595808
34
Zoom out
Zoom in
Previous page
1/92
Next page
34 EN
Master Page: Left
To Print By Selecting Still Images And Number
Of Prints
1
Perform steps 1 6 in “To Print All Still Images
(One Print For Each)” ( pg. 33).
2 Rotate the MENU Wheel
to select “CURRENT”, and
press it. The DPOF screen
appears.
3 Press 3 or 5 to
select the desired file.
4 Rotate the MENU Wheel to select the number
indication (00), and press it.
5 Select the number of prints
by rotating the MENU
Wheel towards “R” to
increase number, or
towards “T” to decrease
the number, and press it.
Repeat steps 3 through 5
for the desired number of prints.
The number of prints can be set up to 15.
To correct the number of prints, select the
image again and change the number.
6 Rotate the MENU Wheel
to select “RETURN”, and
press it. The “SAVE?”
appears.
If you did not change
any settings in step 3
through 5, the Menu
Screen reappears.
7 Rotate the MENU Wheel to select “EXECUTE” to
save the setting you have just made, and press it.
To cancel selection, select “CANCEL”.
To Reset The Number Of Prints
1
Perform steps 1 6 in “To Print All Still Images
(One Print For Each)” ( pg. 33).
2 Rotate the MENU Wheel to select “RESET”, and
press it. The DPOF screen appears.
3 Rotate the MENU Wheel to select “EXECUTE”,
and press it. The normal playback screen
appears.
To cancel selection, select “RETURN”.
The number of prints is reset to 0 for all still
images.
You can initialize a memory card any time.
After initializing, all files and data stored in the
memory card, including those which have been
protected, are cleared.
1 Set the Playback Mode Switch to “MEMORY”.
2 Set the Power Switch to “P” while pressing
down the Lock Button located on the switch.
3 Open the LCD monitor fully, or pull out the
viewfinder fully.
4 Press the MENU Wheel in.
The Menu Screen appears.
5 Rotate the MENU Wheel
to select “FORMAT”, and
press it. The FORMAT
screen appears.
6 Rotate the MENU Wheel
to select “EXECUTE”, and
press it. The memory card
is initialized.
When initialization is finished, “NO IMAGES
STORED” appears.
To cancel initialization, select “RETURN”.
CAUTION:
While performing the above, never disconnect
power, as this may cause the memory card to be
corrupted.
RETURN
SHEETS
DPOF
00
SHEETS
DPOF
05
DPOF
EXECUTE
SAVE?
CANCE L
Initializing A Memory Card
CAUTION:
Do not perform any other operation (such as
turning off the camcorder) during initialization.
Also, be sure to use the provided AC Power
Adapter/Charger, as the memory card may be
corrupted if the battery becomes exhausted during
initialization.
MENU
DISPLAY
BR I GHT
END
PROTECT
DELETE
DPOF
NO . RE SE T
FORMAT
ORMA TF
EXECUTE
DATA?EX I ST I NG
ERASE ALL
RETURN
D.S.C. PLAYBACK (cont.)
GR-HD1US.book Page 34 Monday, April 14, 2003 5:21 PM
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC GR-HD1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC GR-HD1 in the language / languages: English as an attachment in your email.

The manual is 6,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info