595805
11
Zoom out
Zoom in
Previous page
1/28
Next page
11
RECORDING
Set REC MODE, S-VHS (S-VHS ET)**, TAPE
LENGTH and DATE/TIME in SYSTEM MENU.
(
pg. 18 22, MENU SETTINGS)
1 Remove the lens cap. Set the Power Switch @
to or while pressing down the Lock
Button
! located on the switch.
Shooting while using the viewfinder: Make sure
the LCD monitor* is closed and locked.
Shooting while using the LCD monitor*: Make
sure the LCD monitor* is fully open.
The camcorder enters the Record-Standby mode
and PAUSE
D is displayed.
The viewfinder and LCD monitor cannot be used
simultaneously on this camcorder. Therefore,
when opening the LCD monitor and tilting it
upward to 180°, you cannot view any image in the
viewfinder, however you can shoot yourself while
viewing your own image in the LCD monitor.
2 Press the Recording Start/Stop Button 0.
P appears while recording is in progress.
To stop recording, press the Recording Start/Stop
Button
0. The camcorder re-enters the Record-
Standby mode.
To Adjust The Brightness Of The LCD Monitor*:
When the Power Switch
@ is set to , adjust
LCD BRIGHT in SYSTEM MENU (
pg. 18, 22).
When the Power Switch
@ is set to or
OFF, this adjustment cannot be performed.
* Applicable models only.
** GR-SXM49/SX25 only.
PLAYBACK
1 Load a tape ( pg. 8, Loading/Unloading A
Cassette).
2 Set the Power Switch @ to while
pressing down the Lock Button
! located on the
switch. To start playback, press
4
/6 &.
To stop playback temporarily (Still Playback), press
4
/6 &. To stop playback, press 5 r. Press
2
e to rewind, or
3
* to fast-forward the tape.
High-speed picture search (Shuttle Search) is
possible by pressing
2
e or
3
* during
playback (holding
2
e or
3
* down during
playback continues search until released). To
resume normal playback, press
4
/6 &.
For VIDEO RECORDING/VIDEO PLAYBACK
The camcorder shuts off automatically after about
5 minutes in the Record-Standby or Stop mode.
To turn on again, set the Power Switch
@ to
OFF, then to
, or .
When the Power Switch
@ is set to , or
and the LCD monitor* is opened at an
angle of 60 degrees or more, the LCD monitor*
switches on and the viewfinder switches off
automatically to save power.
The playback picture can be viewed in the
viewfinder (with the LCD monitor* shut), on the
LCD monitor* or on a connected TV (
pg. 15,
Connections To A TV/VCR).
To remove the indications,
pg. 21, DISPLAY or
OSD OUTPUT in SYSTEM MENU.
To control the speaker* volume, rotate the MENU
Wheel
1 towards + to turn up, or towards “–” to
turn down. While shooting, sound is not heard
from the speaker*.
If TBC (
pg. 14) is engaged during Still
Playback, noise bars will not appear
(GR-SXM49/
SX25 only).
* Applicable models only.
GR-SXM49EK_EN 02.10.18, 11:0011
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC GR-SX25 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC GR-SX25 in the language / languages: English as an attachment in your email.

The manual is 0,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info