595805
23
Zoom out
Zoom in
Previous page
1/28
Next page
23
ADVANCED FEATURES
Night-Scope (GR-SXM49/SX25 only)
Makes dark subjects or areas even brighter than
they would be under good natural lighting.
1) Set the Power Switch
@ to or while
pressing down the Lock Button
! located on the
switch.
2) Press NIGHT
q repeatedly until the desired
mode appears.
A NIGHT AUTO: The shutter speed is
automatically adjusted (maximum 1/2 sec.).
1 NIGHT 20X (only when the Power Switch @
is set to ): The shutter speed is set to 2/5th of
a second to provide 20 times the sensitivity.
2 NIGHT 50X (only when the Power Switch @
is set to ): The shutter speed is set to 1 second
to provide 50 times the sensitivity.
LIGHT (only when the Power Switch @ is
set to
): The camcorders light is on and the
shutter speed is automatically adjusted (maximum
1/2 sec.).
To cancel the effect, press NIGHT
q repeatedly
until OFF appears.
During Night-Scope, the following cannot be
activated: Picture Stabiliser, Programme AE
With Special Effects, Digital Effects and S.LX
in SYSTEM MENU (
pg. 20).
Night-Scope does not work when the Video Light
mode is set to AUTO or ON (
pg. 13, Video
Light).
During Night-Scope, it may be difficult to bring the
camcorder into focus. To prevent this, use of a
tripod is recommended.
Fade/Wipe Effects
Fade- or wipe-in works at recording start, and fade-
or wipe-out works at recording end.
1) Set the Power Switch
@ to while pressing
down the Lock Button
! located on the switch.
2) Press FADE/WIPE
w repeatedly until the
desired mode appears.
3) Press the Recording Start/Stop Button
0 to
activate fade-in/out or wipe-in/out.
Pressing and holding the Recording Start/Stop
Button
0 allows you to vary the length for the
image during fade in/out or wipe in/out.
To cancel a fade or wipe, press FADE/WIPE
w
repeatedly until OFF appears.
FADER: Fades in/out to a black screen.
MOSAIC (Fader): Gradually turns/returns the
picture into/from a mosaic pattern.
SHUTTER (Wipe): A black screen moves in
from the top and bottom, closing over the image
like a shutter, or a new image pushes open the
black screen vertically from the centre.
SLIDE (Wipe): A black screen moves in from
the left to gradually cover the image, or a new
image moves in from right to left.
DOOR (Wipe): Wipes in as the two halves of
a black screen open to the left and right, revealing
the scene, or wipes out and the black screen
reappears from left and right to cover the scene.
CORNER (Wipe): Wipes in on a black screen
from the upper right to the lower left corner,
revealing the scene, or wipes out from lower left to
upper right, leaving a black screen.
WINDOW (Wipe): Wipes in on a black screen
from the centre of the screen towards the corners,
revealing the scene, or wipe out from the corners
to the centre, leaving a black screen.
GR-SXM49EK_EN 02.10.18, 11:0023
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC GR-SX25 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC GR-SX25 in the language / languages: English as an attachment in your email.

The manual is 0,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info