595805
7
Zoom out
Zoom in
Previous page
1/28
Next page
7
The following steps have the same function as
REFRESH (
pg. 6).
1. Attach the battery to the camcorder with no
cassette inserted.
2. Set the Power Switch
@ to or while
pressing down the Lock Button
! located on
the switch.
During charging or discharging, the camcorder
cannot be operated.
Charging and discharging is not possible if the
wrong type of battery is used.
When charging the battery pack for the first time
or after a long storage period, the CHARGE lamp
) may not light. Remove the battery pack from
the camcorder, then try charging again.
If a fully-charged batterys operation time remains
extremely short, the battery is worn out. Please
purchase a new one.
Perform charging where the temperature is
between 10°C and 35°C. 20°C to 25°C is the ideal
temperature range for charging. If the environment
is too cold, charging may be incomplete.
Charging time varies according to the ambient
temperature and the status of the battery pack.
Since the AC Adapter processes electricity
internally, it becomes warm during use. Be sure to
use it only in well-ventilated areas.
The following operation stops charging or
discharging:
Set the Power Switch
@ to , or .
Disconnect the AC Adapter from the camcorder.
Unplug the AC Adapters power cord from the
AC outlet.
Detach the battery from the camcorder.
Using the optional AA-V15EG AC Power Adapter/
Charger, you can charge the BN-V11U/V12U/
V20U/V400U battery pack without the camcorder.
However, it cannot be used as an AC adapter.
To avoid interference with reception, do not use
the AC Adapter near a radio.
Recording time is reduced significantly when
Zoom or Record-Standby mode is engaged
repeatedly or the LCD monitor* is used
repeatedly.
Before extended use, it is recommended that you
prepare enough battery packs to cover 3 times the
planned shooting time.
* Applicable models only.
Date/Time Settings
1) Set the Power Switch @ to while pressing
down the Lock Button
! located on the switch.
2) Press the MENU Wheel
1 in. The Menu Screen
appears.
3) Rotate the MENU Wheel
1 to select
4
TO SYSTEM MENU and press it to display
SYSTEM MENU. Rotate the MENU Wheel
1 to
select
4
NEXT and press it to display the next
page.
4) Rotate the MENU Wheel
1 to select DATE/
TIME and press it. The DATE/TIME Menu
appears.
5) To set YEAR, MONTH, DAY or TIME
(hour/minute), rotate the MENU Wheel
1 to
select the desired item, and press it. When the
setting begins blinking, rotate the MENU Wheel
1 until the correct setting appears and then
press it. The setting stops blinking.
6) When none of these settings (YEAR,
MONTH, DAY, TIME) blinks, rotate the
MENU Wheel
1 to select
4
EXIT, and press it.
The Menu Screen reappears with the highlight
bar on
4
RETURN.
7) Press the MENU Wheel
1 in to close the Menu
Screen.
To display the date and time in the camcorders
display and on a connected TV, see DATE/TIME
DISP. (
pg. 21) in SYSTEM MENU.
The date/time cannot be stored in memory if the
built-in clock battery runs out. Consult an
authorised JVC dealer for replacement, or set the
date/time as necessary before you start shooting.
Y
M
D
T
t
E
O
A
I
E
A
N
Y
M
X
R
T
E
I
H
T
DATE T I M
2
E
2
0
0
:
0
2
2
2
6
8
0
1
@
!
24-hour
indication
GR-SXM49EK_EN 02.10.18, 10:597
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC GR-SX25 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC GR-SX25 in the language / languages: English as an attachment in your email.

The manual is 0,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info