash and adjusts the
brightness automatically. You can also adjust the
flash brightness manually. When you find that
the snapshots you took look too bright or too
dark, adjust it manually.
1 Select “FLASH ADJ.” in MANUAL menu, and
press SET.
The parameter appears.
2 To intensify the flash, press Up (4/9). To
weaken the flash, press Down (8).
Adjustment range: –3 to +3. (Factory-preset: ±0)
3 Press SET three times to close the menu
screen.
NOTE:
When you change the subject you are shooting or
the shooting location, set it back to ±0 as described
in step 2 and take a snapshot to check the flash
brightness. After doing this adjust to your desired
brightness.
This feature lets you record still images that look
like photographs onto a tape.
1 Set the VIDEO/MEMORY switch to “VIDEO”.
2 Set the power switch to “M”.
3 Set “SNAP SHOT” to the desired mode.
( pg. 33, 34)
4 Press SNAPSHOT.
There is the sound effect of a shutter closing.
The “O” indication appears and a still image
will be recorded for approx. 6 seconds, then the
camcorder re-enters the record-standby mode.
You can take snapshots also during video
recording. A still image will be recorded for
approx. 6 seconds, then the normal recording
resumes.
Regardless of the power switch position (“A” or
M”), snapshots are taken with the selected
snapshot mode.
The flash does not fire during recording.
Continuous Shooting
Keeping SNAPSHOT pressed in step 4 provides
an effect similar to serial photography. (Interval
between still images: approx. 1 second)
The continuous shooting mode is disabled when
“REC SELECT” is set to / ”.
( pg. 37)
Snapshot Flash
Flash Brightness Adjustment
Flash
Snapshot (For Video Recording)
GR-XASIA.book Page 39 Tuesday, April 12, 2005 8:52 PM
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC GR-X5AA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC GR-X5AA in the language / languages: English as an attachment in your email.

The manual is 5,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info